SnowEx SP-65 Mode d'emploi
Walk-Behind Broadcast Spreader
SP-65
Owner's Manual and Installation Instructions
Original Instructions
April 15, 2017
Lit. No. 76519, Rev. 00
CAUTION
Read this document before operating or
servicing the spreader.
This document supersedes all editions with an earlier date.
This document is for SnowEx®SP-65 walk-behind broadcast spreaders with
serial numbers PA-201033 – PA-204133, and
serial numbers beginning with 140724 and higher.
Lit. No. 76519, Rev. 00 April 15, 2017
Lit. No. 76519, Rev. 00 3 April 15, 2017
TABLE OF CONTENTS
PREFACE..................................................................................................................................................................5
Owner's Information............................................................................................................................................5
LOADING ..................................................................................................................................................................7
SAFETY INFORMATION..........................................................................................................................................8
ASSEMBLY............................................................................................................................................................. 10
MAINTENANCE...................................................................................................................................................... 14
Lit. No. 76519, Rev. 00 April 15, 2017
Lit. No. 76519, Rev. 00 5 April 15, 2017
PREFACE
This manual has been prepared to acquaint you with
the safety information, operation and maintenance
of your new walk-behind spreader. Please read this
manual carefully and follow all recommendations. This
will help ensure profitable and trouble-free operation
of your spreader. Keep this manual accessible. It is a
handy reference in case minor service is required.
When service is necessary, bring your walk-behind
spreader to your distributor. They know your spreader
best and are interested in your complete satisfaction.
Register your spreader online at www.snowexproducts.com
OWNER'S INFORMATION
Owner's Name: _______________________________________________________________________
Date Purchased: ______________________________________________________________________
Outlet Name: ______________________________________________ Phone: ___________________
Outlet Address: _______________________________________________________________________
Spreader Type (Model):________________________________ Weight: ____________________ lb/kg
Spreader Serial Number:________________________________________________________________
Lit. No. 76519, Rev. 00 April 15, 2017
Lit. No. 76519, Rev. 00 7 April 15, 2017
LOADING YOUR SPREADER
Material Weights
Material Density
(lb/ft3)
Rock Salt 80–90
LOADING
SPREADING TIPS
• Use care when operating spreader near
pedestrians.
• Spread ice melting materials "with the storm" to
prevent unmanageable levels of ice from building.
• For a wider pass, increase pace.
• For a heavier pass, decrease pace.
ACCESSORIES
The following accessory is available from your
distributor.
Poly Deflector Kit (PDK-020)
Provides a tighter spread pattern for areas such as
sidewalks and walkways.
WARNING
Never remove spreader from vehicle with
material in it as this could cause damage to
the frame assembly.
WARNING
Do not overload spreader. Use chart below
to calculate weight of material. Weights of
material are an average for dry materials. CAUTION
DO NOT leave unused material in
hopper. Material can freeze or solidify,
causing unit to not work properly.
Empty and clean after each use.
CAUTION
Read and adhere to manufacturer's
ice-control material package
labeling including Material Safety
Data Sheet requirements.
Lit. No. 76519, Rev. 00 8 April 15, 2017
SAFETY
SAFETY DEFINITIONS
NOTE: Indicates a situation or action that can lead
to damage to your spreader and vehicle or other
property. Other useful information can also be
described.
CAUTION
Indicates a potentially hazardous situation
that, if not avoided, may result in minor or
moderate injury. It may also be used to alert
against unsafe practices.
WARNING
Indicates a potentially hazardous situation
that, if not avoided, could result in death or
serious personal injury.
LABELS
Please become familiar with the labels on the
spreader.
NOTE: If labels are missing or cannot be read, see
your sales outlet.
www.snowexproducts.com
ON/OFF Label
Serial Number Label
Code Definition
YY 2-Digit Year
MM 2-Digit Month
DD 2-Digit Day
LL 2-Digit Location Code
#### 4-Digit Sequential Number
SP-65 Model Number
Lit. No. 76519, Rev. 00 9 April 15, 2017
SAFETY
SAFETY PRECAUTIONS
Improper installation and operation could cause
personal injury and/or equipment and property
damage. Read and understand labels and this
Owner's Manual before installing, operating or making
adjustments.
WARNING
• Always make sure personnel are clear of
areas of danger when using equipment.
• Before working with the spreader, secure all
loose-fitting clothing and unrestrained hair.
• Do not climb into or ride on spreader.
• Never attempt to lift a unit with material in it.
• Always inspect unit for defects and
replace any broken, missing or worn parts
immediately.
• Always check areas to be spread to be sure
no hazardous conditions or substances are
in the area.
CAUTION
• Do not operate a spreader in need of
maintenance.
• Before operating the spreader, reassemble
any parts or hardware removed for cleaning
or adjusting.
• Before operating the spreader, remove
materials such as cleaning rags, brushes,
and hand tools from the spreader.
• Never use wet materials or materials with
foreign debris with this spreader. This unit
is designed to handle dry, clean free-flowing
material.
CAUTION
DO NOT leave unused material in
hopper. Material can freeze or solidify,
causing unit to not work properly.
Empty and clean after each use.
NOTE: Lubricate grease fittings after each use.
Use a good quality multipurpose grease.
PERSONAL SAFETY
• Wear only snug-fitting clothing while working on
your spreader.
• Do not wear jewelry or a necktie, and secure long
hair.
• Wear safety goggles to protect your eyes from dirt
and dust.
NOISE
Airborne noise emission during use is below 70 dB(A)
for the spreader operator.
VIBRATION
Operating spreader vibration does not exceed 2.5 m/s2
to the hand-arm or 0.5 m/s2to the whole body.
Lit. No. 76519, Rev. 00 10 April 15, 2017
3. Install left side drive wheel. Slide the 2" cotter pin
through both the wheel and axle.
ASSEMBLY INSTRUCTIONS
1. Remove the axle/spinner assembly. Slide the shaft
collars from the hardware kit onto the axle, one on
each side of the gearbox. Do not tighten.
2. Slide the hopper frame assemblies over the axle,
one on each side of the gearbox.
ASSEMBLY
One hole in axle (left).
Shaft Collars
Gearbox
One hole in axle
(left).
Hopper
Frame
Assemblies
2" Cotter
Pin
Left Wheel Installed
Autres manuels pour SP-65
1
Table des matières
Autres manuels SnowEx Épandeur
SnowEx
SnowEx V-Maxx G2 Manuel utilisateur
SnowEx
SnowEx Bulk Pro SP-1575 Mode d'emploi
SnowEx
SnowEx VX-3200 Manuel utilisateur
SnowEx
SnowEx HELIXX Series Manuel utilisateur
SnowEx
SnowEx VX-1500 Manuel utilisateur
SnowEx
SnowEx Renegade S150A Manuel utilisateur
SnowEx
SnowEx SP-85 Manuel du propriétaire
SnowEx
SnowEx VX-6010 Manuel utilisateur
SnowEx
SnowEx Bulk Pro 1575 Manuel utilisateur
SnowEx
SnowEx HELIXX Manuel utilisateur
SnowEx
SnowEx SP-7000 Manuel utilisateur
SnowEx
SnowEx Sidewalk-Pro SD-95 Mode d'emploi
SnowEx
SnowEx SP-100-1 Manuel utilisateur
SnowEx
SnowEx V-Pro 32300 Manuel utilisateur
SnowEx
SnowEx Sidewalk-Pro SD-95 Manuel utilisateur
SnowEx
SnowEx SP-1675 Manuel utilisateur
SnowEx
SnowEx VX-3210 Manuel utilisateur
SnowEx
SnowEx VX-4210 Manuel utilisateur
SnowEx
SnowEx SP-85 Mode d'emploi
SnowEx
SnowEx SP-9500X Manuel utilisateur
Manuels Épandeur populaires d'autres marques
Fisher
Fisher POLY-CASTER 78601 Manuel utilisateur
TurfEx
TurfEx RS7200 Manuel du propriétaire
Ferris
Ferris Pathfinder Series Manuel utilisateur
Fayat Group
Fayat Group DYNAPAC S100 Guide de dépannage
Art's-Way Manufacturing
Art's-Way Manufacturing X700 Manuel d'installation et d'exploitation
EASTMAN
EASTMAN CR 500 Manuel utilisateur
