SOMFY Telis 6 Chronis RTS Guide d'installation

Launching Kit Telis 16 RTS 06/2010 1

Product knowledge & General Programming Overview

Product description

Design

Telis 6 Chronis RTS design is clear and functional, providing a high-quality

image with exceptional ease of use.

The new Telis 6 Chronis RTS is available in the current RTS finishes: Pure

and Silver: two finishes to suit all décors.

Other design elements:

-A large screen for improved visibility

-Ergonomically-designed buttons

-A discreet wall support

Telis 6 Chronis RTS

Pure

A subtle tone that

blends seamlessly into

all interiors

Silver

For modern interiors

bursting with technology

Telis 6 Chronis RTS

Remote control description

Wall support

Signal indicator

Arrow

Navigation

keys

Selection / Confirmation

button

Up/Stop-My/Down

buttons

Large LCD screen

display

Telis 6 Chronis RTS

General Programming Overview

Programming steps

When the batteries are first installed, “Remote control Programming” mode

is activated : “SET” and “YEAR” appear on the screen.

The programming process is always the same. At each step, the parameter

to be set flashes:

-Press the arrow buttons to change the parameter

-To save the parameter and move to the next parameter,

briefly press the selection button .

You will find more details on general mode programming in the instruction

guide or in the training module

The parameters appear in the following order:

1. YEAR

2. MONTH

3. DAY

4. (and 5) TIME (current time in hours and minutes)

6. AREA (location of residence)

This parameter is linked to the automatic time change function. If your

location place is Europe, choose: EU. If your location place is US,

choose US. If your location place is neither Europe nor US, choose:

OFF: the automatic time change function to adjust for Daylight savings

will be not activated.

Launching Kit Telis 16 RTS 06/2010 4

Telis 6 Chronis RTS

7. (and 8) JUNE (twilight time in midsummer, in June, in hours and

minutes)

9. (and 10) DEC (twilight time in midwinter, in December, in hours and

minutes)

11. Whether or not there are sun sensors on site: select SUN (one or more

sun sensors) or NO SUN (no sun sensors)

Choose “SUN” if motors or receivers are linked to one or more RTS sun

sensors (Outdoor Sunis WireFree RTS or Soliris RTS). In the time

range setting, you can choose to program current orders (Up/My/Down)

or activate (SUN ON) or deactivate (SUN OFF) the RTS sun sensor.

If the house does not have any RTS sun sensors, choose: “NO SUN”:

you will not have the option to program a sun order in your

programming.

NOTE: this is not a function (you will not send any orders by choosing

“SUN” or “NO SUN”, it is an programming parameter setting only. It is

the same as manually changing it via a Telis Soliris Transmitter).

12. Briefly press the selection button to confirm the last parameter:

“Remote control programming” mode is deactivated, and the Telis 6

Chronis returns to automatic mode.

Launching Kit Telis 16 RTS 06/2010 5

Telis 6 Chronis RTS

-“Tilt” mode (function specially for installers)

Reminder: Modes for blinds with adjustable slats

-“EU” mode: European-style ergonomics: short presses on “up” or

“down” buttons to orient the slats; long press on “up” or “down” buttons

to raise or lower them.

-“US” mode: US-style ergonomics: long presses on “up” or “down”

buttons to orient the slates; short presses on “up” or “down” buttons to

raise or lower them.

Benefits of the function

If the end product has adjustable slats (interior or exterior Venetian blinds,

roller shutters with adjustable slats), slat orientation mode can be

configured in “EU” or “US” mode on each channel.

By configuring each channel in “US” mode if the motors are in “US” mode,

or in “EU” mode if the motors are in “EU” mode, when end products with

adjustable slats receive an automatic up order, they will go up.

Setting:

-Make sure that the Telis 6 Chronis is in manual mode.

-Select the channel you want to configure using the arrow button

-Press and hold the selection button until “SET” and “MODE” appear

on the screen (7 sec): “US” or “EU” flashes. To change the mode, press

the arrow buttons and save the parameter by pressing briefly on

the selection button .

NOTE:

-The Telis 6 Chronis RTS default setting set in US mode

Telis 6 Chronis RTS

Manual setting mode

Programming steps –Overview

1. When you are in manual programming mode: first you need to select

the channel you want to customise using the arrow buttons

2. Enter in the manual setting mode by pressing the selection button

until “SET” appears on the screen.

3. Select the location of the character to be edited using the arrow

buttons : “the item to be edited is flashing”

4. Briefly press the selection button to edit the character in this location

5. The character flashes: to select another character, press the arrow

buttons. For each item you can scroll through a letter (AZ) or a

number (09).

6. Briefly press the selection button to save the character displayed and

move to the next character.

7. Repeat steps 3 to 6 for each characters in the group’s name.

8. Press and hold the selection button until “SET” is no longer

displayed on the screen: your setting is validated and the manual

setting mode is deactivated: Telis 6 Chronis RTS returns to user

manual mode.

Launching Kit Telis 16 RTS 06/2010 7

Telis 6 Chronis RTS

Automatic setting mode

Programming steps –Overview

The programming process is always the same. At each step, the parameter

to be set flashes:

-Press the arrow buttons to change the parameter

-To save the parameter and move to the next parameter, briefly

press the selection button .

You will find more details on general mode programming in the instruction

guide or in the training module

1. When you are in automatic programming mode: First you need to

select the day you want edit. Use the arrow buttons to choose

the day. Confirm with the selection button.

2. “EDIT” appears: confirm that you want edit the day by pressing briefly

on the selection button

3. With arrow keys, choose the time frame you want program:

the time frame blinks. Confirm the time frame with the selection button.

4. You can choose between programming a time or using the twilight

time. Use the arrow buttons and confirm your choice with the

selection button.

Launching Kit Telis 16 RTS 06/2010 8

Telis 6 Chronis RTS

5. If you choose to program a time, first adjust the hour with the arrow

buttons. Confirm with the selection button. Now, adjust the

minutes and confirm.

6. Choose the channels/groups to be activated for this scheduled

time. Select the group to be edited using the arrow buttons

than briefly press the selection button to activate or deactivate the

group. To confirm your group selection, go to group #6 and press briefly

on the right arrow button: all 6 channels will flash. To confirm, press

briefly on the confirmation button.

7. Now, choose the command you want send with the navigation keys.

Confirm it by pressing briefly on the selection button.

8. To continue the settings, repeat the setting process from the step “1”. A

long press on the confirmation button will allow you to leave auto

setting mode.

Launching Kit Telis 16 RTS 06/2010 9

Telis 6 Chronis RTS

Automatic setting mode : additional functions

Programming steps

You will find more details on the additional function setting in the instruction guide or in the

training module

-Twilight function

When you set a time range, you can choose between a programmed time

or the time of twilight. The twilight is indicated by a moon icon. (see

general setting mode part). Choose the twilight by using the arrow

buttons.

-Vacation Mode - Security function

At any time, users can easily activate the presence simulation function.

From the user mode of the auto mode: press the 2 arrow buttons ⊳

⊳⊳

⊳ 





simultaneously in order to activate the presence simulation function. The

presence simulation function will stay activated until the end users will push

briefly on any buttons.

-Automatic time change function for the daylight saving time

If your location place is US or Europe, you can benefit from this function

(see general setting mode part).

Launching Kit Telis 16 RTS 06/2010 10

Telis 6 Chronis RTS

-Copy/Paste function

To copy a day to another day, you need to enter auto setting mode

(long press on the selection button) Now, select the day you want copy.

Press the 2 arrow buttons simultaneously ⊳

⊳⊳

⊳ 



: “COPY” appears:

the day is copied. Now, select the day to which the program is to be copied.

To paste the copied program, press both arrow buttons simultaneously

⊳

⊳⊳

⊳ 



: “PASTE” appears. The program that was copied is pasted into this

other day.

-Sun function

The sun function can only be activated in automatic mode, by programming

a “SUN ON” automatic order into a time range. To make best use of the

sun function, we recommend programming a “SUN ON” every

morning and a “SUN OFF” every evening.

In automatic mode:

-If a “SUN ON” automatic order is programmed, this means that, at the

indicated time, the motors or receivers linked to one or more RTS sun

sensors will follow the orders generated by these sensors. The end

products concerned will react according to the amount of sunlight, until

the next “SUN OFF” automatic order.

-If a “SUN OFF” automatic order is programmed, this means that, at

indicated time, these motors or receivers will cease to follow orders

from the RTS sun sensors.

The sun function is only active in automatic mode. As soon as the

Telis 6 Chronis RTS switches to manual mode, this function is

automatically deactivated. It can only be activated at the next

programmed “SUN ON” automatic order.

Autres manuels pour Telis 6 Chronis RTS

Table des matières

Autres manuels SOMFY Télécommande

SOMFY

SOMFY Telis 1 io Manuel utilisateur

SOMFY

SOMFY Situo 1 Soliris RTS II Manuel utilisateur

SOMFY

SOMFY Sonesse 40 Manuel utilisateur

SOMFY

SOMFY Telis Composio io Manuel utilisateur

SOMFY

SOMFY SITUO 5 io/RTS PURE Guide d'installation

SOMFY

SOMFY Telis 16 RTS Manuel utilisateur

SOMFY

SOMFY Situo 5 Variation RTS II Manuel utilisateur

SOMFY

SOMFY SITUO 5 io/RTS PURE Manuel utilisateur

SOMFY

SOMFY IRS 300 Manuel utilisateur

SOMFY

SOMFY Situo 1 RTS Instructions d'utilisation et d'entretien

SOMFY

SOMFY KeyGo io Manuel utilisateur

SOMFY

SOMFY Telis Composio RTS Manuel utilisateur

SOMFY

SOMFY SITUO 5 io/RTS PURE Manuel utilisateur

SOMFY

SOMFY inteo CENTRALIS RTS Manuel utilisateur

SOMFY

SOMFY INTEO TELIS 1 RTS Manuel utilisateur

SOMFY

SOMFY Smoove Origin RTS US Manuel utilisateur

SOMFY

SOMFY Telis Soliris 4 RTS Patio Manuel utilisateur

SOMFY

SOMFY inis RT Manuel utilisateur

SOMFY

SOMFY 1875157 Manuel utilisateur

SOMFY

SOMFY SITUO RTS Manuel utilisateur

SOMFY

SOMFY Nina Timer io Manuel utilisateur

SOMFY

SOMFY FREEROLL RTS Manuel utilisateur

SOMFY

SOMFY KEYTIS 2 Manuel utilisateur

SOMFY

SOMFY Nina io Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation