Soundcore Icon A3122 Manuel utilisateur
User Manual
Soundcore Icon
Safety Instructions
① Avoid dropping.
② Do not disassemble.
③ Avoid extreme temperatures.
④ Do not use the device outdoors during thunderstorms.
⑤ Use original or certified cables.
⑥ Do not use any corrosive cleaner / oil to clean.
Using Your Soundcore Icon
1. Turn On / Off
ON Press
OFF Press and hold for more than 2 second
Model:A3122
a. Bluetooth mode
Flashing Blue
Bluetooth Pairing Mode
Solid Blue
Connected to a device
Enter True Wireless Stereo Group Mode /
Disconnect True Wireless Stereo
Flashing White
True Wireless Stereo Group Mode
Solid White Connected to True Wireless Stereo
With True Wireless Stereo technology, you can pair your Soundcore Icon with
another Soundcore Icon to explore the best sound effects with left and right sound
channels separated on both speakers.
Play / Pause
Play Next Song
Play Previous Song
Answer Call / End Call
Reject Call / Switch between a call on hold and an active call
End current call and answer incoming call / End current call and switch
to call on hold
Switch audio source between Speaker and Phone
Put current call on hold and answer incoming call
Activate Siri / Other Voice Control Software
Volume Up / Down
Solid White On a Call
Flashing Blue
Incoming Call
When turned on, Soundcore Icon will automatically connect to the last connected
device if available. If not, press the Bluetooth pairing button to activate pairing
mode.
To pair a different device, press the Bluetooth button to re-enter pairing mode. Then
repeat the pairing steps.
Having connection problems? Remove Soundcore Icon from your device’s
Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To
get the best sound quality, make sure there is a clear line of sight between the
connected device and your speaker.
b. AUX-In mode
*SoundLine AUX cable sold separately.
Plugging in an audio cable will automatically switch to AUX mode.
When using AUX mode, control audio playback via the connected device.
3. Charging your Soundcore Icon
Slow Flashing Red
Low Battery
Solid Red
Charging
Off Fully Charged
Use the included USB cable to charge your Soundcore Icon and make sure it is fully
charged before its first use.
Disconnect your speaker from the charger when fully charged. Do not charge your
speaker for extended periods.
When not in use, store your speaker in a cool place.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the radio equipment type A3122 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
https://www.anker.com/products
Maximum output power:1.5dBm
Frequency band: 2.4G band (2.4000GHz-2.4835GHz)
Specifications
*Specifications are subject to change without notice.
.
Input 5 V ⎓1 A
Audio output 10w
Battery capacity max. 2600 mAh
Charging time 4.0 hours
Playtime (varies by volume level and music content) 12hrs
Size 182 x 61 x 62 mm /
7.2 x 2.4 x 2.4 inch
Weight (without packaging) 349 g / 12.3 oz
Bluetooth version V5.0
Bluetooth range 20 m / 66 ft
Product Number A3122
Bluetooth Speaker / Soundcore Icon
FCC Statement:
The device has been evaluated to meet general RF exposure requirement, The device can
be used in portable exposure condition without restriction Federal Communication
Commission (FCC) Radiation.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications or changes to this equipment. Such modifications or changes
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
IC NOTICE TO CANADIAN USERS:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device .
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
(Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.)
Radiation Exposure Statement
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled
environment and are safe for intended operation as described in this manual.
Déclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les
Etats-Unis et le Canada établies pour un environnement non contrôlé.
Table des matières
Autres manuels Soundcore Intervenants
Soundcore
Soundcore A3107 Manuel utilisateur
Soundcore
Soundcore Motion B Manuel utilisateur
Soundcore
Soundcore Infini Mini A3370 Manuel utilisateur
Soundcore
Soundcore Flare Mini Manuel utilisateur
Soundcore
Soundcore Motion+ Manuel utilisateur
Soundcore
Soundcore Rave Manuel utilisateur
Soundcore
Soundcore Motion X500 Manuel utilisateur
Soundcore
Soundcore A3391Z12 Manuel utilisateur
Soundcore
Soundcore Rave Party 2 Manuel utilisateur
Soundcore
Soundcore Zero Manuel utilisateur
Soundcore
Soundcore Trance Manuel utilisateur
Soundcore
Soundcore Rave Neo Manuel utilisateur
Soundcore
Soundcore Glow Mini Manuel utilisateur
Soundcore
Soundcore Rave Neo 2 Manuel utilisateur
Soundcore
Soundcore Rave Neo Manuel utilisateur
Soundcore
Soundcore Select Pro A3126 Manuel utilisateur
Soundcore
Soundcore Motion X500 Manuel utilisateur
Soundcore
Soundcore Motion+ Manuel utilisateur
Soundcore
Soundcore Infini 2 Manuel utilisateur
Soundcore
Soundcore A3399 Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur