Siemens SITRANS LR260 Manuel utilisateur

SITRANS

Radar Transmitters

SITRANS L 260 ( )R PROFIBUS PA

Operating Instructions 03/2013

A5E32114443 SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL Page EN-1

mmmmm

English

SITRANS LR260 (PROFIBUS PA) Quick Start

Manual

This manual outlines the essential features and functions of the SITRANS LR260 (PROFIBUS PA).

We strongly advise you to acquire the detailed version of the manual so you can use your

instrument to its fullest potential. The complete manual can be downloaded from the product

page of our web site at: www.siemens.com/LR260. The printed manual is available from your

local Siemens Milltronics representative.

Questions about the contents of this manual can be directed to:

Siemens Milltronics Process Instruments

1954 Technology Drive, P.O. Box 4225

Peterborough, Ontario, Canada, K9J 7B1

Email: techpubs.smpi@siemens.com

MILLTRONICS is a registered trademark of Siemens Milltronics Process Instruments.

Technical Support

Support is available 24 hours a day.

To find your local Siemens Automation Office address, phone number and fax number go to:

www.siemens.com/automation/partner:

• Click on the tab Contacts by Product then find your product group (+Process Automation

> +Process Instrumentation > +Level Measuring Instruments).

• Select the team Technical Support. Click on Next.

• Click on a continent, then a country, followed by a city. Click on Next.

For on-line technical support go to: www.siemens.com/automation/support-request

• Enter the device name (SITRANS LR260) or order number, then click on Search, and

select the appropriate product type. Click on Next.

• Enter a keyword describing your issue. Then either browse the relevant documentation,

or click on Next to email a description of your issue to Siemens Technical Support staff.

Siemens A&D Technical Support Center: phone +49 180 50 50 222

fax +49 180 50 50 223

Process Instruments 2013.

Disclaimer of Liability

We encourage users to purchase autho-

rized bound manuals, or to view elec-

tronic versions as designed and

authored by Siemens Milltronics Process

Instruments. Siemens Milltronics Pro-

cess Instruments will not be responsible

for the contents of partial or whole

reproductions of either bound or elec-

tronic versions.

While we have verified the contents of this manual

for agreement with the instrumentation described,

variations remain possible. Thus we cannot guar-

antee full agreement. The contents of this manual

are regularly reviewed and corrections are

included in subsequent editions. We welcome all

suggestions for improvement.

Technical data subject to change.

Page EN-2 SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL A5E32114443

mmmmm

English

Safety Guidelines

Warning notices must be observed to ensure personal safety as well as that of others, and to

protect the product and the connected equipment. These warning notices are accompanied by

a clarification of the level of caution to be observed.1

FCC Conformity

US Installations only: Federal Communications Commission (FCC) rules

SITRANS LR260

SITRANS LR260 is a 2-wire 25 GHz pulse radar level transmitter for continuous monitoring of

solids in storage vessels including extreme levels of dust and high temperatures, to a range of

30 m (98.4 ft).

The instrument consists of an electronic component coupled to a horn antenna with an

integral Easy Aimer and flange for quick and easy positioning. A dust cover or air purging are

available as options.

WARNING: relates to a caution symbol on the product, and means that failure to

observe the necessary precautions can result in death, serious injury, and/or

considerable material damage.

WARNING1: means that failure to observe the necessary precautions can result

in death, serious injury, and/or considerable material damage.

Note: means important information about the product or that part of the operating manual.

1. This symbol is used when there is no corresponding caution symbol on the product.

WARNING: Changes or modifications not expressly approved by Siemens

Milltronics could void the user’s authority to operate the equipment.

Notes:

• This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

• This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference to radio communications, in which case the user will

be required to correct the interference at his own expense.

WARNING: SITRANS LR260 is to be used only in the manner outlined in this

manual, otherwise protection provided by the equipment may be impaired.

Note: This product is designated as a Pressure Accessory per Directive 97 / 23 / EC, and is

not intended for use as a safety device.

A5E32114443 SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL Page EN-3

mmmmm

English

SITRANS LR260 supports PROFIBUS PA communication protocol, and SIMATIC PDM software.

Signals are processed using Process Intelligence which has been field-proven in over 

1, 000,000 applications worldwide (ultrasonic and radar). This device supports acyclic

communications from both a PROFIBUS Class I and Class II master.

Specifications

For a complete listing, see the SITRANS LR260 (PROFIBUS PA) Instruction Manual. For

Approvals information, please refer to the process device tag.

Ambient/Operating Temperature

Power

• Bus powered Per IEC 61158-2 (PROFIBUS PA)

• Current consumed 15.0 mA

Approvals

•General CSA

US/C, FM, CE

• Radio Europe (R&TTE), FCC, Industry Canada, C-TICK

• Hazardous CSA/FM Class II, Div. 1, Groups E, F, G, Class III

ATEX II 1D, 1/2D, 2D Ex tD A20 IP67, IP68 T100 deg C

SABS ARP0108 Ex ia IIC T4 Ga

INMETRO: DNV 12.0081 X

Ex tb IIIC T100 °C Db 

-40 ºC Ta +80 ºC

IP67/IP68

DNV #OCP 0017

ABNT NBR IEC 60079-0:2008 e

ABNT NBR IEC 60079-31:2011

Note: Process temperature and pressure capabilities are dependent upon information on

the process device tag. The reference drawing listed on the tag can be downloaded from the

Siemens website at: www.siemens.com/LR260

Note: Use appropriate conduit seals to maintain IP or NEMA rating.

process temperature (with FKM O-ring)

non-pressure version: –40 to +200 °C (–40 to +392 °F)

pressure rated version: –40 to +80 °C (–40 to +176 °F)

ambient temperature (surrounding

enclosure)

–40 °C to 80 °C (–40 °F to 176 °F)

Page EN-4 SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL A5E32114443

mmmmm

English

Pressure Application

Installation1

Installation guidelines

• Provide easy access for viewing the display and programming via the hand programmer.

• Provide an environment suitable to the housing rating and materials of construction.

• Provide a sunshield if the device will be mounted in direct sunlight.

Nozzle design

• The end of the horn must protrude a minimum of

10 mm (0.4”) to avoid false echoes being reflected

from the nozzle.

• Optional antenna extension: 100 mm (3.93"),

200 mm (70.9"), 500 mm (19.69"), 1000 mm (39.4")2

WARNINGS:

• This product is designated as a Pressure Accessory per Directive 97 / 23 / EC, and

is not intended for use as a safety device.

• Do not attempt to loosen, remove, or disassemble process connection or

instrument housing while vessel contents are under pressure.

• Improper installation may result in loss of process pressure.

WARNINGS:

• Installation shall only be performed by qualified personnel and in

accordance with local governing regulations.

• Materials of construction are chosen based on their chemical compatibility (or

inertness) for general purposes. For exposure to specific environments, check

with chemical compatibility charts before installing.

Notes:

• For European Union and member countries, installation must be according to ETSI EN

302372.

• The Process Device Tag shall remain with the process pressure boundary assembly1. In

the event the instrument package is replaced, the Process Device Tag shall be transferred

to the replacement unit.

• SITRANS LR260 units are hydrostatically tested, meeting or exceeding the requirements

of the ASME Boiler and Pressure Vessel Code and the European Pressure Equipment

Directive.

1. The process pressure boundary assembly comprises the components that act as a barrier against

pressure loss from the process vessel: that is, the combination of process connection body and

emitter, but normally excluding the electrical enclosure.

2. Extensions are not recommended for applications where there may be excessive visible vibration.

Please consult factory for more information.

min. clearance:

10 mm (0.4")

A5E32114443 SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL Page EN-5

mmmmm

English

Nozzle location

• Keep emission cone free of

interference from ladders, pipes,

I-beams or filling streams.

• Avoid central locations on tall,

narrow vessels.

• Align the antenna so that the

radar cone is perpendicular to the

surface of the monitored material,

if possible.

Mounting instructions

Wiring

Power

Note: Beam angle depends on horn

size.

WARNING: The user is responsible for the selection of bolting and gasket materials

which will fall within the limits of the flange and its intended use, and which are

suitable for the service conditions.

WARNINGS:

The DC input terminals shall be supplied from a source providing electrical

isolation between the input and output, meeting the applicable safety

requirements of IEC 61010-1.

All field wiring must have insulation suitable for rated voltages.

beam angle:

2" horn = 15°

3" horn = 10°

4" horn = 8°

emission

cone

min. 1 m (39")

Page EN-6 SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL A5E32114443

mmmmm

English

Connecting SITRANS LR260

1. Use a 2 mm Allen key to loosen the lid-lock set screw then using a screwdriver for

leverage if necessary, unscrew the cover.

2. Strip the cable jacket for approximately 70 mm (2.75") from the end of the cable, and

thread the wires through the gland1.

3. Connect the wires to the terminal as shown (SITRANS LR260 is not polarity sensitive)

4. Ground the device according to local regulations.

5. Tighten the gland to form a good seal.

6. Close the lid and secure the locking ring before programming and calibration..

WARNINGS:

• Check the device nameplate and process device tag, to verify the approval rating.

• Use appropriate conduit seals to maintain IP or NEMA rating.

•Read

Wiring setup for hazardous area installations

on page 7.

Note:

• For detailed wiring instructions refer to the full Instruction Manual.

• Use twisted pair cable: AWG 22 to 14 (0.34 mm² to 2.5 mm²).

• Separate cables and conduits may be required to conform to standard instrumentation

wiring practices, or electrical codes.

1. If cable is routed through conduit, use only approved suitable-size hubs for waterproof applications.

Notes:

• PROFIBUS PA must be terminated at both extreme ends of the cable for it to work

properly.

• Please refer to the

PROFIBUS PA User and Installation Guidelines

(order number 2.092),

available from www.profibus.com, for information on installing PROFIBUS devices.

2 mm lid-lock

set screw.

cable shield

(if used)

A5E32114443 SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL Page EN-7

mmmmm

English

Connecting PROFIBUS PA

Typical PLC connection with PROFIBUS PA

Wiring setup for hazardous area installations

The nameplates shown are typical examples. In all cases, check the nameplate on your

instrument, and confirm the approval rating.

Instructions specific to hazardous area installations

(Reference European ATEX Directive 94/9/EC, Annex II, 1.0.6)

The following instructions apply to equipment covered by certificate number

Sira07ATEX9256X:

1. For use and assembly and details of marking/coding, refer to the main instructions.

2. The equipment is certified for use as Category 1D, 1/2D and 2D equipment and may

be used in hazardous zones 20, 21 and 22 with dusts.

3. This equipment has a maximum surface temperature of T100 C (in an 80°C ambient).

Refer to the applicable code of practice for selection of this equipment with respect

to specific dust ignition temperatures.

Note: Installation shall be performed only by qualified personnel and in accordance

with local governing regulations.

PROFIBUS PA

PROFIBUS DP

DP/PA

coupler

active PLC

PC/laptop

PDM

SITRANS

LR260

(PROFIBUS PA)

SITRANS

LR260

(PROFIBUS PA)

SITRANS

LR260

(PROFIBUS PA)

Page EN-8 SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL A5E32114443

mmmmm

English

4. The equipment is certified for use in an ambient temperature range of -40 C to 80 C.

5. The equipment has not been assessed as a safety related device (as referred to by

Directive 94/9/EC Annex II, clause 1.5).

6. Installation and inspection of this equipment shall be carried out by suitably trained

and authorized personnel in accordance with the applicable code of practice.

7. The equipment shall be installed such that the supply cable is protected from

mechanical damage. The cable shall not be subjected to tension or torque. The

equipment manufacturer is not responsible for providing the supply cable.

8. Repair of this equipment shall be carried out by suitably trained and authorized

personnel in accordance with the applicable code of practice.

9. The equipment shall be supplied with an input voltage not exceeding 30 V DC. The

source shall provide electrical isolation between its input and output, meeting the

applicable safety requirements of IEC 61010-1.

SPECIAL CONDITIONS FOR SAFE USE

The 'X' suffix to the certificate number relates to the following special condition(s) for

safe use:

• Unused cable entries shall be fitted with blanking elements that can only be

removed with the aid of a tool.

• Any glands, conduit entry devices or blanking elements fitted to the equipment

shall be suitable for use in the presence of combustible dusts and certified as

such by a notified body; the installation of these devices shall not compromise

the IP6X rating of the equipment enclosure.

• For applications that use the purge facility, the user shall provide a means to

ensure that combustible dust from the hazardous area cannot enter the purge

supply in such a way as to compromise the area classification.

Programming SITRANS LR260

A Quick Start Wizard provides an easy step-by-step guide to help you configure the device for

a simple application.

•7-step

Quick Start Wizard via the handheld programmer

on page 13.

•4-step

Quick Start Wizard via SIMATIC PDM

on page 16.

Settings can be modified locally via the Local User Interface (see

Accessing parameters via

the handheld programmer

on page 10) or remotely via SIMATIC PDM. The Local User

Interface (LUI) consists of an LCD display and a handheld programmer.

Activating SITRANS LR260

Power up the device. SITRANS LR260 automatically starts up in Measurement mode. Press

Mode to toggle between Measurement and Program Mode.

Autres manuels pour SITRANS LR260

Table des matières

Langues :

Autres manuels Siemens Émetteur

Siemens

Siemens SITRANS P500 Manuel utilisateur

Siemens

Siemens SITRANS P MK II Series Manuel utilisateur

Siemens

Siemens SITRANS LR560 Guide de l'administrateur

Siemens

Siemens SITRANS LR560 Manuel utilisateur

Siemens

Siemens SITRANS P310 with HART Guide de l'administrateur

Siemens

Siemens SITRANS T3K PA 7NG3213 Manuel utilisateur

Siemens

Siemens SITRANS TW Manuel utilisateur

Siemens

Siemens SITRANS L Manuel utilisateur

Siemens

Siemens SITRANS P300 Manuel utilisateur

Siemens

Siemens SITRANS P500 Guide de l'administrateur

Siemens

Siemens SITRANS TH400 Manuel utilisateur

Siemens

Siemens SITRANS L Manuel utilisateur

Siemens

Siemens SITRANS L Series Manuel utilisateur

Siemens

Siemens SITRANS Probe LU240 Guide de l'administrateur

Siemens

Siemens SITRANS L Series Guide de l'administrateur

Siemens

Siemens SITRANS LU150 Manuel utilisateur

Siemens

Siemens SITRANS LR260 Guide de l'utilisateur

Siemens

Siemens sitrans lr 460 Manuel utilisateur

Siemens

Siemens 7ML5431 Manuel utilisateur

Siemens

Siemens Sitrans LR200 Manuel utilisateur

Siemens

Siemens SITRANS FCT030 Manuel utilisateur

Siemens

Siemens SITRANS F M MAG 5000 Manuel utilisateur

Siemens

Siemens SITRANS LR260 Manuel d'instructions

Siemens

Siemens SITRANS L Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur