Sony SDX-D1100V Manuel

SDX-D1100V/D900V/D800V/D700V/D500V/D400V

AIT Drive Unit

2-176-211-16(1)

Operator’s Guide

2Safety Regulations

Safety Regulations

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial

number in the space provided below.

Refer to them whenever you call upon your dealer regarding this product.

Model No. Serial No.

________________________ __________________________________

Information

WARNING

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

Model No. for Regulatory Compliance

Your SDX-D1100V is assigned a Model No.: SDX-D1100 for regulatory

compliance certifications.Your SDX-D900V and SDX-D800V are assigned a

Model No.:ATDEA4 for regulatory compliance certifications. Your

SDX-D700V is assigned a Model No.: ATDEA3 for regulatory compliance

certifications. Your SDX-D500V and SDX-D400V are assigned a Model

No.: ATDEA2 for regulatory compliance certifications. The number is

indicated on the model number label on your drive along with the rated

voltage and current.

For the customers in the USA

You are cautioned that any changes or modifications not expressly approved

in this manual could void your authority to operate this equipment.

DECLARATION OF CONFORMITY

Trade Name: SONY

Model: SDX-D1100, ATDEA4, ATDEA3, ATDEA2

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo San Diego, CA.

92127 U.S.A.

Telephone number: 858-942-2230

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Safety Regulations 3

WARNING

Note: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

All interface cables used to connect peripherals must be shielded in order to

comply with the limits for a digital device pursuant to Subpart B of Part 15 of

FCC Rules.

CAUTION

The mains plug on this equipment must be used to disconnect mains power.

Please ensure that the socket outlet is installed near the equipment and shall

be easily accessible.

ACHTUNG

Zur Trennung vom Netz ist der Netzstecker aus der Steckdose zu ziehen,

welche sich in der Nähe des Gerätes befinden muß und leicht zugänglich

sein soll.

Hinweis

Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste

Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779.

NOTICE

Use the power cord set approved by the appropriate testing organization for

the specific countries where this unit is to be used.

HINWEIS

Die 3-adrige Geräteanschlußleitung muß Typ H05VV-F oder H05VVH2-F

sein und nach DIN VDE 0625 geprüft sein. Der Stecker und die

Gerätesteckdose müssen nach DIN VDE 0620 bzw DIN VDE 0625 geprüft

sein. Der Leitungsquerschnitt kann 0,5 mm2betragen wenn die

Anschlußleitung eine Länge von 2 m nicht überschreitet. Anderenfalls muß

der Leitungsquerschnitt mindestens 0,75 mm2betragen.

If you have any questions about this product, please refer to Sony contact in

the instruction manual.

4Safety Regulations

ATTENTION

According to the EU Directives related to product safety, EMC and R&TTE

the manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku

Tokyo, 108-0075 Japan. The Authorised Representative is Sony Deutschland

GmbH, Hedelfinger Strasse 61,70327 Stuttgart, Germany. For any service or

guarantee matters please refer to the addresses given in separate service or

guarantee documents.

AUFMERKSAMKEIT

Im Sinne der EU Richtlinien bezüglich Produktsicherheit, EMV und R&TTE

ist Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan der

Hersteller dieses Produktes. Bevollmächtigter ist Sony Deutschland GmbH,

Hedelfinger Strasse 61, D-70327 Stuttgart. Für Service oder

Garantieangelegenheiten wenden Sie sich bitte an die in separaten Service

oder Garantiedokumenten angegebenen Adressen.

European Union Restriction of Hazardous Substances Directive

compliant.

Entspricht der Richtlinie der Europäischen Union zur

Beschränkung der Verwendung gefährlicher Stoffe.

Für Kunden in Deutschland

Diese Ausrüstung erfüllt die Europäischen EMC-Bestimmungen für die

Verwendung in folgender/folgenden Umgebung(en):

– Wohngegenden

– Gewerbegebiete

– Leichtindustriegebiete

(Diese Ausrüstung erfüllt die Bestimmungen der Norm EN 55022, Klasse

B.)

Safety Regulations 5

IMPORTANT SAFEGUARDS

For your protection, please read these safety instructions completely before

operating the appliance, and keep this manual for future reference.

Carefully observe all warnings, precautions and instructions on the appliance, or

described in the operating instructions and adhere to them.

USE

Power Sources – This unit should be operated only from the type of power

source indicated on the marking label. If you are not sure of the type of electrical

power, consult your dealer or local power company.

For the unit with a three-wire grounding type ac plug:

If you are unable to insert the plug into the outlet, contact your electrician to have

a suitable plug installed. Do not defeat the safety purpose of the grounding plug.

AC Power cord:

The AC power cord should have appropriate safety approvals or marking for the

country in which the equipment will be used. Consult your dealer or local power

company.

Cleaning – Unplug the unit from the wall outlet before cleaning or polishing it.

Do not use liquid cleaners or aerosol cleaners.

Use a cloth lightly dampened with water for cleaning the exterior of the unit.

Object and Liquid Entry – Never push objects of any kind into the unit through

openings as they may touch dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of any kind on the unit.

6Safety Regulations

INSTALLATION

Water and Moisture – Do not use power-line operated units near water - for

example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet

basement, or near a swimming pool, etc.

Power-Cord Protection – Route the power cord so that it is not likely to be

walked on or pinched by items placed upon or against it, paying particular

attention to the plugs, receptacles, and the point where the cord exits from the

appliance.

Accessories – Do not place the unit on an unstable cart, stand, tripod, bracket, or

table. The unit may fall, causing serious injury to a child or an adult, and serious

damage to the unit. Use only a cart, stand, tripod, bracket, or table recommended

by the manufacturer.

Ventilation – The slots and openings in the cabinet are provided for necessary

ventilation. To ensure reliable operation of the unit, and to protect it from

overheating, these slots and openings must never be blocked or covered.

•Never cover the slots and openings with a cloth or other materials.

•Never block the slots and openings by placing the unit on a bed, sofa, rug, or

other similar surface.

• Never place the unit in a confined space, such as a bookcase, or built-in

cabinet, unless proper ventilation is provided.

SERVICE

Damage Requiring Service – Unplug the unit from the wall outlet and refer

servicing to qualified service personnel under the following conditions:

•When the power cord or plug is damaged or frayed.

• If liquid has been spilled or objects have fallen into the unit.

•If the unit has been exposed to rain or water.

•If the unit has been subject to excessive shock by being dropped, or the cabinet

has been damaged.

•If the unit does not operate normally when following the operating instructions.

Adjust only those controls that are specified in the operating instructions.

Improper adjustment of other controls may result in damage and will often

require extensive work by a qualified technician to restore the unit to normal

operation.

•When the unit exhibits a distinct change in performance - this indicates a need

for service.

Servicing – Do not attempt to service the unit yourself as opening or removing

covers may expose you to dangerous voltage or other hazards.

Refer to all servicing to qualified service personnel.

Table of Contents 7

Table of Contents

Part 1.

Introduction

How To Use This Guide ..................................................................... 8

About AIT Drives ............................................................................... 9

Features .................................................................................................... 9

Compatible Data Cartridges .................................................................. 12

System Components .............................................................................. 13

Part Names and Functions ............................................................. 14

Front Panel ............................................................................................. 14

Rear Panel .............................................................................................. 15

Part 2.

Preparation

Supplied Items................................................................................. 16

Interconnections ............................................................................. 16

SCSI ID Setting ................................................................................ 17

Option Switches (DIP Switch) ........................................................ 17

Part 3.

Operation

How To Use the AIT Drive ............................................................... 22

Cartridge Removal ................................................................................. 23

Attaching the Dust Cover ............................................................... 24

WORM Function .............................................................................. 26

Part 4.

Care and

Maintenance

Taking Care of the Drive ................................................................. 28

Safety Considerations ............................................................................ 28

Avoiding Damage .................................................................................. 28

Taking Care of Cartridges .............................................................. 30

Use Precautions ..................................................................................... 30

Storage Precautions ............................................................................... 30

Cleaning ........................................................................................... 31

How To Clean ........................................................................................ 31

Appendix Specifications (SDX-D1100V) ......................................................... 32

Specifications (SDX-D900V) ........................................................... 33

Specifications (SDX-D800V) ........................................................... 34

Specifications (SDX-D700V) ........................................................... 35

Specifications (SDX-D500V) ........................................................... 36

Specifications (SDX-D400V) ........................................................... 37

8How to Use this Guide

How To Use This Guide

This Guide describes the SDX-D1100V/SDX-D900V/SDX-D800V/

SDX-D700V/SDX-D500V/SDX-D400V drive, and how to take care of it.

Please read it carefully before using the unit, and keep it handy for future

reference.

The Guide consists of four parts, plus the specifications. Refer to the parts

that relate to your use of the drive.

Part 1 describes the features of the drive, its system components, and the

name and function of each part.

Part 2 describes the necessary connections between the drive and the host

computer. If other SCSI devices are being used, you may need to change the

SCSI ID setting. Read this part if you are installing the drive.

Part 3 describes how to use the drive, including how to turn it on, and how

to insert and remove cartridges. Read this part if you are going to operate the

drive.

Part 4 describes how to take care of the drive and cartridges, and how to

clean the drive. Read this part before using the drive.

Appendix provides the major specifications of the SDX-D1100V/

SDX-D900V/SDX-D800V/SDX-D700V/SDX-D500V/SDX-D400V drive.

Part 1. Introduction 9

Part 1. Introduction

About AIT Drives

The SDX-D1100V AIT-5 Tape Drives is an external AIT drive unit that uses

data cartridges conforming to the AIT-5 format.

The SDX-D900V AIT-4 Tape Drive is an external AIT drive unit that uses

data cartridges conforming to the AIT-4 format.

The SDX-D800V AIT-3 Ex Tape Drives is an external AIT drive unit that

uses data cartridges conforming to the AIT-3 Ex format.

The SDX-D700V AIT-3 Tape Drive is an external AIT drive unit that uses

data cartridges conforming to the AIT-3 format.

The SDX-D500V AIT-2 Tape Drive is an external AIT drive unit that uses

data cartridges conforming to the AIT-2 format.

The SDX-D400V AIT-1 Tape Drive is an external AIT drive unit that uses

data cartridges conforming to the AIT-1 format.

The SDX-D1100V drive supports the AIT-5, AIT-4, AIT-3 Ex, and AIT-3

formats.

The SDX-D900V drive supports the AIT-4 and AIT-3 Ex format.

The SDX-D800V drive supports the AIT-3 Ex, AIT-3, AIT-2 Turbo, AIT-2

(Read only), AIT-1 Turbo (Read only), AIT-1 (Read only), and AIT-E Turbo

(Read only) formats.

The SDX-D700V drive supports the AIT-3, AIT-2, and AIT-1 formats.

The SDX-D500V drive supports the AIT-2 and AIT-1 formats.

The SDX-D400V drive supports only the AIT-1 format.

Features

The SDX-D1100V drive has the following features:

•Supports reading and writing to data cartridges conforming to the AIT-5,

AIT-4, AIT-3 Ex, and AIT-3 formats.

•The second-level error correction code guarantees high data reliability

writing to data cartridges conforming to the AIT-5, AIT-4, and AIT-3 Ex

formats.

•The third-level error correction code guarantees high data reliability writing

to data cartridges conforming to the AIT-3 format.

•Data compression provides 1,040 gigabytes of storage on SDX5-400C data

cartridges.*

The native capacity is 400 gigabytes of storage on SDX5-400C data

cartridges.

•Stored data are automatically checked for compression.

•Ultra 160 SCSI interface is fully supported for host computer access.

•Fragment rewrite function (AIT-5, AIT-4, AIT-3 Ex)

•Frame rewrite function (AIT-3)

*This is assuming 2.6:1 compression ratio.

The degree of data compression attained while recording data varies according to system

environment and data type.

10 Part 1. Introduction

The SDX-D900V drive has the following features:

•Supports reading and writing to data cartridges conforming to the AIT-4

and AIT-3 Ex formats.

•The second-level error correction code guarantees high data reliability

writing to data cartridges conforming to the AIT-4 and AIT-3 Ex formats.

•Data compression provides 520 gigabytes of storage on SDX4-200C data

cartridges.*

The native capacity is 200 gigabytes of storage on SDX4-200C data

cartridges.

•Stored data are automatically checked for compression.

•Ultra 160 SCSI interface is fully supported for host computer access.

•Fragment rewrite function

The SDX-D800V drive has the following features:

•Supports reading and writing to data cartridges conforming to the AIT-3 Ex,

AIT-3, and AIT-2 Turbo formats.

•Supports reading from data cartridges conforming to the AIT-2, AIT-1 Turbo,

AIT-1, and AIT-E Turbo formats.

•The second-level error correction code guarantees high data reliability

writing to data cartridges conforming to the AIT-3 Ex format.

•The third-level error correction code guarantees high data reliability writing

to data cartridges conforming to the AIT-3 format.

•Data compression provides 390 gigabytes of storage on SDX3X-150C data

cartridges.*

The native capacity is 150 gigabytes of storage on SDX3X-150C data

cartridges.

•Stored data are automatically checked for compression.

•Ultra 160 SCSI interface is fully supported for host computer access.

•Fragment rewrite function (AIT-3 Ex)

•Frame rewrite function (AIT-3)

The SDX-D700V drive has the following features:

•Supports reading and writing to data cartridges conforming to the AIT-3,

AIT-2, and AIT-1 formats.

•The third-level error correction code guarantees high data reliability.

•Data compression provides 260 gigabytes of storage on SDX3-100C data

cartridges.*

The native capacity is 100 gigabytes of storage on SDX3-100C data

cartridges.

•Stored data are automatically checked for compression.

•Ultra 160 SCSI interface is fully supported for host computer access.

•Frame rewrite function

*This is assuming 2.6:1 compression ratio.

The degree of data compression attained while recording data varies according to system

environment and data type.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sony Stockage

Sony

Sony SF16UX Manuel utilisateur

Sony

Sony PWS-4400 Manuel utilisateur

Sony

Sony SDX-800V Series Instructions d'installation

Sony

Sony StorStation LIB-D81 Manuel de l'opérateur

Sony

Sony DDS-4 Manuel utilisateur

Sony

Sony ERA-MS008 Manuel utilisateur

Sony

Sony HD-B1 Manuel utilisateur

Sony

Sony VGN-CS320J Manuel utilisateur

Sony

Sony SCPH-20401 Manuel utilisateur

Sony

Sony MSAC-US40 - MemoryStick Flash Memory Card USB 2.0... Manuel utilisateur

Sony

Sony SLW-MG2 Manuel utilisateur

Sony

Sony USM1GE Manuel utilisateur

Sony

Sony USM16 Manuel utilisateur

Sony

Sony VAIO VGP-UHDP04 Manuel utilisateur

Sony

Sony HD-EG5U Manuel utilisateur

Sony

Sony IJ1001SNBT Manuel utilisateur

Sony

Sony HD-EG5 Manuel utilisateur

Sony

Sony MicroVault USM1GJ Manuel utilisateur

Sony

Sony ERA-MS008 Manuel utilisateur

Sony

Sony MicroVault USM1GH Manuel utilisateur

Sony

Sony SR Series Manuel utilisateur

Sony

Sony SDX-D550V Manuel

Sony

Sony VGN-FJ170 Mode d’emploi

Sony

Sony MICROVAULT USM16SA2 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur