SMART Board SB480iv2 Manuel utilisateur

SMARTBoard® iv2

interactive whiteboard system

SB480iv2 AND SBM680Viv2

CONFIGURATION AND USER’S GUIDE

smarttech.com/kb/170782

FCC warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

Trademark notice

SMARTBoard, SMARTNotebook, smarttech, DViT, the SMART logo and all SMART taglines are trademarks or registered trademarks of

SMARTTechnologiesULC in the U.S. and/or other countries. BrilliantColor, DLP and TexasInstruments are trademarks of TexasInstruments. Windows and

InternetExplorer are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Apple, iMac, Macintosh, Mac, MacOS

and MacOSX are trademarks of Apple Inc., registered in the U.S. and other countries. Blu-ray is a trademark of the Blu-ray Disc Association. Crestron and

RoomView are either trademarks or registered trademarks of Crestron Electornics, Inc. in the United States and/or other countries. All other third-party product

and company names may be trademarks of their respective owners.

translated into any language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to change

without notice and does not represent a commitment on the part of SMART.

This product and/or use thereof covered by one or more of the following U.S. patents.

www.smarttech.com/patents

10/2014

i smarttech.com/kb/170782

Important information

Before you install and use your SMARTBoard interactive whiteboard system, read and understand

the safety warnings and precautions in this user’s guide and the included important information

document. These safety warnings and precautions describe the safe and correct operation of your

interactive whiteboard system and its accessories, helping you to prevent injuries and equipment

damage. Ensure that your interactive whiteboard system is always being used correctly.

In this document, “interactive whiteboard system” refers to the following:

lSMARTBoard 480 interactive whiteboard, SMARTV30 projector, accessories and optional

equipment

lSMARTBoard M600V series interactive whiteboard, SMARTV30 projector, accessories and

optional equipment

The projector included with your system is designed to work only with certain SMARTBoard

interactive whiteboard models. Contact your authorized SMART reseller (smarttech.com/where) for

more information.

Safety warnings, cautions and important

information

Installation

WARNING

lFailure to follow the installation instructions shipped with your SMART product could result in

personal injury and damage to the product.

lTo reduce the risk of fire or electric shock, do not expose the SMART product to rain or

moisture.

IMPORTANT INFORMATION

ii smarttech.com/kb/170782

lTwo people are required to mount your SMART product because it may be too heavy for

one person to safely maneuver.

When you lift your interactive whiteboard, you and your assistant should stand on either side

of the screen, supporting its weight at the bottom while balancing the top with your other

hands.

lWhen mounting the projector boom on a framed or hollow wall, attach the mounting bracket

to a stud to safely support the projector’s weight. If you use only drywall anchors, the drywall

can fail, resulting in possible personal injury, and damage to the product which may not be

covered by your warranty.

lDo not leave cables on the floor where they can be a tripping hazard. If you must run a cable

over the floor, lay it in a flat, straight line and secure it to the floor with tape or a cable

management strip of a contrasting color. Handle cables carefully and avoid excessive

bending.

CAUTION

lDo not operate this unit immediately after moving it from a cold location to a warm location.

When the unit is exposed to such a change in temperature, moisture can condense on the

lens and crucial internal parts. Allow the system to stabilize to room temperature before

operation to prevent possible damage to the unit.

lDo not place the unit in hot locations, such as near heating equipment. Doing so could cause

a malfunction and shorten the life of the projector.

lAvoid setting up and using the SMART product in an area with excessive levels of dust,

humidity and smoke.

lDo not place your SMART product in direct sunlight or near any appliance that generates a

strong magnetic field.

lIf you need to lean the interactive whiteboard against a wall before you mount it, make sure

it remains in an upright position, resting on the pen tray brackets, which can sustain the

weight of the interactive whiteboard.

Do not rest the interactive whiteboard on its side or on the top of the frame.

IMPORTANT INFORMATION

iii smarttech.com/kb/170782

lYou must connect the USB cable that came with your SMARTBoard interactive whiteboard

to a computer that has a USB compliant interface and that bears the USB logo. In addition,

the USB source computer must be compliant with CSA/UL/EN 60950 and bear the CE mark

and CSA and/or UL Mark(s) for CSA/UL 60950. This is for operating safety and to avoid

damage to the SMARTBoard interactive whiteboard.

IMPORTANT

lThe SMARTBoard M680Viv2 and 480iv2 interactive whiteboard system textless installation

guide is also available online (smarttech.com/kb/170779).

lMake sure an electrical socket is near your SMART product and remains easily accessible

during use.

lUsing your SMART product near a TV or radio could cause interference to the images or

sound. If this happens, move the TV or radio away from the projector.

Operation

WARNING

lIf you are using an external audio system, use only the power supply included with that

product. Using the wrong power supply might create a safety hazard or damage the

equipment. If in doubt, refer to the specification sheet for your product to verify the power

supply type.

lDo not climb (or allow children to climb) on a wall- or stand-mounted SMARTBoard

interactive whiteboard.

lDo not climb on, hang from or suspend objects from the projector boom.

lClimbing on the interactive whiteboard or projector boom could result in

personal injury or product damage.

CAUTION

Do not block the projector’s ventilation slots and openings.

IMPORTANT

lKeep your remote control in a safe place because there is no other way to access menu

options.

lDisconnect the product from its power source when it is not used for a long period.

IMPORTANT INFORMATION

iv smarttech.com/kb/170782

Other precautions

If you own a SMARTproduct other than a SMARTBoard 480iv2 interactive whiteboard system or

SMARTBoard M680Viv2 interactive whiteboard system, refer to the installation manual for your

product for relevant warnings and maintenance instructions.

Environmental requirements

Before you install your SMARTBoard interactive whiteboard system, review the following

environmental requirements.

Environmental

requirement

Parameter

Interactive whiteboard

operating temperature

l41°F to 95°F (5°C to 35°C) from 0' to 6000' (0 m to 1800 m)

l41°F to 86°F (5°C to 30°C) from 6000' to 9800' (1800 m to 3000 m)

Projector operating

temperature

l41°F to 104°F (5°C to 40°C) from 0' to 2500' (0 m to 762 m)

l41°F to 95°F (5°C to 35°C) from 2500' to 5000' (762 m to 1524 m)

l41°F to 86°F (5°C to 30°C) from 5000' to 10 000' (1524 m to 3048 m)

Storage temperature -4°F to 122°F (-20°C to 50°C)

Humidity l5% to 80% operating relative humidity, non-condensing

l5% to 80% storage relative humidity, non-condensing

Water and fluid

resistance

lIntended for indoor use only. Doesn’t meet any salt-spray or water

ingress requirements.

lDon’t pour or spray liquids directly onto your interactive whiteboard,

the projector or any of its sub-components.

Dust lIntended for use in office and classroom environments. Not for

industrial use where heavy dust and pollutants can cause

malfunctions or impaired operation. Periodic cleaning is required in

areas with heavier dust. See

Cleaning the projector

on page27 for

information on cleaning the SMARTV30 projector. See

Cleaning

the air filters

on page31 for information on cleaning the air filters in

the SMARTV30 projector.

Electrostatic discharge

(ESD)

lEN61000-4-2 severity level 4 for direct and indirect ESD

lNo malfunction or damage up to 8 kV (both polarities) with a

330ohm, 150 pF probe (air discharge)

lUnmated connectors meet no malfunction or damage up to 4 kV

(both polarities) for direct (contact) discharge

Cables All SMARTBoard interactive whiteboard system cables should be

shielded to prevent potential accidents and degraded video and audio

quality.

IMPORTANT INFORMATION

v smarttech.com/kb/170782

Environmental

requirement

Parameter

Conducted and

radiated emissions

EN55022/CISPR 22, Class A

vii smarttech.com/kb/170782

Contents

Important information i

Safety warnings, cautions and important information i

Environmental requirements iv

Chapter 1: About your interactive whiteboard system 1

SMART V30 projector 2

SMARTBoard 480iv2 interactive whiteboard system features 3

SMARTBoard M680Viv2 interactive whiteboard system features 4

Included accessories 5

Other optional accessories 5

Chapter 2: Installing your interactive whiteboard system 7

Choosing a location 8

Choosing a height 8

Installing SMART software 9

Setting up the projector image 9

Integrating your system with peripheral devices 13

Chapter 3: Using your interactive whiteboard system 15

Using your projector 15

Using your interactive whiteboard 24

Chapter 4: Maintaining your interactive whiteboard system 25

Maintaining your interactive whiteboard 25

Cleaning the projector 27

Focusing and adjusting the projector image 27

Removing and replacing the projector lamp module 27

Resetting the lamp hours 29

Replacing the remote control battery 30

Cleaning the air filters 31

Chapter 5: Troubleshooting your interactive whiteboard system 33

Before you start 34

Resolving interactive whiteboard issues 35

Determining your SMARTV30 projector status 36

Resolving projector issues 37

Resolving audio issues 42

Resolving network communication issues 43

Resetting your password 43

CONTENTS

viii smarttech.com/kb/170782

Transporting your interactive whiteboard system 44

Appendix A: Remotely managing your system through a network interface 45

Web page management 45

Appendix B: Remotely managing your system through an RS-232 serial interface 51

Connecting your room control system to the SMARTV30 projector 52

Projector programming commands 53

Appendix C: Adjusting projector settings 55

Appendix D: Integrating other devices 61

Video format 61

Connecting peripheral sources and outputs 64

Appendix E: Remote control code definitions 67

Appendix F: Hardware environmental compliance 69

Waste Electrical and Electronic Equipment and Battery regulations (WEEE and

BatteryDirectives) 69

Batteries 69

Mercury 69

More information 69

Index 71

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SMART Board Tableau blanc interactif

SMART Board

SMART Board 800i5e-MP series Manuel utilisateur

SMART Board

SMART Board M600ix3 Manuel utilisateur

SMART Board

SMART Board Board 800ix2 Manuel utilisateur

SMART Board

SMART Board 800i6 Manuel utilisateur

SMART Board

SMART Board 685ix Manuel utilisateur

SMART Board

SMART Board X800ix Manuel utilisateur

SMART Board

SMART Board SB680-MP Manuel utilisateur

SMART Board

SMART Board Board X800i4 Manuel utilisateur

SMART Board

SMART Board 685ix Manuel utilisateur

SMART Board

SMART Board 680iv Manuel utilisateur

SMART Board

SMART Board 7000 series Manuel utilisateur

SMART Board

SMART Board SB660 64" Manuel utilisateur

SMART Board

SMART Board 885ix-SMP Manuel utilisateur

SMART Board

SMART Board 800ixe-MP Manuel utilisateur

SMART Board

SMART Board 3000i Manuel utilisateur

SMART Board

SMART Board 600i Series Manuel de l'opérateur

SMART Board

SMART Board M685ix2 Manuel utilisateur

SMART Board

SMART Board SBID8055i-G5-SMP Manuel de service

SMART Board

SMART Board SB685ix2 Manuel utilisateur

SMART Board

SMART Board In-WallRear Projection SMART Board Manuel utilisateur

SMART Board

SMART Board 600 Series Manuel utilisateur

SMART Board

SMART Board SB685ix2 Manuel utilisateur

SMART Board

SMART Board M600 series Manuel utilisateur

SMART Board

SMART Board 880i5-SMP Manuel utilisateur

Manuels Tableau blanc interactif populaires d'autres marques

SMART

SMART KAPP42 Manuel utilisateur

HitachiSoft

HitachiSoft StarBoard FX-TRIO-88W Manuel utilisateur

Buhl

Buhl LyteBoard Manuel utilisateur

SMART

SMART SBX880 Manuel utilisateur

Legamaster

Legamaster e-SCREEN ETX Manuel utilisateur

Seneca

Seneca eno Manuel utilisateur

BenQ

BenQ RP840G Manuel utilisateur

SMART

SMART Sympodium IC-150 Manuel utilisateur

Olivetti

Olivetti OLIBOARD Manuel utilisateur

Turning Technologies

Turning Technologies MOBIVIEW Manuel utilisateur

Panasonic

Panasonic UB-5335 Manuel utilisateur

Dukane

Dukane ITP84 Manuel utilisateur

Bretford

Bretford EDUIMS Guide de configuration

Panasonic

Panasonic Panaboard UB-5315 Manuel utilisateur

Plus

Plus M-11S Manuel utilisateur

TRIUMPH BOARD

TRIUMPH BOARD ULTRA SLIM Manuel utilisateur

Returnstar Interactive Tech

Returnstar Interactive Tech IQBoard DVT V7.0 Manuel utilisateur

AVer

AVer CP series Manuel utilisateur