SOMFY Telis Soliris RTS Manuel utilisateur

Operating and installation guide

Telis Soliris RTS

www.somfy.com

Ref.5054468A

1. Brief introduction to the Telis Soliris RTS remote control 3

1.1 What is the Telis Soliris RTS for? 3

1.2 A few denitions 3

2. Safety - Important information 4

2.1 Installation and commissioning 4

2.2 Operating 4

2.3 Environment 4

3. Content of the kit and tools required 5

3.1 List of parts 5

3.2 Tools required 5

4. The Telis Soliris RTS in detail 6

4.1 Components 6

4.2 Technical data 6

5. Adding a new Telis Soliris RTS 7

5.1 Identifying the original control point 7

5.2 One-touch point 8

5.3 Point with Up/STOP/Down buttons 13

5.4 Timer 16

5.5 Situo control point 18

5.6 Telis 1 RTS/Telis Soliris RTS remote controls 20

5.7 Telis 4 RTS/Telis 4 Soliris RTS remote controls 23

6. Replacing a lost or broken control point 25

6.1 Sole control point lost or broken 25

6.2 One lost or broken control point amongst others 25

7. Mounting the bracket 25

8. Everyday use of the Telis Soliris RTS 26

8.1 Sun function 26

8.2 Up and Down buttons 27

8.3 My button 27

8.4 Replacing the battery 28

8.5 Maintenance 28

9. Problems with the Telis Soliris RTS? 28

Contents

Telis Soliris RTS

Somfy’s expertise delivers satisfaction guaranteed.

Thank you for choosing a Somfy Telis Soliris RTS .

Before installing and using the Telis Soliris RTS, please read this guide

carefully.

Somfy solutions animate your windows and entrances to bring your

whole house alive. Somfy solutions are designed so that everyone can

enjoy the benets of the products in their home, based on their specic

requirements.

In this guide, the term ‘product’ can include your awning, blind, curtain,

garage door, gate, projection screen, roller shutter.

Well thought-out and easy to use, Somfy solutions are one of life’s little

daily pleasures, making home life more enjoyable.

1. Brief introduction to the Telis Soliris RTS

remote control

This guide describes the installation steps required to make the best use

of the Telis Soliris RTS. Advanced installation functions are available on

our website (address on the back cover of this guide).

1.1 What is the Telis Soliris RTS for?

The Telis Soliris RTS is a wireless radio remote control compatible only

with products tted with Radio Technology Somfy (RTS): roller shutter

motors, awning motors, etc.

The Telis Soliris RTS is used:

As an individual control to control a single product (e.g. roller blind) •

at a time;

As a group control to command several products at the same time •

(e.g. several roller blinds) (advanced installation function).

1.2 A few denitions

Installation

All of the Radio Technology Somfy products a house is equipped with.

Favourite position:

The favourite position is your ideal position for your product in certain

common situations, for example, your curtains or blinds partially closed

Telis Soliris RTS

to shield the TV from afternoon sunlight; your awning partially extended

when you are dining beneath it in summer but don’t want to deprive your

houseplants of sunlight.

2. Safety - Important information

2.1 Installation and commissioning

Before installing and using the Telis Soliris RTS, please read these

instructions carefully, which describe how to install, commission and

operate the Telis Soliris RTS.

Never begin installing without rst checking the compatibility of the Telis

Soliris RTS with the associated equipment and accessories.

Any incorrect use will invalidate the warranty and Somfy's liability.

2.2 Operating

Somfy recommends that at least one control point is located close to -

the product or group of products.

Do not allow children to play with the xed control points. Keep remote

controls out of the reach of children.

Monitor the product (especially the roller shutter/awning) while it is

moving, especially during commissioning of the Telis Soliris RTS, and

keep people at a distance until the product is completely closed.

Make sure the power supply to the product is turned off before any

maintenance operation in the vicinity of the product (for example, when

cleaning windows near your blind).

Avoid moving the product if ice has formed in it, unless the motor is

tted with anti-freeze protection.

Do not leave the Telis Soliris RTS behind a window in full sunlight: as

it cannot withstand temperatures greater than 60°C.

Do not leave the Telis Soliris RTS in a car in winter.

Do not immerse or soak the Telis Soliris RTS in any liquid.-

Only use maintenance products recommended by Somfy.-

Frequently check the product (e.g. awning) to detect any defects in -

balance or any signs of wear. Do not use the product if a repair or

adjustment is required.

2.3 Environment

Damaged electrical or electronic products, such as used batteries,

should not be disposed of with household waste. Please take them to

Telis Soliris RTS

a collection point or an approved centre to ensure they are recycled

correctly.

3. Content of the kit and tools required

3.1 List of parts

-Before starting installation and commissioning of the Telis Soliris RTS,

check that all parts listed in the table below are present in the correct

quantity (Q):

No. Components Q.

1Telis Soliris RTS remote control 1

2Mounting pin 1

3Bracket 1

4Plug 1

5Screw 1

3.2 Tools required

• Phillips screwdriver

Insulated athead electricians •

screwdriver

Drill and drill bit•

Pencil•

Telis Soliris RTS

4. The Telis Soliris RTS in detail

4.1 Components

A. Up button

B. STOP/my button

C. Down button

D. Wind and Sun indicator light

E. Wind indicator light

F. Wind or Wind and Sun Selection Button

G. PROG button

4.2 Technical data

4.2.1 Pure, Lounge, Silver Models

Dimensions in mm (Height x Width x Depth):

Pure model: 134 x 41 x 21 mm

Lounge, Silver models: 145 x 49 x 22 mm

Operating temperature: 0°C to + 60°C

Protection rating: Inside use, in a dry room IP 30

Frequency: 433.42 MHz.

Range: 20m through two concrete walls; 200m in open space

Battery: 3 V type CR 2430

4.2.2 Patio Model

Dimensions in mm (H x w x d): 145 x 49 x 22 mm

Operating temperature: 0 °C to + 60 °C

Protection rating IP 44: Rain-resistant and shockproof

Frequency: 433.42 MHz

Range: 20 m through two concrete walls; 200 m in open space

Battery: 3 V type CR 2430

my somfy.com

Telis Soliris RTS

5. Adding a new Telis Soliris RTS

5.1 Identifying the original control point

5.1.1 Installation recommendations

To add a Telis Soliris RTS, use the control point linked to the product -

which controls only this product: pressing the Down or Up button only

causes movement of the product to which the new Telis Soliris RTS

must be connected.

Caution! If there is no longer a control point linked to the product (all

the control points are broken or have been lost), contact the Somfy

assistance service.

N.B.: This guide only describes the installation procedure for an addi-

tional Telis Soliris RTS of the "individual control" type. Refer to the

instructions for advanced functions available on the Internet (address

on the back cover of this guide) to install a control referred to as "group

control".

On some products, inputs in programming mode and the addition or

deletion of a control point are signalled by a series of beeps emitted

by the motor. On other products, this is signalled by a brief movement

of the product.

Note: If the product does not emit a beep or make a brief movement,

please contact the Somfy assistance service.

Place the product in the midway position before installing the new

Telis Soliris RTS so that the movements can be easily seen.

Check that a Sun sensor is linked to the product.

Telis Soliris RTS

5.1.2 Original control points

-Find the original control point in the list

below and refer to the paragraph given

to add the new Telis Soliris RTS:

1) Control point xed to the wall with

a single button, called a One-touch

point, see paragraph 5.2;

2) Control point xed to the wall with

Up/STOP/Down buttons, called a

Point with Up/STOP/Down buttons,

see paragraph 5.3;

3) Programmer type control point,

called a Timer, see paragraph 5.4;

4) Situo control point xed to the wall,

see paragraph 5.5;

5a) Telis 1 RTS remote control, see

paragraph 5.6;

5b) Telis Soliris RTS remote control,

see paragraph 5.6;

6a) Telis 4 RTS remote control, see

paragraph 5.7;

6b) Telis 4 Soliris RTS remote control,

see paragraph 5.7.

5.2 One-touch point

Move close to the product to install the

new Telis Soliris RTS.

5.2.1 Identifying the model

Check that the original control point -

has an elongated button.

Bring the product to the midway

position.

Remove the front cover from the one-

touch point:

One-touch point with a white and grey front

cover

Gently remove the front cover with a -

at, pointed tool (such as a athead

screwdriver) where the white section

6a 6b

Telis Soliris RTS

and the grey section join.

Lever it, without using force, to

detach the mounting lugs from the

front cover.

One-touch point with a white front cover:

Lever it with a at, pointed tool -

(such as a athead screwdriver),

without using force, around the

upper section of the front cover to

detach it from its mounting.

Turn the front cover over to nd out the

model:

If there is a metal plate inscribed

PROG next to the battery: model A.

If there is no metal plate inscribed

PROG next to the battery: model B.

5.2.2 Adding the Telis Soliris RTS

Model A:

-Make a contact between the PROG

metal plate on the electrical circuit and

the battery bracket using a athead

screwdriver, until the product moves

briey (or there is a series of 3 beeps):

the programming function is activated

for approximately 2 minutes.

Take the new Telis Soliris RTS and turn

it over.

-Press the PROG button (G) on the new

Telis Soliris RTS briey with the tip of

a pencil: the product will make another

brief movement (or emit a series of

8 beeps) to indicate that the new Telis

Soliris RTS is stored.

A B

Telis Soliris RTS

-Press the Down button on the new Telis

Soliris RTS:

If the product is lowered, the Telis

Soliris RTS is operational.

If the product does not move, contact

the Somfy assistance service.

If the original control point must be dele-

ted, go to paragraph 5.2.3 "Deleting an

original control point".

If the original control point is to be kept,

ret the front cover:

One-touch point with a white and grey front

cover:

Insert the mounting lugs into their -

notches on one side of the front

cover.

Press on the other side until it clicks,

to x the front cover in its bracket.

One-touch point with a white front cover:

Ret the front cover on its bracket-

Model B:

-Remove the battery from the original

control point using a plastic object.

Press on the centre section of the one-

touch point button.

Ret the battery in the base of its brac-

ket (with text legible).

Press the button again until the product

moves briey (or there is a series of

3 beeps): the programming function is

activated for approximately 2 minutes.

Take the new Telis Soliris RTS and turn

it over

-Press the PROG button (G) on the new

Telis Soliris RTS briey with the tip of

a pencil: the product will make another

brief movement (or emit a series of

8 beeps) to indicate that the new Telis

Soliris RTS is stored.

Table des matières

Autres manuels SOMFY Télécommande

SOMFY

SOMFY HOME MOTION Chronis io Manuel utilisateur

SOMFY

SOMFY Harmoic Design System II Manuel utilisateur

SOMFY

SOMFY Situo 1 io Manuel utilisateur

SOMFY

SOMFY SITUO 1 VARIATION Manuel utilisateur

SOMFY

SOMFY Telis 6 Chronis RTS Guide d'installation

SOMFY

SOMFY CENTRALIS RECEIVER Manuel utilisateur

SOMFY

SOMFY INTEO TELIS 1 RTS Manuel utilisateur

SOMFY

SOMFY Situo 1 RTS Guide d'installation

SOMFY

SOMFY Telis 1 Chronis RTS Manuel utilisateur

SOMFY

SOMFY Situo 5 Variation RTS II Manuel utilisateur

SOMFY

SOMFY Telis 1 io Manuel utilisateur

SOMFY

SOMFY Smoove Origin RTS US Manuel utilisateur

SOMFY

SOMFY KEYTIS 2 Manuel utilisateur

SOMFY

SOMFY Oximo RTS Manuel utilisateur

SOMFY

SOMFY Telis 1 RTS Pure Manuel utilisateur

SOMFY

SOMFY 1810632 Telis 1 RTS Pure Manuel utilisateur

SOMFY

SOMFY Telis 16 RTS Manuel utilisateur

SOMFY

SOMFY nina Manuel utilisateur

SOMFY

SOMFY Nina Timer io Manuel utilisateur

SOMFY

SOMFY Telis Composio RTS Manuel utilisateur

SOMFY

SOMFY Easy Sun io Manuel utilisateur

SOMFY

SOMFY KEYGO Manuel utilisateur

SOMFY

SOMFY SITUO 5 io/RTS PURE Guide d'installation

SOMFY

SOMFY Situo 1 Soliris RTS II Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation