SMART Board 800i6 Manuel utilisateur

SMARTBoard® 800i6

Interactive whiteboard systems

Configuration and user’s guide

FCC warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the US Federal Communications Commission

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause

harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Trade-mark notice

SMARTBoard, SMARTGoWire, SMARTMeetingPro, DViT, smarttech, the SMART logo and all SMART taglines are trade-marks or registered trade-marks of

SMARTTechnologiesULC in the US and/or other countries. TexasInstruments, BrilliantColor, DLP, and DLPLink are trademarks of TexasInstruments. Microsoft,

Windows and InternetExplorer are either registered trade-marks or trade-marks of Microsoft Corporation in the US and/or other countries. Blu-ray is a trade-mark

of Blu-ray Disc Association. All other third-party product and company names may be trade-marks of their respective owners.

translated into any language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to

change without notice and does not represent a commitment on the part of SMART.

This product and/or use thereof covered by one or more of the following US patents; smarttech.com/patents.

09/2013

Important information

Before you install and use your SMART Board® 480i6 interactive whiteboard system, read and

understand the safety warnings and precautions in this user’s guide and the included warnings

document. These safety warnings and precautions describe the safe and correct operation of

your interactive whiteboard system and its accessories, helping you to prevent injuries and

equipment damage. Ensure that your interactive whiteboard system is always being used

correctly.

In this document, “interactive whiteboard system” refers to the following:

lSMARTBoard 800 series interactive whiteboard

lSMARTUF70 or SMARTUF70w projector

lAccessories and optional equipment

The projector included with your system is designed to work only with certain SMARTBoard

interactive whiteboard models. Contact your authorised SMART reseller (smarttech.com/where)

for more information.

Safety warnings, cautions and important

information

Installation

WARNING

lFailure to follow the installation instructions included with your SMART product could

result in personal injury and damage to the product.

lTo reduce the risk of fire or electric shock, do not expose the SMART product to rain or

moisture.

lTwo people are required to mount your SMART product because it may be too heavy for

one person to safely manoeuvre.

When you lift your interactive whiteboard, you and your assistant should stand on either

side of the screen, supporting its weight at the bottom whilst balancing the top with your

other hands.

I M P O R T A N T I N F O R M A T I O N

lWhen mounting the projector boom on a framed or hollow wall, attach the mounting

bracket to a stud to safely support the projector’s weight. If you use only drywall anchors,

the drywall can fail, resulting in possible personal injury, and damage to the product which

may not be covered by your warranty.

lDo not leave cables on the floor where they can be a tripping hazard. If you must run a

cable over the floor, lay it in a flat, straight line and secure it to the floor with tape or a cable

management strip of a contrasting colour. Handle cables carefully and avoid excessive

bending.

C A U T I O N

lDo not operate this unit immediately after moving it from a cold location to a warm

location. When the unit is exposed to such a change in temperature, moisture can

condense on the lens and crucial internal parts. Allow the system to stabilise to room

temperature before operation to prevent possible damage to the unit.

lDo not place the unit in hot locations, such as near heating equipment. Doing so could

cause a malfunction and shorten the life of the projector.

lAvoid setting up and using the SMART product in an area with excessive levels of dust,

humidity and smoke.

lDo not place your SMART product in direct sunlight or near any appliance that generates a

strong magnetic field.

lIf you need to lean the interactive whiteboard against a wall before you mount it, make

sure that it remains in an upright position, resting on the pen tray brackets, which can

sustain the weight of the interactive whiteboard.

Do not rest the interactive whiteboard on its side or on the top of the frame.

lYou must connect the USB cable that came with your SMARTBoard interactive

whiteboard to a computer that has a USB compliant interface and that bears the USB

logo. In addition, the USB source computer must be compliant with CSA/UL/EN 60950

and bear the CE mark and CSA and/or UL Mark(s) for CSA/UL 60950. This is for operating

safety and to avoid damage to the SMARTBoard interactive whiteboard.

I M P O R T A N T

lUse the SMARTBoard 800i6-SMP interactive whiteboard system installation guide

(smarttech.com/kb/157703) and theSMARTBoard 800i6-SMP interactive whiteboard

system quick installation guide (smarttech.com/kb/170TBA) to install your interactive

whiteboard system.

I M P O R T A N T I N F O R M A T I O N

iii

lThe SMARTBoard 880i6 and 885i6 interactive whiteboard system textless installation

guide is also available online (smarttech.com/kb/170499).

lMake sure an electrical socket is near your SMART product and remains easily

accessible during use.

lUsing your SMART product near a TV or radio could cause interference to the images or

sound. If this happens, move the TV or radio away from the projector.

Operation

WARNING

lIf you are using an external audio system, use only the power supply included with that

product. Using the wrong power supply might create a safety hazard or damage the

equipment. If in doubt, refer to the specification sheet for your product to verify the power

supply type.

lDo not climb (or allow children to climb) on a wall- or stand-mounted SMARTBoard

interactive whiteboard.

Do not climb on, hang from or suspend objects from the projector boom.

Climbing on the interactive whiteboard or projector boom could result in personal

injury or product damage.

lTo prevent injury or product and property damage, use only the mounting hardware

supplied with your SMARTBoard 800 series interactive whiteboard when you install your

product on drywall. The mounting hardware provided with other interactive whiteboards

may not be strong enough to support the weight of SMARTBoard 800 series interactive

whiteboards.

C A U T I O N

lDo not block the projector’s ventilation slots and openings.

lIf dust or small items prevent pen tray buttons from being pressed or cause constant

button contact, remove the obstructions carefully.

I M P O R T A N T

lKeep your remote control in a safe place because there is no other way to access menu

options.

lDo not disconnect cables from the ECP to connect peripheral devices because you could

disconnect controls for your interactive whiteboard.

lDisconnect the product from its power source when it’s not used for a long period.

I M P O R T A N T I N F O R M A T I O N

Other precautions

If you own a SMARTproduct other than a SMARTBoard 880i6 and 885i6 series interactive

whiteboard system, refer to the installation manual for your product for relevant warnings and

maintenance instructions.

Environmental requirements

Before you install your SMART Board 480 interactive whiteboard system, review the following

environmental requirements.

Environmental

requirement

Parameter

Operating temperature l5°C to 35°C (41°F to 95°F) from 0m to 1800m (0' to 6000')

l5°C to 30°C (41°F to 86°F) from 1800m to 3000m (6000' to 9800')

Storage temperature

Humidity

Water and fluid

resistance

lIntended for indoor use only. Doesn’t meet any salt-spray or water

ingress requirements.

lDon’t pour or spray liquids directly onto your interactive

whiteboard, the projector or any of its sub-components.

Dust lIntended for use in office and classroom environments. Not for

industrial use where heavy dust and pollutants can cause

malfunctions or impaired operation. Periodic cleaning is required in

areas with heavier dust. See Cleaning the projector on page 35 for

information on cleaning the projector.

Electrostatic

discharge (ESD)

lEN61000-4-2 severity level 4 for direct and indirect ESD

lNo malfunction or damage up to 8kV (both polarities) with a

330ohm, 150 pF probe (air discharge)

lUnmated connectors meet no malfunction or damage up to 4kV

(both polarities) for direct (contact) discharge

Cables lAll SMART Board 480i6 interactive whiteboard system cables

should be shielded to prevent potential accidents and degraded

video and audio quality.

Conducted and

radiated emissions

lEN55022/CISPR 22, Class A

v
Contents
Important information i
Safety warnings, cautions and important information i
Installation i
Operation iii
Other precautions iv
Environmental requirements iv
Chapter 1: About your interactive whiteboard system 1
SMART Board 480i6 interactive whiteboard system features 2
SMARTBoard 800 series interactive whiteboard 2
SMARTUF70 or SMARTUF70w projector 3
Extended Control Panel (ECP) 4
Included accessories 4
Remote control 4
Pens 4
Eraser 4
VGA connection kit 5
SMART Board 480i6 interactive whiteboard system accessories 5
RCA connector pod 5
Chapter 2: Installing your interactive whiteboard system 7
Choosing a location 7
Choosing a height 8
Securing your interactive whiteboard system 9
Locking the pen tray to your interactive whiteboard 9
Securing the projector to the boom 9
Routing the cables 9
Installing SMART software 10

C O N T E N T S
vi
Chapter 3: Using your interactive whiteboard system 11
Using your projector 11
Using your remote control 11
Replacing the remote control battery 12
Using the remote control buttons 13
Adjusting projector settings 14
Focusing the image 20
Adjusting the image 21
Projector connection diagram 21
Using your interactive whiteboard 23
Using the Extended Control Panel (ECP) 23
Using the RCA connector pod 25
Appendix 4: Integrating other devices 27
Video format compatibility 27
Native video format 27
Video format compatibility 28
SMARTUF70 projector 28
SMARTUF70w projector 29
HD and SD signal format compatibility 31
SMARTUF70 projector 31
SMARTUF70w projector 31
Video system signal compatibility 32
SMARTUF70 projector 32
SMARTUF70w projector 32
Connecting peripheral sources and outputs 33
Chapter 5: Maintaining your interactive whiteboard system 35
Maintaining your interactive whiteboard 35
Cleaning the projector 35
Focusing and adjusting the projector image 36

C O N T E N T S
vii
Replacing the projector lamp 37
Removing and replacing the projector lamp module 37
Resetting the lamp hours 40
Chapter 6: Troubleshooting your interactive whiteboard system 43
Before you start 44
Locating status lights 44
Locating serial numbers 45
Determining your interactive whiteboard system’s status 46
Resolving interactive whiteboard issues 47
Resolving operation issues 47
Resolving connection issues 48
Resolving controller module issues 48
Resolving projector issues 49
Resolving projector errors 49
Resolving image issues 49
Loss of signal 49
Partial, scrolling or incorrectly displayed image 50
Unstable or flickering image 50
Frozen image 51
Your image doesn’t fit the interactive whiteboard 51
The image from your connected laptop computer isn’t projected 51
Unaligned projected image 51
Resolving audio issues 52
Resolving network communication issues 53
Resolving ECP issues 53
Accessing the service menu 53
Retrieving your password 54
Resetting the projector 54
Transporting your interactive whiteboard system 54

Table des matières

Autres manuels SMART Board Tableau blanc interactif

SMART Board

SMART Board Interactive whiteboard Manuel utilisateur

SMART Board

SMART Board M600 series Manuel utilisateur

SMART Board

SMART Board SB480iv2 Manuel utilisateur

SMART Board

SMART Board Board E70 Manuel utilisateur

SMART Board

SMART Board SBID8055i-G5-SMP Manuel utilisateur

SMART Board

SMART Board SB800ix2 Manuel utilisateur

SMART Board

SMART Board 600i Series Manuel de l'opérateur

SMART Board

SMART Board 3000i Manuel utilisateur

SMART Board

SMART Board Board X800 Series Manuel utilisateur

SMART Board

SMART Board 600i4 Manuel utilisateur

SMART Board

SMART Board M685ix2 Manuel utilisateur

SMART Board

SMART Board SB685ix2 Manuel utilisateur

SMART Board

SMART Board M685ix2 Manuel utilisateur

SMART Board

SMART Board SB685ix2 Manuel utilisateur

SMART Board

SMART Board 6000 series Manuel utilisateur

SMART Board

SMART Board 685ix Manuel utilisateur

SMART Board

SMART Board SB680-MP Manuel utilisateur

SMART Board

SMART Board Board 2000i Manuel utilisateur

SMART Board

SMART Board 600i3 Manuel utilisateur

SMART Board

SMART Board 600ix Manuel utilisateur

SMART Board

SMART Board 880-SMP Manuel utilisateur

SMART Board

SMART Board 400 series Guide de configuration

SMART Board

SMART Board X800ix Manuel utilisateur

SMART Board

SMART Board M600i6 Manuel utilisateur

Manuels Tableau blanc interactif populaires d'autres marques

SMART

SMART KAPP42 Manuel utilisateur

HitachiSoft

HitachiSoft StarBoard FX-TRIO-88W Manuel utilisateur

Buhl

Buhl LyteBoard Manuel utilisateur

SMART

SMART SBX880 Manuel utilisateur

Legamaster

Legamaster e-SCREEN ETX Manuel utilisateur

Seneca

Seneca eno Manuel utilisateur

BenQ

BenQ RP840G Manuel utilisateur

SMART

SMART Sympodium IC-150 Manuel utilisateur

Olivetti

Olivetti OLIBOARD Manuel utilisateur

Turning Technologies

Turning Technologies MOBIVIEW Manuel utilisateur

Panasonic

Panasonic UB-5335 Manuel utilisateur

Dukane

Dukane ITP84 Manuel utilisateur

Bretford

Bretford EDUIMS Guide de configuration

Panasonic

Panasonic Panaboard UB-5315 Manuel utilisateur

Plus

Plus M-11S Manuel utilisateur

TRIUMPH BOARD

TRIUMPH BOARD ULTRA SLIM Manuel utilisateur

Returnstar Interactive Tech

Returnstar Interactive Tech IQBoard DVT V7.0 Manuel utilisateur

AVer

AVer CP series Manuel utilisateur