Sony SDX-420C Manuel utilisateur

AIT Drive

SDX-420C/R

User’s Guide

This document contains proprietary

information which is protected by

document may be photocopied,

reproduced or translated to another

language without prior written consent

of Acer.

The information contained in this

document is subject to change without

notice.

Acer MAKES NO WARRANTY OF

ANY KIND WITH REGARD TO

THIS DOCUMENT.

Acer shall not be liable for error

contained herein, indirect, special,

incidental or consequential damages in

connection with the furnishing,

performance or use of this document.

VORSICHT

Diese Ausrüstung erfüllt die

Europäischen EMC-Bestimmungen für

die Verwendung in folgender /

folgenden Umgebung(en):

• Wohngegenden

• Gewerbegebiete

• Leichtindustriegebiete

(Diese Ausrüstung erfüllt die

Bestimmungen der Norm EN55022,

Klasse B.)

Contents

Introduction ....................................... 4

Product Features ........................ 4

Precautions ................................5

Installation .........................................6

Jumper Setting...........................6

Option Switches (DIP Switch) .. 7

Mounting Holes........................8

Orientation.................................9

Operation .........................................10

Location of 3 LEDs .................10

LED Indication for Drive

Status ...................................11

Drive Operation....................... 12

Emergency Tape Removal

Procedure .............................13

Interface Implementation................. 16

Supported ATA Commands ....16

Supported ATAPI Packet

Commands ...........................16

Specification ....................................17

Product Specifications............. 17

Acer Contact ....................................19

SDX-420C/R Tape Drive

The SDX-420C/R drive is a high capacity data storage device using

Advanced Intelligent tape AIT (Advanced Intelligent Tape) technology.

The SDX-420C/R drive achieves high data reliability through Read-After-

Write, an additional level of Error Correction Code, and other features.

The SDX-420C/R drive stores data on tape using a standard format called

AIT and ALDC formats.

Introduction

Product Features

* This is assuming 2.6 : 1 compression ratio.

•Supported Format : AIT-1 (SDX-420C/R)

•Burst Transfer Rate 66 MBytes/sec Ultra DMA (mode 4)

•Large 10 MByte Buffer Memory

•5.25”Half Height

•ATA/ATAPI-5 Interface

•Support Fixed Record Length Only

•Frame Rewrite Function

•Three levels of Error Correction Code (ECC)

•High Speed search (120 times normal Read/Write speed)

•Random Read, Append Write

Data Capacity

Transfer Rate

(sustained)

SDX-420C/R series

35 GByte uncompressed

(with AIT-1 230 m tape)

91 GByte compressed *

(with AIT-1 230 m tape)

4 MByte/sec uncompressed

10.4 MByte/sec compressed *

Precautions

Installation

Avoid placing the drive in a location subject to:

–high humidity

–high temperature

–mechanical shock and vibration

–direct sunlight

Operation

•Do not move the drive while it is operating. It may cause malfunction.

•Avoid exposing the drive to sudden changes from a low to high in

temperature. This may cause water condensation to collect inside the

drive. If the ambient temperature should suddenly rise while the drive is

turned on , wait at least one hour before turning on the drive. If you

attempt to operate the drive immediately after a sudden increase in

temperature, a malfunction may occur.

•Turning off the power to the drive while it is writing to tape may cause

the tape to become unreadable. All previously negotiated parameters will

be lost, whenever power to the drive is cycled.

Transportation

•Keep the original packing materials to facilitate transportation of the

drive.

•Always remove the tape before moving the drive. After removing the

drive from the computer, repack the drive into its original packing.

Installation

Jumper Setting

Master

Slave

Cable Select

No Connection

Jumpers Drive Setting

Master

Slave

Cable Select

IDE Interface Connector

Power Connector

4 3 2 1

5V GND GND 12V

Option Switches (DIP Switch)

DIP Switch Positions

12345678

DIP Switch

1 Reserved (OFF)

2 Reserved (OFF)

3 Reserved (OFF)

4 Reserved (OFF)

5 Reserved (OFF)

6 Reserved (OFF)

7 DC Control (1) (ON)

8 DC Control (2) (OFF)

Data Compression Control DIP switch

Data compression can be selected by DIP switches. Data compression is

enabled while position 7 [DC Control (1)] is ON. Control by host can be

disabled when position 8 [DC Control (2)] is ON.

Mounting Holes

For 5.25" Half Height (SDX-420C/R)

[0.61" ±0.02"]

15.6 ±0.5 mm

[0.72" ±0.02"]

18.4 ±0.5 mm

[1.41" ±0.02"]

35.9 ±0.5 mm [0.72" ±0.02"]

18.2 ±0.5 mm

[1.35" ±0.02"]

34.3 ±0.5 mm

[2.76" ±0.01"]

70.0 ±0.3 mm

[6.1" ±0.02"]

155.0 ±0.5 mm [0.3" ±0.02"]

7.6 ±0.5 mm

[3.65"]

92.71 mm

4-3M

4-M3

[1.87" ±0.01"]

47.5 ±0.3 mm

[3.12" ±0.01"]

79.2

0.3 mm

[0.39" ±0.02"]

9.9 ±0.5 mm

[0.86" ±0.02"]

21.8 ±0.5 mm

[1.22" ±0.01"]

31.0 ±0.3 mm [1.65" ±0.01"]

42.0 ±0.3 mm

[0.56" ±0.01"]

14.4 ±0.3 mm

[4" ±0.02"]

101.6 ±0.5 mm

[3.7" ±0.01"]

94.0 ±0.3 mm

[5.5" ±0.02"]

139.6 ±0.5 mm

[5.87" ±0.02"]

149.0 ±0.5 mm

[1.62" ±0.02"]

41.2 ±0.5 mm

[1.51"]

38.4 mm

[1.87" ±0.01"]

47.5 ±0.3 mm [3.12" ±0.01"]

79.2 ±0.3 mm

[0.31"]

8 mm

[0.19" ±0.02"]

4.7 ±0.5 mm

[2.54" ±0.01"]

62.4 ±0.3 mm

6-M3(depth 2.5mm (0.10") max.)

Orientation

10°

10°10°10°

Operation

Location of 3 LEDs

There are three LED indications (BUSY,TAPE and STATUS) and an

EJECT button on the front panel of the unit.

Front Panel (for 3.5" Standard Height)

BUSY TAPE STATUS

Advanced

Intelligent

Tape

BUSY TAPE STATUS

Autres manuels pour SDX-420C

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sony Stockage

Sony

Sony SRR1000 Manuel utilisateur

Sony

Sony AITE260 - AIT E260/S Tape Drive Manuel utilisateur

Sony

Sony MICROVAULT USM16SA2 Manuel utilisateur

Sony

Sony SR-2A1 Manuel utilisateur

Sony

Sony Personal Content Station Manuel utilisateur

Sony

Sony SDX-800V Series Manuel utilisateur

Sony

Sony HDPS-M10 - Data Storage Wallet Manuel utilisateur

Sony

Sony ODS-L60E Manuel utilisateur

Sony

Sony SDX-250V Manuel utilisateur

Sony

Sony MSHX16G - Memory Stick PRO-HG Duo HX 16 GB Manuel utilisateur

Sony

Sony RMO-S561 Manuel utilisateur

Sony

Sony SDX-700C Manuel utilisateur

Sony

Sony 1GN Manuel utilisateur

Sony

Sony SDX-900V Series Instructions d'installation

Sony

Sony VAIO PCGA-HD740 Manuel utilisateur

Sony

Sony MicroVault USM1GL Manuel utilisateur

Sony

Sony AIT-SDX560 Instructions d'installation

Sony

Sony StorStation AITi130 Manuel utilisateur

Sony

Sony VPCL135FX Mode d’emploi

Sony

Sony SDX-1100V/R Manuel utilisateur

Sony

Sony SDT-9000 Series Manuel utilisateur

Sony

Sony MicroVault USM1GH Manuel utilisateur

Sony

Sony VAIO VGP-UHDM08 Manuel utilisateur

Sony

Sony SDZ-100 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur