Siemens SITRANS LR260 Manuel d'instructions

SITRANS

Radar Transmitters

SITRANS L 260 (HART)R

Quick Start Manual 12/2013

IQ300IX.fm Page 5 Tuesday, October 2, 2001 1:43 PM

A5E32106122 SITRANS LR260 (HART) – QUICK START MANUAL Page EN-1

mmmmm

English

SITRANS LR260 (HART) Quick Start Manual

This manual outlines the essential features and functions of the SITRANS LR260 (HART). We

strongly advise you to acquire the detailed version of the manual so you can use your device to

its fullest potential. The complete manual can be downloaded from the SITRANS LR260

product page of our web site at: www.siemens.com/LR260. The printed manual is available

from your local Siemens Milltronics representative.

Questions about the contents of this manual can be directed to:

Siemens Milltronics Process Instruments

1954 Technology Drive, P.O. Box 4225

Peterborough, Ontario, Canada, K9J 7B1

Email: [email protected]om

MILLTRONICS is a registered trademark of Siemens Milltronics Process Instruments.

Technical Support

Support is available 24 hours a day.

To find your local Siemens Automation Office address, phone number, and fax number, go to:

www.siemens.com/automation/partner:

• Click on the tab Contacts by Product then find your product group (+Process Automation

> +Process Instrumentation > +Level Measuring Instruments).

• Select the team Technical Support. Click on Next.

• Click on a continent, then a country, followed by a city. Click on Next.

For on-line technical support go to: www.siemens.com/automation/support-request

• Enter the device name (SITRANS LR260) or order number, then click on Search, and

select the appropriate product type. Click on Next.

• Enter a keyword describing your issue. Then either browse the relevant documentation,

or click on Next to email a description of your issue to Siemens Technical Support staff.

Siemens A&D Technical Support Center: phone +49 180 50 50 222

fax +49 180 50 50 223

Process Instruments 2013.

Disclaimer of Liability

We encourage users to purchase autho-

rized bound manuals, or to view elec-

tronic versions as designed and

authored by Siemens Milltronics Process

Instruments. Siemens Milltronics Pro-

cess Instruments will not be responsible

for the contents of partial or whole

reproductions of either bound or elec-

tronic versions.

While we have verified the contents of this manual

for agreement with the instrumentation described,

variations remain possible. Thus we cannot guar-

antee full agreement. The contents of this manual

are regularly reviewed and corrections are

included in subsequent editions. We welcome all

suggestions for improvement.

Technical data subject to change.

Page EN-2 SITRANS LR260 (HART) – QUICK START MANUAL A5E32106122

mmmmm

English

Safety Guidelines

Warning notices must be observed to ensure personal safety as well as that of others, and to

protect the product and the connected equipment. These warning notices are accompanied by

a clarification of the level of caution to be observed.1

FCC Conformity

US Installations only: Federal Communications Commission (FCC) rules

SITRANS LR260

SITRANS LR260 is a 2-wire 25 GHz pulse radar level transmitter for continuous monitoring of

solids and liquids in storage vessels including extreme levels of dust and high temperatures, to

a range of 30 m (98.4 ft).

The instrument consists of an electronic component coupled to a horn antenna with an

integral Easy Aimer and flange for quick and easy positioning. A dust cover or air purging are

available as options.

SITRANS LR260 supports HART communication protocol, and SIMATIC PDM software. Signals

are processed using Process Intelligence which has been field-proven in over 1,000,000

applications worldwide (ultrasonic and radar).

WARNING: relates to a caution symbol on the product, and means that failure to

observe the necessary precautions can result in death, serious injury, and/or

considerable material damage.

WARNING1: means that failure to observe the necessary precautions can result

in death, serious injury, and/or considerable material damage.

Note: means important information about the product or that part of the operating manual.

1. This symbol is used when there is no corresponding caution symbol on the product.

WARNING: Changes or modifications not expressly approved by Siemens

Milltronics could void the user’s authority to operate the equipment.

Notes:

• This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

• This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the Operating Instructions may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference to radio communications, in which case the user will

be required to correct the interference at his own expense.

WARNING: SITRANS LR260 is to be used only in the manner outlined in this manual,

otherwise protection provided by the equipment may be impaired.

A5E32106122 SITRANS LR260 (HART) – QUICK START MANUAL Page EN-3

mmmmm

English

Specifications

For a complete listing, see the SITRANS LR260 (HART) Operating Instructions. For Approvals

information, please refer to the device nameplate and the process device tag.

Ambient/Operating Temperature

Power

• Maximum 30 V DC • 4 to 20 mA

Approvals

•General CSA

US/C, FM, CE, C-TICK

• Radio Europe (R&TTE), FCC, Industry Canada

• Hazardous ATEX II 1G, 1/2D, 2D Ex ia IIC T4 Ga, Ex ta IIIC T100 °C Da

ATEX II 3G Ex nA IIC T4 Gc

IECEx SIR 11.0153X Ex ia IIC T4 Ga, Ex ta IIIC T100 °C Da

FM/CSA Class I, Div. 1, Groups A, B, C, D Class II, Div. 1,

Groups E, F, G, Class III T4

FM/CSA Class I, Div. 2, Groups A, B, C, D T5

SABS ARP0108 Ex ia IIC T4 Ga

INMETRO:DNV 12.0081 X

Ex ia IIC T4 Ga

Ex ta IIIC T100 °C Da

-40 ºC Ta +80 ºC

IP67/IP68

DNV #OCP 0017

ABNT NBR IEC 60079-0:2008

ABNT NBR IEC 60079-11:2009

ABNT NBR IEC 60079-26:2008 e

ABNT NBR IEC 60079-31:2011

Notes:

• Process temperature and pressure capabilities are dependent upon information on the

process device tag. The reference drawing listed on the tag can be downloaded from the

Siemens website at: www.siemens.com/LR260.

• See

Loop power

on page 19, for more details.

Nominal 24 V DC with max. 550 Ohm loop resistance. (Check the device

nameplate for the characteristics of the device, and confirm the loop load.)

Note: Use appropriate conduit seals to maintain IP or NEMA rating.

ambient temperature

–40 °C to +80 °C (–40 °F to +176 °F)

process temperature (with FKM O-ring)

non-pressure version: –40 to +200 °C (–40 to +392 °F)

pressure rated version: –40 to +80 °C (–40 to +176 °F)

Page EN-4 SITRANS LR260 (HART) – QUICK START MANUAL A5E32106122

mmmmm

English

Pressure Application

Installation

WARNINGS:

• This product is designated as a Pressure Accessory per Directive 97 / 23 / EC, and

is not intended for use as a safety device.

• Do not attempt to loosen, remove, or disassemble process connection or

instrument housing while vessel contents are under pressure.

• Improper installation may result in loss of process pressure.

1. The process pressure boundary assembly comprises the components that act as a barrier against

pressure loss from the process vessel: that is, the combination of process connection body and

emitter, but normally excluding the electrical enclosure.

WARNINGS:

• Installation shall only be performed by qualified personnel and in

accordance with local governing regulations.

• Materials of construction are chosen based on their chemical compatibility (or

inertness) for general purposes. For exposure to specific environments, check

with chemical compatibility charts before installing.

Notes:

• For European Union and member countries, installation must be according to ETSI EN

302372.

• The Process Device Tag shall remain with the process pressure boundary assembly1. In

the event the device package is replaced, the Process Device Tag shall be transferred to

the replacement unit.

• SITRANS LR260 units are hydrostatically tested, meeting or exceeding the requirements

of the ASME Boiler and Pressure Vessel Code and the European Pressure Equipment

Directive.

A5E32106122 SITRANS LR260 (HART) – QUICK START MANUAL Page EN-5

mmmmm

English

Installation guidelines

• Provide easy access for viewing the display and programming via the hand programmer.

• Provide an environment suitable to the housing rating and materials of construction.

• Provide a sunshield if the device will be mounted in direct sunlight.

Nozzle design

• The end of the horn must protrude a minimum of

10 mm (0.4”) to avoid false echoes being reflected

from the nozzle.

• Optional antenna extensions: 100 mm (3.93"),

200 mm (70.9"), 500 mm (19.69"), 1000 mm (39.4")1

Nozzle location

• Keep emission cone free of

interference from ladders, pipes,

I-beams or filling streams.

• Avoid central locations on tall,

narrow vessels.

• Align the antenna so that the

radar cone is perpendicular to the

surface of the monitored material,

if possible.

Mounting instructions

1. Extensions are not recommended for applications where there may be excessive visible vibration. Please consult

factory for more information.

Note: Beam angle depends on horn

size.

WARNING: The user is responsible for the selection of bolting and gasket materials

which will fall within the limits of the flange and its intended use, and which are

suitable for the service conditions.

min. clearance:

10 mm (0.4")

beam angle:

2" horn = 15°

3" horn = 10°

4" horn = 8°

emission

cone

min. 1 m (39")

Page EN-6 SITRANS LR260 (HART) – QUICK START MANUAL A5E32106122

mmmmm

English

Wiring

Power

Connecting SITRANS LR260

1. Use a 2 mm Allen key to loosen the lid-lock set screw. Then using a screwdriver for

leverage if necessary, unscrew the cover.

2. Strip the cable jacket for approximately 70 mm (2.75") from the end of the cable, and

thread the wires through the gland.

3. Connect the wires to the terminals as shown: the polarity is identified on the terminal

block.

4. Ground the instrument according to local regulations.

5. Tighten the gland to form a good seal.

WARNINGS:

The DC input terminals shall be supplied from a source providing electrical

isolation between the input and output, meeting the applicable safety

requirements of IEC 61010-1.

All field wiring must have insulation suitable for rated voltages.

WARNINGS:

• Check the device nameplate and process device tag, to verify the approval rating.

• Use appropriate conduit seals to maintain IP or NEMA rating.

• Read

Instructions specific to hazardous area installations

on page 9.

Notes:

• For detailed wiring instructions, please refer to the full Operating Instructions.

• Use twisted pair cable: AWG 22 to 14 (0.34 mm² to 2.5 mm²).

• Separate cables and conduits may be required to conform to standard instrumentation

wiring practices, or electrical codes.

2 mm lid-lock

set screw.

cable shield

(if used)

A5E32106122 SITRANS LR260 (HART) – QUICK START MANUAL Page EN-7

mmmmm

English

Connecting HART

Typical PLC/mA configuration with HART

Wiring setups for hazardous area installations

1. Intrinsically Safe wiring

• For power demands see

Loop Voltage versus Loop Resistance

on page 19.

• For wiring requirements: follow local regulations.

• Approved dust-tight and water-tight conduit seals are required for outdoor NEMA 4X /

type 4X / NEMA 6, IP67, IP68 locations.

• Refer to

Instructions specific to hazardous area installations

on page 9.

active PLC

HART modem

SITRANS LR260

power

supply

Notes:

• Depending on the system

design, the power supply may

be separate from the PLC, or

integral to it.

• Loop resistance (total of cable

resistance plus 250 Ohm

[resistor]) must be less than

550 Ohm for the device to

function properly.

R= 250 

HART

communicator

SITRANS LR260

Siemens Milltronics Process Instruments, Peterborough

7MLxxxx-xxxxx-xxxx-

Encl.: NEMA / TYPE 4X, 6, IP67, IP68

Amb.Temp.: – 40°C to 80°C

Power Rating: 24 V Max.,4-20mA

Nom., 30 V

Serial No: GYZ / S1034567

HART

Ui=30V

Ii = 120 mA

Pi = 0.8 W

Ci=15nF

Li = 0.1 mH

0518

0891

BOX 1

Assembled in Canada with domestic and imported parts

KCC-REM-S49

SITRANSLR

1/2 DII1GD, ,2D

Ex ia IIC T4 Ga

Ex ta IIIC T100°C Da

SIRA 11ATEX2348X

IECEx SIR 11.0153x

ARP0108 Ex ia IIC T4 Ga

WARNING: Use Cable Rated >100°C

ATENÇÃO - RISCO POTENCIAL DE CARGA ELETROSTÁTICA – VEJA INSTRUÇÕES

- UTILIZAR CABOS ADEQUADOS PARA TEMPERATURAS >100 °C

Ex ia IIC T4 Ga

Ex ta IIIC T 100°C Da

DNV 12.0081 X

OCP 0017

The ATEX certificate listed on the nameplate

can be downloaded from the product page of our website at: www.siemens.com/LR260. Go

to Support > Approvals / Certificates.

The IECEx certificate listed on the nameplate can be viewed on the IECEx website. Go to:

http://iecex.iec.ch and click on Ex Equipment Certificates of Conformity then enter the

certificate number IECEx SIR 11.0153X.

Device nameplate (ATEX/IECEX/INMETRO/C-TICK)

FM/CSA Intrinsically Safe connection drawing number A5E03745229 can be downloaded

from the product page of our website at: www.siemens.com/LR260. Go to Support >

Installation Drawings > Level Measurement > Continuous - Radar.

Device nameplate (FM/CSA)

Page EN-8 SITRANS LR260 (HART) – QUICK START MANUAL A5E32106122

mmmmm

English

2. Non-Sparking wiring

• For power demands see

Loop Voltage versus Loop Resistance

on page 19.

• For wiring requirements: follow local regulations.

• Refer to

Instructions specific to hazardous area installations

on page 9.

3. Non-incendive wiring (US/Canada only)

• For power demands see

Loop Voltage versus Loop Resistance

on page 19.

Assembled in Canada with domestic and imported parts

Siemens Milltronics Process Instruments, Peterborough

HART

WARNING: Use Cable Rated > 100°C

Ex nA IIC T4 Gc

SIRA 09ATEX4155X

0891

SITRANS LR260

7MLxxxx-xxxxx-xxxx

Serial No.: GYZ / B1034567

Encl.: NEMA / TYPE 4X, 6, IP67, IP68

Amb. Temp.: – 40°C to 80°C

Power Rating: 24 V Nom., 30 V Max.,

4–20mA

KCC-REM-S49

SITRANSLR

The ATEX certificate listed on the nameplate

can be downloaded from the product page of our website at: www.siemens.com/LR260. Go to

Support > Approvals / Certificates.

FM/CSA Class 1, Div 2 connection drawing number A5E03745541

can be downloaded from the product page of our website at: www.siemens.com/LR260. Go to

Support > Installation Drawings > Level Measurement > Continuous - Radar.

Autres manuels pour SITRANS LR260

Table des matières

Langues :

Autres manuels Siemens Émetteur

Siemens

Siemens SITRANS Series Manuel utilisateur

Siemens

Siemens RPT Manuel utilisateur

Siemens

Siemens SITRANS L Series Guide de l'administrateur

Siemens

Siemens SINAMICS G120 Manuel utilisateur

Siemens

Siemens 7ml12011ef00 Manuel utilisateur

Siemens

Siemens sitrans PROBE LU Manuel d'instructions

Siemens

Siemens SITRANS LR560 Guide de l'administrateur

Siemens

Siemens SITRANS P500 Guide de l'administrateur

Siemens

Siemens 5WG3-425-7AB21 Manuel utilisateur

Siemens

Siemens SITRANS P310 with HART Guide de l'administrateur

Siemens

Siemens SITRANS FCT030 Manuel utilisateur

Siemens

Siemens SITRANS F C MASSFLO MASS 6000 Manuel utilisateur

Siemens

Siemens SITRANS LR140 Manuel utilisateur

Siemens

Siemens SITRANS LR25 Manuel d'instructions

Siemens

Siemens 5WK4 9046 Manuel utilisateur

Siemens

Siemens sitrans lc 300 Manuel utilisateur

Siemens

Siemens SITRANS F Manuel utilisateur

Siemens

Siemens SITRANS L Series Guide de l'administrateur

Siemens

Siemens 7MF4033 series Manuel utilisateur

Siemens

Siemens sitrans PROBE LU Manuel utilisateur

Siemens

Siemens 7MF8*23 Series Guide de l'administrateur

Siemens

Siemens THE PROBE Manuel utilisateur

Siemens

Siemens SITRANS FUS060 PA Manuel utilisateur

Siemens

Siemens SITRANS L Series Guide de l'administrateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur