SIGMA TEK STO 081 Manuel utilisateur

STO 081

S-DIAS Safety

Digital Output Module

Instruction Manual

Date of creation: 18.12.2013

Version date: 05.12.2023

Article number: 20-892-081-E

Publisher: SIGMATEK GmbH & Co KG

A-5112 Lamprechtshausen

Tel.: +43/6274/4321

Fax: +43/6274/4321-18

Email: [email protected]

WWW.SIGMATEK-AUTOMATION.COM

SIGMATEK GmbH & Co KG

Translation of the Original Instruction

distributed in any form (print, photocopy, microfilm or in any other process) without the express permission.

We reserve the right to make changes in the content without notice. The SIGMATEK GmbH & Co KG is not responsible

for technical or printing errors in the handbook and assumes no responsibility for damages that occur through use

of this handbook.

S-DIAS SAFETY DIGITAL OUTPUT MODULE STO 081

05.12.2023 Page 1

S-DIAS Safety Digital Output Module STO 081

The S-DIAS Safety STO 081 digital output module has the safety integrity

level SIL3 (EN IEC 62061) or Performancelevel e (PL e) (EN ISO 13849).

The STO 081 has:

•8 secure outputs (EN 61131-2; EN IEC 62061 und EN ISO

13849)

The safe outputs are used for the safety-oriented output of eight actuator

signals to, for example, control relays, valves, etc.

The safety-related STO 081 is ideal for use in systems with optional

modules and interface variables according to Safety System Handbook,

see homepage

To use the STO 081 in an application, at least one Safety CPU module that

regulates the synchronized communication with the safety modules using

safe bus telegrams is also required. This also includes

•processing the safe application and

•the distribution of configuration data to remote Safety

modules.

Using the search function with the keyword “Safety System Handbook”

STO 081 S-DIAS SAFETY DIGITAL OUTPUT MODULE 
 
Page 2 05.12.2023 
Contents 
1Introduction............................................................................. 5 
1 Target Group/Purpose of this Operating Manual......................5 
2 Important Reference Documentation .........................................5 
3 Contents of Delivery.....................................................................5 
2Basic Safety Guidelines......................................................... 6 
1 Symbols Used...............................................................................6 
2 Disclaimer......................................................................................8 
3 General Safety Directives ............................................................9 
4 Designated Use...........................................................................11 
5 Software/Training .......................................................................12 
3Standards and Directives......................................................13 
1 Residual Risks ............................................................................13 
2 Safety of the Machine or Equipment ........................................13 
3 Directives.....................................................................................13 
3.1 Functional Safety Standards..............................................................14 
3.2 EU Conformity Declaration................................................................14 
4 Safety-Relevant Parameters......................................................15 
4.1 Mounting Position Horizontal 0-55 °C Ambient Temperature ............15 
4.2 Mounting Position Horizontal 0-60 °C Ambient Temperature ............15 
5 Compatibility...............................................................................16 
4Type Plate...............................................................................17 

 S-DIAS SAFETY DIGITAL OUTPUT MODULE STO 081 
 
12.2023 Page 3 
5Technical Data.......................................................................18 
1 Output Specifications.................................................................18 
1.1 Maximum Inductive Load L (mH) at Load Current I (A)..................... 19 
1.2 Maximum Capacitive Load C (µF) at Load Current I (A)................... 20 
2 Output Circuit..............................................................................21 
3 Electrical Requirements.............................................................21 
4 Miscellaneous .............................................................................23 
5 Environmental Conditions.........................................................23 
6Mechanical Dimensions........................................................24 
7Connector Layout..................................................................25 
1 Status LEDs.................................................................................26 
2 Applicable Connectors...............................................................26 
3 Label Field...................................................................................27 
8Wiring.....................................................................................28 
1 Wiring Example...........................................................................28 
2 Note..............................................................................................29 
9Assembly/Installation ...........................................................30 
1 Check Contents of Delivery.......................................................30 
2 Mounting......................................................................................31 
Transport/Storage .................................................................33 
Storage...................................................................................33 

STO 081 S-DIAS SAFETY DIGITAL OUTPUT MODULE

Page 4 05.12.2023

12 Maintenance...........................................................................34

12.1 Service.........................................................................................34

12.2 Repair...........................................................................................34

13 Disposal..................................................................................34

S-DIAS SAFETY DIGITAL OUTPUT MODULE STO 081

05.12.2023 Page 5

1 Introduction

1.1 Target Group/Purpose of this Operating Manual

This operating manual contains all information required for the operation of the product.

This operating manual is intended for:

•Project planners

•Technicians

•Commissioning engineers

•Machine operators

•Maintenance/test technicians

General knowledge of automation technology is required.

Further help and training information, as well as the appropriate accessories can be found on

our website www.sigmatek-automation.com.

Our support team is happily available to answer your questions.

Please see our website for our hotline number and business hours.

1.2 Important Reference Documentation

•Safety System Handbook

This and additional documents can be downloaded from our website or obtained through

support.

1.3 Contents of Delivery

1x STO 081

STO 081 S-DIAS SAFETY DIGITAL OUTPUT MODULE

Page 6 05.12.2023

2 Basic Safety Guidelines

2.1 Symbols Used

The following symbols are used in the operator documentation for warning and danger

messages, as well as informational notes:

DANGER

Danger indicates that death or serious injury will occur, if the

specified measures are not taken.

To avoid death or serious injuries, observe all guidelines.

Danger indique une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

WARNING

Warning indicates that death or serious injury can occur, if the

specified measures are not taken.

To avoid death or serious injuries, observe all guidelines.

Avertissement d’une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

CAUTION

Caution indicates that moderate to slight injury can occur, if the

specified measures are not taken.

To avoid moderate to slight injuries, observe all guidelines.

Attention indique une situation dangereuse qui, faute de prendre les

mesures adéquates, peut entraîner des blessures assez graves ou

légères.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

S-DIAS SAFETY DIGITAL OUTPUT MODULE STO 081

05.12.2023 Page 7

CAUTION

Danger for ESD-sensitive components.

Les signes de danger pour les composants sensibles aux décharges

électrostatiques.

INFORMATION

Information

Provides important information on the product, handling or

relevant sections of the documentation, which require

attention.

STO 081 S-DIAS SAFETY DIGITAL OUTPUT MODULE

Page 8 05.12.2023

2.2 Disclaimer

INFORMATION

The contents of this operating manual were prepared with the greatest

care. However, deviations cannot be ruled out. This operating manual

is regularly checked and required corrections are included in the

subsequent versions. The machine manufacturer is responsible for the

proper assembly, as well as device configuration. The machine

operator is responsible for safe handling, as well as proper operation.

The current operating manual can be found on our website. If

necessary, contact our support.

Subject to technical changes, which improve the performance of the

devices. The following operating manual is purely a product

description. It does not guarantee properties under the warranty.

Please thoroughly read the corresponding documents and this

operating manual before handling a product.

SIGMATEK GmbH & Co KG is not liable for damages caused

through, non-compliance with these instructions or applicable

regulations.

Autres manuels pour STO 081

Table des matières

Autres manuels SIGMA TEK Unité de contrôle

SIGMA TEK

SIGMA TEK MDD 111-2 Manuel utilisateur

SIGMA TEK

SIGMA TEK CSDI 162 Manuel utilisateur

SIGMA TEK

SIGMA TEK SDM 081 Manuel utilisateur

SIGMA TEK

SIGMA TEK MDP 102-1 Manuel utilisateur

SIGMA TEK

SIGMA TEK PL 221 Manuel utilisateur

SIGMA TEK

SIGMA TEK HZS 7321 Manuel utilisateur

SIGMA TEK

SIGMA TEK KL 181 Manuel utilisateur

SIGMA TEK

SIGMA TEK HMI-Link G2 Device Manuel utilisateur

SIGMA TEK

SIGMA TEK STO 081 Manuel utilisateur

SIGMA TEK

SIGMA TEK VI 021 Manuel utilisateur

SIGMA TEK

SIGMA TEK SCP 111-2 Manuel utilisateur

SIGMA TEK

SIGMA TEK S-DIAS DM 821 Manuel utilisateur

SIGMA TEK

SIGMA TEK C-DIAS Manuel utilisateur

SIGMA TEK

SIGMA TEK S-DIAS EC 121 Manuel utilisateur

SIGMA TEK

SIGMA TEK CCP 531 Manuel utilisateur

SIGMA TEK

SIGMA TEK DIAS-Drive 2000 Manuel utilisateur

SIGMA TEK

SIGMA TEK SCP 111-S Manuel utilisateur

SIGMA TEK

SIGMA TEK ST 011 Manuel utilisateur

SIGMA TEK

SIGMA TEK CP 112 Manuel utilisateur

SIGMA TEK

SIGMA TEK SCP 011 Manuel utilisateur

SIGMA TEK

SIGMA TEK AO 046 Manuel utilisateur

SIGMA TEK

SIGMA TEK SCP 111 Manuel utilisateur

SIGMA TEK

SIGMA TEK DC 061-1 Manuel utilisateur

SIGMA TEK

SIGMA TEK PIM 041-W Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur