Sony TMR-BT10 - Bluetooth Wireless Audio... Manuel utilisateur

Portable Stereo

Transmitter

2-698-600-41(1)

TMR-BT10

Operating Instructions

Manual de instrucciones ES

WARNING

To reduce the risk of fire or electric

shock, do not expose this

apparatus to rain or moisture.

To reduce the risk of electrical

shock, do not open the cabinet.

Refer servicing to qualified

personnel only.

Do not install the appliance in a

confined space, such as a bookcase or

built-in cabinet.

To reduce the risk of fire, do not cover the

ventilation of the apparatus with

newspapers, tablecloths, curtains, etc.

And do not place lighted candles on the

apparatus.

To reduce the risk of fire or electric

shock, do not place objects filled with

liquids, such as vases, on the apparatus.

Connect the AC power adaptor to an

easily accessible AC outlet. Should you

notice an abnormality in the AC power

adaptor, disconnect it from the AC outlet

immediately.

For the customers in the USA

Owner’s Record

The model number is located at the side

of the unit, and the serial number is

located inside the holding clip.

Record these numbers in the spaces

provided below. Refer to them whenever

you call upon your Sony dealer regarding

this product.

Model No. TMR-BT10

Serial No.

Information

This device complies with Part 15 of FCC

Rules and RSS-Gen of IC Rules.

Operation is subject to the following two

conditions: (1) this device may not cause

interference, and (2) this device must

accept any interference, including

interference that may cause undesired

operation of this device.

You are cautioned that any changes or

modifications not expressly approved in

this manual could void your authority to

operate this equipment.

This equipment must not be co-located or

operated in conjunction with any other

antenna or transmitter.

This equipment complies with FCC/IC

radiation exposure limits set forth for

uncontrolled equipment and meets the

FCC radio frequency (RF) Exposure

Guidelines in Supplement C to OET65

and RSS-102 of the IC radio frequency

(RF) Exposure rules. This equipment has

very low levels of RF energy that it is

deemed to comply without testing of

specific absorption ratio (SAR).

The Bluetooth word mark and logos are

owned by the Bluetooth SIG, Inc. and any

use of such marks by Sony Corporation is

under license.

Other trademarks and trade names are

those of their respective owners.

MPEG Layer-3 audio coding technology

and patents licensed from Fraunhofer IIS

and Thomson.

Table Of Contents

Welcome! .......................... 4

3 steps to BLUETOOTH

function ................................. 5

Location and Function of

Parts............................... 6

Charging the unit ............. 7

Pairing ............................... 9

What is pairing? ........................ 9

Procedures of pairing ................ 9

Indications of

BLUETOOTH function

.. 11

Listening to music ......... 12

Disposing of the unit ..... 14

Precautions .................... 15

What is BLUETOOTH

technology? ................ 17

Troubleshooting ............. 18

Initializing the unit ......... 20

Specifications ................. 21

For the customers in the USA

and Canada

RECYCLING LITHIUM-ION

BATTERIES

Lithium-Ion batteries

are recyclable.

You can help preserve

our environment by

returning your used

rechargeable batteries to

the collection and

recycling location nearest you.

For more information regarding

recycling of rechargeable batteries, call

toll free 1-800-822-8837, or visit

http://www.rbrc.org/

Caution: Do not handle damaged or

leaking Lithium-Ion batteries.

Pour les utilisateurs au Canada

Informations

Cet appareil est conforme à la section 15 de

la réglementation FCC ainsi qu’à la RSS-Gen

de la réglementation IC. Son utilisation est

autorisée seulement aux conditions suivantes:

(1) il ne doit pas produire de brouillage et (2)

l’utilisateur du dispositif doit être prêt à

accepter tout brouillage radioeléctrique reçu,

même si ce brouillage est susceptible de

compromettre le fonctionnement du

dispositif.

Vous devez savoir que tout changement ou

toute modification non expressément

approuvé dans ce mode d’emploi risque

d’annuler votre pouvoir d’utiliser cet appareil.

Cet équipement est conforme aux limitations

concernant l’exposition aux radiations

établies par la FCC/IC définies dans un

environnement non contrôlé ainsi qu’aux

directives relatives à l’exposition aux

fréquences radio (RF) FCC du supplément C

du bulletin OET65 et au règlement RSS-102

relatif à l’exposition aux radiofréquences

(RF) IC. Cet équipement présente des

niveaux d’énergie RF très bas considérés

comme conformes et ne nécessite pas de test

du débit d’absorption spécifique (SAR).

Welcome!

Thank you for purchasing this Sony Portable Stereo Transmitter. This unit

uses BLUETOOTH™ wireless technology.

This unit can transmit stereo audio signal to a BLUETOOTH stereo audio

receiving device (headset, car audio unit, stereo component system, etc.) *.

By converting a regular stereo audio signal input (analog) from the

connected stereo audio source device to digital stereo audio signal and

transmitting it wirelessly, you can enjoy listening to the music of your stereo

audio source device connected to this unit (portable audio player, computer,

etc.).

*BLUETOOTH devices to be connected with this unit are required to support A2DP

(Advanced Audio Distribution Profile).

Enjoy listening to music

3 steps to BLUETOOTH function

In the example below, we explain how to transmit music played on your

audio device connected to this unit and listen to music on a BLUETOOTH

stereo audio receiving device (headphone, stereo audio system, etc.).

Pairing

Enables a BLUETOOTH stereo audio receiving device and this unit to

recognize one another.

BLUETOOTH connection

Turning on this unit

automatically makes the

BLUETOOTH connection

between this unit and the

BLUETOOTH stereo audio

receiving device.

Transmitting music

You can enjoy listening to

music played on the portable

audio player, etc., connected

to this unit through the

BLUETOOTH audio

receiving system.

Portable Stereo

Transmitter

Connection

Pairing

Stereo audio

signal

(Streaming)

Audio

device

For more details, see pages 9 - 10.

For more details, see page 12 - 13.

BLUETOOTH stereo

audio receiving device

Location and Function of Parts

GETTING STARTED

1Initialize button

2Indicator (red)

Indicates the power status of

the unit.

3Indicator (blue)

Indicates the communication

status of the unit.

4POWER button

5Audio in plug (Gold-

plated L-shaped stereo

mini plug)

Connects to the headphone

jack of a portable audio

player, etc.

6RESET button

Press when the unit becomes

inoperative.

Pairing information is not

deleted by this operation.

7Holding clip

Adjust the holding clip to the

desired angle and clip to your

bag.

8Terminal for the battery

charging stand

1Connect the supplied

AC power adaptor with

the battery charging

stand.

2Connect the supplied

AC power adaptor to an

AC outlet.

Charging the unit

The unit contains a rechargeable Lithium-Ion battery, which should be

charged before using for the first time.

Battery charging

stand (supplied) (Rear)

AC power

adaptor

(supplied)

3Put the unit on the

battery charging stand.

Note

If the holding clip is turned, the unit

cannot be set on the battery charging

stand and charging does not start.

Turn the holding clip back to the

original position before charging.

Rest the unit on the battery

charging stand so that the unit’s

terminal for the battery charging

stand meets the contact pin on

the battery charging stand, and

make sure that the indicator

(red) lights up.

Charging is completed in

about 3 hours* and the

indicator (red) goes off

automatically.

*Time required for empty battery

to recharge.

Tip

When charging the battery, the unit is

turned off automatically.

Continued

To an AC

outlet

Portable Stereo

Transmitter

Contact pin

Battery charging

stand (supplied)

Status

Full

Mid

Low

(needs to

charge)

Approx.

usage hours

11 hours

Usage hours*

Status

Music playback

time (up to)

*Time stated above may vary, depending

on ambient temperature or conditions of

use.

Checking the remaining

battery

When pressing the POWER button

while the unit is turned on, the

indicator (red) flashes. You can

check the remaining battery by the

number of times the indicator (red)

flashes.

Indicator (red)

3 times

2 times

1 time

Note

You cannot check the remaining battery

immediately after the unit is turned on, or

during the procedure for pairing.

When the battery is almost empty

The indicator (red) flashes slowly

automatically.

When the battery becomes empty, the unit

will turn off automatically.

Caution

If this unit detects a problem while

charging, the indicator (red) may

turn off, although charging is not

complete.

Check for the following causes:

–Ambient temperature exceeds the range

of 0 °C – 40 °C (32 °F – 104 °F).

–There is a problem with the battery.

In this case, charge again within the

above-mentioned temperature range.

If the problem persists, consult your

nearest Sony dealer.

Notes

•If the battery is not used for a long time,

battery may be quickly depleted,

however, after a few recharges, battery

life will improve.

•If the life of the built-in rechargeable

battery drops to half the normal length,

the battery should be replaced. Consult

your nearest Sony dealer for

replacement of the rechargeable battery.

•Avoid exposure to temperature

extremes, direct sunlight, moisture,

sand, dust or mechanical shock. Never

leave in a car parked in the sun.

•Use only the supplied AC power

adaptor. Do not use any other AC

power adaptor.

Pairing

Continued

What is pairing?

BLUETOOTH devices need to be

“paired” with each other beforehand.

Once BLUETOOTH devices are

paired, there is no need for pairing

again, except in the following cases:

•When pairing information is

deleted after repair, etc.

• When this unit is paired with 9 or

more devices.

This unit can be paired with 8

BLUETOOTH devices; if a new

device is paired after 8 devices

have been paired, the device

whose latest connection time is

the oldest among the 8 paired

devices is replaced by the new

one.

•When recognition of the unit by

the device to be connected is

deleted.

•When this unit is initialized.

All pairing information is deleted.

Note

Passcode* of this unit is fixed at “0000.”

This unit cannot be paired with a

BLUETOOTH receiving device whose

Passcode is not “0000.”

*Passcode may be called “Passkey,”

“PIN code,” “PIN number,” or

“Password.”

Procedures of pairing

1Place a BLUETOOTH

receiving device within

1 m (3 ft) of this unit.

Press and hold the

POWER button for 7

seconds or more to

standby for pairing while

the unit is turned off.

The indicator (blue) and the

indicator (red) start flashing

together and this unit starts

searching the BLUETOOTH

receiving device.

Notes

•After about 3 seconds, power is

turned on and the indicator

(blue) and indicator (red) flash

together twice. Keep the button

pressed without releasing until

both indicators start flashing

together, then release the button.

This unit enters into pairing

mode.

•

If pairing is not established

within about 5 minutes, pairing

mode will be canceled and this

unit will turn off. In this case,

start over from step 1.

3Set the BLUETOOTH

receiving device to

pairing mode.

This unit searches the

BLUETOOTH receiving

device automatically, and

pairs the device.

The unit tries to connect the

BLUETOOTH receiving

device soon after detecting it.

When the BLUETOOTH

connection is made properly,

the indicator (red) goes off

and the indicator (blue) starts

flashing more slowly,

indicating pairing is complete

and pairing information is

memorized on this unit.

Notes

•If Passcode input is required on

the BLUETOOTH receiving

device, input “0000.”

•The message standing for

“Pairing complete” appears on

the display of some

BLUETOOTH receiving

devices.

•When pairing is complete, some

BLUETOOTH devices may

connect with the unit

automatically.

Tips

•To pair with other BLUETOOTH

devices, repeat steps 1to 3for each

device.

•To delete all pairing information, see

“Initializing the unit” (page 20).

Autres manuels pour TMR-BT10 - Bluetooth Wireless Audio...

Table des matières

Langues :

Autres manuels Sony Émetteur

Sony

Sony RSE-500 Manuel utilisateur

Sony

Sony DWT-B01 Manuel utilisateur

Sony

Sony DCC-NWFMT1 Manuel utilisateur

Sony

Sony TMR-BT8iP - Bluetooth Wireless Transmitter Manuel utilisateur

Sony

Sony WRT-822A Manuel utilisateur

Sony

Sony WRT-808A Manuel utilisateur

Sony

Sony DCC-FMT50U Manuel utilisateur

Sony

Sony WRT-847A Manuel utilisateur

Sony

Sony TMR-BT8iP - Bluetooth Wireless Transmitter Manuel utilisateur

Sony

Sony AIR-PC10T Marketing Specifications... Manuel utilisateur

Sony

Sony IFV-FX1 Manuel utilisateur

Sony

Sony TMR-RF930 Manuel utilisateur

Sony

Sony AIR-SA17Ti Marketing Manuel utilisateur

Sony

Sony TMR-BT10 - Bluetooth Wireless Audio... Manuel utilisateur

Sony

Sony TMR-RF450R Manuel utilisateur

Sony

Sony TMR-PJ1 Manuel utilisateur

Sony

Sony WRT-8P Manuel utilisateur

Sony

Sony WRT-822A Manuel utilisateur

Sony

Sony TMR-BT8iP - Bluetooth Wireless Transmitter Manuel utilisateur

Sony

Sony DWT-B03R Manuel utilisateur

Sony

Sony TMR-BR100 Manuel utilisateur

Sony

Sony DWT-B01N Manuel utilisateur

Sony

Sony TMR-IF130 Manuel utilisateur

Sony

Sony TMR-BT10 - Bluetooth Wireless Audio... Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur