SOMFY SITUO RTS Manuel utilisateur

www.somfy.com

Operating and installation guide

Situo RTS

Ref. 5054470A

1. Brief introduction to the Situo RTS control point 3

1.1 What is the Situo RTS for? 3

1.2 A few denitions 3

2. Safety - Important information 4

2.1 Installation and commissioning 4

2.2 Operating 4

2.3 Environment 4

3. Content of the kit and tools required 5

3.1 List of parts 5

3.2 Tools required 5

4. The Situo RTS in detail 5

4.1 Components 5

4.2 Technical data 6

5. Adding a new Situo RTS 6

5.1 Identifying the original control point 6

5.2 One-touch point 7

5.3 Point with up/STOP/down buttons 13

5.4 Timer 16

5.5 Telis 1 RTS/Telis Soliris RTS remote controls 18

5.6 Telis 4 RTS/Telis 4 Soliris RTS remote controls 21

6. Replacing a lost or broken control point 23

6.1 Sole control point lost or broken 23

6.2 One lost or broken control point amongst others 23

7. Mounting the bracket 24

8. Everyday use of the Situo RTS 25

8.1 Up and down buttons 25

8.2 My button 25

8.3 Replacing the battery 25

8.4 Maintenance 26

9. Problems with the Situo RTS? 27

Contents

Situo RTS

Somfy’s expertise delivers satisfaction guaranteed.

Thank you for choosing a Somfy Situo RTS.

Before installing and using the Situo RTS, please read this guide

carefully.

Somfy solutions animate your windows and entrances to bring your

whole house alive. Somfy solutions are designed so that everyone can

enjoy the benets of the products in their home, based on their specic

requirements.

In this guide, the term ‘product’ can include your awning, blind, curtain,

garage door, gate, projection screen, roller shutter.

Well thought-out and easy to use, Somfy solutions are one of life’s little

daily pleasures, making home life more enjoyable.

1. Brief introduction to the Situo RTS control

point

1.1 What is the Situo RTS for?

The Situo RTS is a wall-mounted, wireless, radio control point. It is

compatible only with products tted with Radio Technology Somfy (RTS)

(e.g. roller shutter motors, blinds motors, etc).

The Situo RTS is used as an individual control to control a single product

(e.g. one roller blind) at a time.

1.2 A few denitions

Installation

All of the Radio Technology Somfy products a house is equipped with.

Favourite position:

The favourite position is your ideal position for your product in certain

common situations, for example, your awning partially extended when

you are dining beneath it in summer but don't want to deprive your

houseplants of sunlight, your awnings or blinds partially closed to shield

your computer from the afternoon sunlight.

Situo RTS

2. Safety - Important information

2.1 Installation and commissioning

Before installing and using the Situo RTS, please carefully read these

instructions, which describe how to install, commission and operate the

Situo RTS.

Never begin installing without rst checking the compatibility of the Situo

RTS with the associated equipment and accessories.

Any incorrect use will invalidate the warranty and Somfy's liability.

2.2 Operating

Somfy recommends that at least one control point is located close to -

the product or group of products.

Do not allow children to play with the xed control points. Keep remote

controls out of the reach of children.

Monitor the product (especially roller shutter/awning/garage door/gate)

while it is moving, especially during commissioning of the Situo RTS

and keep people at a distance until the product is completely closed.

Make sure the power supply to the roller shutter/awning is turned off

before any maintenance operation in the vicinity of the product (for

example, when cleaning windows near the blind).

Avoid moving the product if ice has formed in it, unless the motor is

tted with anti-freeze protection.

Do not leave the product near a window in full sun: the Situo RTS

cannot withstand temperatures above 60°C.

Do not immerse or soak the Situo RTS in any liquid.

Only use maintenance products recommended by Somfy (see para--

graph 8.4).

Frequently check the product (e.g. blind) to detect any defects in

balance or any signs of wear. Do not use the product if a repair or

adjustment is required.

2.3 Environment

Damaged electrical or electronic products, such as used batteries,

should not be disposed of with household waste. Please take them to

a collection point or an approved centre to ensure they are recycled

correctly.

Situo RTS

3. Content of the kit and tools required

3.1 List of parts

Before starting installation and commissioning of the Situo RTS, check -

that all parts listed in the table below are present in the correct quantity

(Q):

No. Components Q.

1Front cover of the Situo RTS 1

2Wall support 1

3Plug 2

4Screw 2

3.2 Tools required

Insulated athead electricians•

screwdriver

3 mm drill bit and drill•

Pencil•

4. The Situo RTS in detail

4.1 Components

A. Up button

B. STOP/my button

C. Down button

D. Indicator light

E. PROG button

F. Wall support

Situo RTS

4.2 Technical data

Dimensions in mm (H x L x W): 120 x 38.5 x 19.5.

Operating temperature: 0°C to + 60°C.

Index protection rating: Inside use, in a dry room - IP 30.

Frequency: 433.42 MHz.

Range: 20m through two concrete walls; 200m in open space.

Battery: 3 V, type - CR 2430.

5. Adding a new Situo RTS

5.1 Identifying the original control point

5.1.1 Installation recommendations

To add a Situo RTS, use the control point linked to the product -

which controls only this product: pressing the up or down button only

causes movement of the product to which the new Situo RTS must be

connected.

Caution! If there is no longer a control point linked to the product (all the

control points are broken or have been lost), contact the Somfy assis-

tance service.

On some products, inputs in programming mode and adding or dele-

ting a control point are signalled by a series of “beeps” emitted by the

motor. On other products this is signalled by a brief movement of the

product.

Caution: if the product does not emit a beep or make a brief movement,

please contact the Somfy assistance service.

Place the product into the midway position before installing the new

Situo RTS so that the movements can easily be seen.

Situo RTS

5.1.2 Original control points

F-ind the original control point in the list

below and refer to the relevant para-

graph to add the new Situo RTS:

1) Control point xed to the wall with

a single button, called a One-touch

point, see paragraph 5.2;

2) Control point xed to the wall with

up/STOP/down buttons called a Point

with up/STOP/down buttons, see

paragraph 5.3;

3) Programmer type control point,

called a Timer, see paragraph 5.4;

4a) Telis 1 RTS remote control, see

paragraph 5.6

4b) Telis Soliris RTS remote control,

see paragraph 5.6;

5a) Telis 4 RTS remote controls, see

paragraph 5.7;

5b) Telis 4 Soliris RTS remote controls,

see paragraph 5.7.

5.2 One-touch point

Move close to the product to install the

new Situo RTS.

5.2.1 Identifying the model

Check that the original control point -

has an elongated button.

Bring the product to the midway

position.

Remove the front cover from the one-

touch point:

One touch point with a white and grey front

cover

Gently remove the front cover with a -

at, pointed tool (such as a athead

screwdriver) where the white

section and the grey section join.

Lever it and lift the cover, without

using force, to detach the mounting

lugs from the front cover.

1 2 3

4a 4b 5a 5b

Situo RTS

One-touch point with a white front cover:

Lever it with a at, pointed tool (such -

as a athead screwdriver), without

using force, around the upper section

of the front cover to detach it from its

mounting.

-Turn the front cover over to nd the

model:

If there is a metal plate inscribed

PROG next to the battery: model A.

If there is no metal plate inscribed

PROG next to the battery: model B.

5.2.2 Adding the Situo RTS

Model A:

-Make a contact between the PROG

metal plate (a) on the electrical circuit

and the battery bracket using a athead

screwdriver until the product moves

briey (or emit a series of 3 beeps):

the programming function of the control

point is activated for approximately

2 minutes.

-Take the front cover of the new Situo

RTS and turn it over to access the

PROG button (E).

Briey press the PROG button (E) on

the new Situo RTS: the product will

move briey again (or emit a series of

8 beeps) to indicate that the new Situo

RTS has been programmed.

A B

Situo RTS

-Press the down button on the new

Situo RTS:

If the product is lowered, the Situo

RTS is operational.

If the product does not move, contact

the Somfy assistance service.

If the original control point must be dele-

ted, go to paragraph 5.2.3 "Deleting an

original control point".

If the original control point is to be kept,

ret the front cover:

One-touch point with a white and grey front

cover:

Insert the mounting lugs into their -

notches on one side of the front

cover.

Press on the other side until it clicks,

to t the front cover in its bracket.

Refer to the “Mounting the bracket”

section to nish installing the Situo

RTS.

One-touch point with a white front cover:

Ret the front cover on its bracket.-

Refer to the “Mounting the bracket” -

section to nish installing the Situo

RTS.

Model B:

-Remove the battery from the original

control point using a plastic object.

Press on the centre section of the one-

touch point button.

Ret the battery in the base of its brac-

ket (with text legible).

Situo RTS

Press the button again until the product -

moves briey (or emits a series of 3

beeps): the programming function

on the control point is activated for

approximately 2 minutes.

Take the front cover of the new Situo

RTS and turn it over to access the

PROG button (E).

-Briey press the PROG button (E) on

the new Situo RTS: the product will

again move briey (or emit a series of

8 beeps) to indicate that the new Situo

RTS has been programmed.

-Press the down button on the new

Situo RTS:

If the product is lowered, the Situo

RTS is operational.

If the product does not move, contact

the Somfy assistance service.

If the original control point must be dele-

ted, go to paragraph 5.2.3 "Deleting an

original control point".

If the original control point is to be kept,

ret the front cover:

One-touch point with a white and grey front

cover:

Insert the mounting lugs into their -

notches on one side of the front

cover.

Press on the other side until it clicks,

to t the front cover in its bracket.

Refer to the “Mounting the bracket”

section to nish installing the Situo

RTS.

One-touch point with a white front cover:

Ret the front cover on its bracket-

Refer to the “Mounting the bracket” -

section to nish installing the Situo

RTS.

Autres manuels pour SITUO RTS

Table des matières

Autres manuels SOMFY Télécommande

SOMFY

SOMFY Impresario Chronis RTS Manuel utilisateur

SOMFY

SOMFY Situo 1 Soliris RTS II Manuel utilisateur

SOMFY

SOMFY KeyGo io Manuel utilisateur

SOMFY

SOMFY Telis RTS Manuel utilisateur

SOMFY

SOMFY Oximo RTS Manuel utilisateur

SOMFY

SOMFY Telis 4 Soliris RTS Manuel utilisateur

SOMFY

SOMFY nina Manuel utilisateur

SOMFY

SOMFY Situo 5 io Manuel utilisateur

SOMFY

SOMFY Keytis NS2RTS Manuel du propriétaire

SOMFY

SOMFY KEYTIS 4 Manuel utilisateur

SOMFY

SOMFY IRS 300 Manuel utilisateur

SOMFY

SOMFY SITUO 5 io/RTS PURE Manuel utilisateur

SOMFY

SOMFY Telis 1 Lounge Manuel du propriétaire

SOMFY

SOMFY Telis 4 Soliris RTS Manuel utilisateur

SOMFY

SOMFY Harmoic Design System II Manuel utilisateur

SOMFY

SOMFY Telis Composio RTS Manuel utilisateur

SOMFY

SOMFY Telis 1 RTS Pure Manuel utilisateur

SOMFY

SOMFY Telis 6 Chronis RTS Manuel utilisateur

SOMFY

SOMFY Nina io Manuel utilisateur

SOMFY

SOMFY HOME MOTION Chronis io Manuel utilisateur

SOMFY

SOMFY Situo 1 RTS Manuel utilisateur

SOMFY

SOMFY Telis 1 Soliris RTS Pure Manuel utilisateur

SOMFY

SOMFY 5014984 Manuel utilisateur

SOMFY

SOMFY Telis 1 Lounge Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation