SnowEx SP-65 Manuel du propriétaire
CUSTOMER COPY
Madison Heights, Michigan 48071
800-725-8377
www.snowexproducts.com
Owner / Operator’s Manual
SP-65
Serial # PA-201033 and higher
This Manual Must Be Read Before Operating The Equipment
© TrynEx International 2013
(REV B) F50753
© TrynEx International 2013 (REV B) F507532
Table of Contents
Have a question or need assistance?
SnowEx Customer Care
1-800-SALTERS
or (248) 586-3500
Monday through Friday 8:00 AM to 4:30 PM EST
Fax: (248) 691-8378
E-mail: customercare@trynexfactory.com
Website: www.snowexproducts.com
General Information ..................................................................................................................................................................................... 3
Introduction ................................................................................................................................................................................................. 4
Safety .......................................................................................................................................................................................................... 5
Operation ..................................................................................................................................................................................................... 6
Assembly Instructions ........................................................................................................................................................................... 7 - 10
Troubleshooting ......................................................................................................................................................................................... 11
Warranty .................................................................................................................................................................................................... 12
Key to Parts ............................................................................................................................................................................................... 13
Hopper Assembly Parts Breakdown
Model # SP-65 ..................................................................................................................................................................... 14 - 15
Axle Assembly Parts Breakdown
Model # SP-65 ..................................................................................................................................................................... 16 - 17
Handle Assembly Parts Breakdown
Model # SP-65 ..................................................................................................................................................................... 18 - 19
Notes .................................................................................................................................................................................................. 20 - 23
© TrynEx International 2013 (REV B) F50753 3
General Information
CONGRATULATIONS!
The SnowEx product you have purchased is an example of snow and ice management product at its nest! Your SnowEx product’s self
contained design is a trademark of all SnowEx products. Here’s why...
SIMPLICITY: Fewer moving parts manufactured of higher quality means minimal maintenance for your SnowEx product.
RELIABILITY: High impact linear low density polyethylene hopper, custom engineered powder coated frame.
VERSATILITY: Multi-use capability allows spreading of a variety of materials.
WARRANTY: Two years parts and labor from date of installation.
The benets you are about to recognize are that of time, money and effort.
We welcome you to the world of SnowEx Performance.
Registration
Record the following information in this manual for quick reference.
Model Number
Serial Number
Date of Purchase
Dealer Where Purchased
When ordering parts, the above information is necessary. This will help to ensure
that you receive the correct parts.
At the right is a diagram of the ID tag. This tag is located on the frame.
Please ll out the warranty card with all the necessary information to validate it. This will
also give us a record so that any safety or service information can be communicated to
you.
PA-201033
© TrynEx International 2013 (REV B) F507534
Introduction
This manual has been designed for your help. It will assist you and instruct you on the proper set-up, installation and use of this product.
Refer to the table of contents for an outline of this manual.
We require that you read and understand the contents of this manual completely (especially all safety information) before attempting any
procedure contained in this manual. Extra copies of Owner / Operator Manuals can be purchased at your SnowEx Dealer.
THIS SIGN SHOULD ALERT YOU:
The Society of Automotive Engineers has adopted this Safety Alert Symbol to pinpoint characteristics that,
if not carefully followed, can create a safety hazard. When you see this symbol in this manual or on the
machine itself, be alert! Your personal safety and the safety of others is involved.
Dened below are the Safety Alert Messages and how they will appear in this manual:
(RED)
Information that, if not carefully followed,
can cause death!
(ORANGE)
Information that, if not carefully followed,
can cause serious personal injury or death!
(YELLOW)
Information that, if not carefully followed,
can cause minor injury or damage to equipment
© TrynEx International 2013 (REV B) F50753 5
Safety
Before attempting any procedure in this book, these safety instructions must be read and understood by all workers who have any part in the
preparation or use of this equipment.
For your safety warning and information decals have been placed on this product to remind the operator of safety precautions . If anything
happens to mark or destroy the decals, please request new ones from SnowEx.
Remember, most accidents are preventable and caused by human error. Exercising of care and precautions
must be observed to prevent the possibility of injury to operator or others!
Never operate equipment when under the inuence of alcohol, drugs, or medications that might alter your
judgment and/or reaction time.
Before working with the spreader, secure all loose tting clothing and unrestrained hair.
Always wear safety glasses with side shields when servicing spreader. Failure to do this could result in serious
injury to the eyes.
Never attempt to lift a unit with material in it.
Never allow children to operate or climb on equipment.
Always check areas to be spread to be sure no hazardous conditions or substances are in the area.
Always inspect unit for defects: broken, worn or bent parts, weakened areas on spreader.
Remember it is the owner’s responsibility to communicate information on safe usage and proper maintenance
of all equipment.
Always make sure personnel are clear of areas of danger when using equipment.
Never weld or grind on equipment without having a re extinguisher available.
Inspect the unit periodically for defects. Parts that are broken, missing or worn out must be replaced
immediately. The unit or any part of it can not be altered without prior written permission from the
manufacturer.
Never use wet materials or materials with foreign debris with any of these spreaders. These units are designed
to handle dry, clean, free owing material.
Never leave material in hopper for long periods of time. Be aware that all salt is hygroscopic and will attract
atmospheric moisture and harden up.
© TrynEx International 2013 (REV B) F507536
SPREADER LOADING
Capacity: 1.5 Cubic Foot Hopper
Do not overload spreader. Weights of material are an average for dry materials.
Never remove spreader from vehicle with material in it as this could cause damage to the frame assembly.
Never leave materials in hopper for long periods of time, salt is hygroscopic and will attract atmospheric
moisture and harden up.
SPREADING TIPS
For a heavier pass:
Walk Slower
Increase Gate Opening
For a lighter pass:
Walk Faster
Restrict Gate Opening
For a wider pass:
Walk Faster
Spread ice melters with the storm to prevent unmanageable levels of ice.
Calculate spread pattern when near vegetation and vehicles
Gate Stop can be used to set how much salt is put down at your normal walking speed.
Material Weight Per Cubic Ft.
Rock Salt 80-90 lbs.
Sand/Salt Mix 95-120 lbs.
Spreader Operation
Model # SP-65
© TrynEx International 2013 (REV B) F50753 7
Assembly Instructions
Model # SP-65
STEP 1
Open Box. Remove the Axle/Spinner Assembly. Slide the Shaft Collars
from the hardware kit onto the axle - one on each side of the Gearbox
STEP 2
Slide the Hopper Frame Assemblies over the Axle – one on each side
of the Gearbox.
STEP 3
Install Drive Wheel. Slide the 2” Cotter Pin through both the wheel and
axle.
One Hole in Axle – Left.
One Hole in Axle – Left.
© TrynEx International 2013 (REV B) F507538
Assembly Instructions
Model # SP-65
STEP 4
Install the other Wheel. Slide the 1.5” Cotter Pin through the Axle,
outside the Wheel.
STEP 6
Install Hopper. Put Bolts with Washers through all four holes in Hopper
and Frame. Thread on the Nuts.
STEP 5
Install Frame Stand. Attach to the Hopper Supports.
STEP 7
Put Agitator Pin through Spinner Shaft inside hopper.
STEP 8
Bolt Cable to both handles. It should be positioned so the cable points
toward the base of the handle and will be to the operator’s left. Hand-
tighten only.
© TrynEx International 2013 (REV B) F50753 9
Assembly Instructions
Model # SP-65
STEP 9
Put bolt through both handles at the base. Hand-Tighten only.
STEP 10
Put Handle Assembly onto frame. Insert Bolts. Hand-Tighten.
STEP 11
Tighten Bolts holding the handle together, then tighten the bolts
holding the handle to the frame.
STEP 12
Put Cable Lever into Off position. Pull Gate as far back as possible.
Attach Cable to Gate.
© TrynEx International 2013 (REV B) F5075310
Assembly Instructions
Model # SP-65
STEP 13
Install Cable Clip to cable bracket.
COMPLETE.
Autres manuels pour SP-65
1
Table des matières
Autres manuels SnowEx Épandeur
SnowEx
SnowEx SP-325 Mode d'emploi
SnowEx
SnowEx SR-210 Mode d'emploi
SnowEx
SnowEx V-Maxx G2 VX-6010 Manuel utilisateur
SnowEx
SnowEx SP-1675 Manuel utilisateur
SnowEx
SnowEx SP-85 Mode d'emploi
SnowEx
SnowEx SP-2200 Manuel utilisateur
SnowEx
SnowEx Super Maxx SP-9300XH Mode d'emploi
SnowEx
SnowEx VX-4210 Manuel utilisateur
SnowEx
SnowEx HELIXX Manuel utilisateur
SnowEx
SnowEx V-Pro 32300 Manuel utilisateur
SnowEx
SnowEx V-Pro 32200 Manuel utilisateur
SnowEx
SnowEx SP-9300 Manuel utilisateur
SnowEx
SnowEx SP-100 Manuel du propriétaire
SnowEx
SnowEx VX-4200 Manuel utilisateur
SnowEx
SnowEx SP-2400 Manuel du propriétaire
SnowEx
SnowEx HELIXX Series Manuel utilisateur
SnowEx
SnowEx HELIXX Manuel utilisateur
SnowEx
SnowEx VX-3210 Manuel utilisateur
SnowEx
SnowEx VX-1500 Manuel utilisateur
SnowEx
SnowEx V-Pro SP-2000 Manuel utilisateur
Manuels Épandeur populaires d'autres marques
Fisher
Fisher POLY-CASTER 78601 Manuel utilisateur
TurfEx
TurfEx RS7200 Manuel du propriétaire
Ferris
Ferris Pathfinder Series Manuel utilisateur
Fayat Group
Fayat Group DYNAPAC S100 Guide de dépannage
Art's-Way Manufacturing
Art's-Way Manufacturing X700 Manuel d'installation et d'exploitation
EASTMAN
EASTMAN CR 500 Manuel utilisateur
