Siemens Sitrans LR200 Manuel d'instructions

Quick Start Manual September 2005

LR 200 (PROFIBUS PA)

sitrans

SITRANS LR 200 5.8GHz

EExiaIICT4

03ATEX2142X

II 1G

SIRA

Made in Canada

Siemens Milltronics Process Instruments Inc., Peterborough

WARNING:POSSIBLE STATIC HAZARD, DO NOT RUB OR CLEAN ON SITE.

Fisco:

Exiaperdrawing:23650529

Ui=17.5 V,

Pi=5.32W,

i=380 mA,

PROFIBUSPA

Li=0

Ci=0,

Entity:

Ui=24 V,

Pi=1.2W,

i=250 mA,

Li=0

Ci=0,

7ML5423-56789-0ABC-D

Encl.: NEMA/ TYPE 4X, 6, IP68

Amb.Temp.: – 40 °C to 80 °C

Power Rating: 30V Max., 10.5 mA

Serial No: GYZ / S1034567

7ML19985QG81 SITRANS LR 200 (PROFIBUS PA) – QUICK START MANUAL Page EN-1

mmmmm

English

SITRANS LR 200 (PROFIBUS PA) Quick Start

Manual

This manual outlines the essential features and functions of the SITRANS LR 200 (PROFIBUS PA).

We strongly advise you to acquire the detailed version of the manual so you can use your

instrument to its fullest potential. The complete manual can be downloaded from the Siemens

Milltronics website at: https://pia.khe.siemens.com/index.asp?Nr=7427. The printed manual is

available from your local Siemens Milltronics representative.

Questions about the contents of this manual can be directed to:

Siemens Milltronics Process Instruments Inc.

1954 Technology Drive, P.O. Box 4225

Peterborough, Ontario, Canada, K9J 7B1

Email: techpubs.smpi@siemens.com

MILLTRONICS is a registered trademark of Siemens Milltronics Process Instruments Inc.

Safety Guidelines

Warning notices must be observed to ensure personal safety as well as that of others, and to

protect the product and the connected equipment. These warning notices are accompanied by

a clarification of the level of caution to be observed.

Process Instruments Inc. 2005.

All RightsReserved Disclaimer of Liability

We encourage users to purchase

authorized bound manuals, or to view

electronic versions as designed and

authored by Siemens Milltronics Process

Instruments Inc. Siemens Milltronics

Process Instruments Inc. will not be

responsible for the contents of partial or

whole reproductions of either bound or

electronic versions.

While we have verified the contents of this manual

for agreement with the instrumentation described,

variations remain possible. Thus we cannot

guarantee full agreement. The contents of this

manual are regularly reviewed and corrections are

included in subsequent editions. We welcome all

suggestions for improvement.

Technical data subject to change.

WARNING: relates to a caution symbol on the product,and means that

failuretoobservethenecessaryprecautionscanresultindeath,serious

injury, and/or considerable material damage.

WARNING: meansthat failureto observethenecessary precautionscan

result in death, serious injury, and/or considerable material damage.

CAUTION: means that failure to observe the necessary precautions can result

in considerable material damage.

Note: means important information about the product or that part of the operating manual.

Page EN-2 SITRANS LR 200 (PROFIBUS PA) – QUICK START MANUAL 7ML19985QG81

mmmmm

English

SITRANS LR 200

SITRANS LR 200 is a 2-wire loop-powered, continuous level measuring instrument that utilizes

advanced pulse radar technology at 5.8 GHz (6.3 GHz in North America). The instrument

consists of an electronic component coupled to the antenna and process connection.

Communication is via PROFIBUS PA, and signals are processed using Sonic Intelligence®.

Specifications

For a complete listing, see the SITRANS LR 200 (PROFIBUS PA) Instruction Manual. For

Approvals information, please refer to the process device tag.1

Ambient/Operating Temperature

WARNING: SITRANS LR 200 is to be used only in the manner outlined in this

manual, otherwise protection provided by the equipment may be impaired.

Notes:

• This product is designated as a Pressure Accessory per Directive 97 / 23 / EC, and is not

intended for use as a safety device.

• This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which case the

user will be required to correct the interference at his own expense..

1. When the locking ring is secured, it prevents the enclosure rotating on the threaded connection.

Note: Process temperature and pressure capabilities are dependent upon information

on the process device tag. The reference drawing listed on the tag can be downloaded

from the Siemens Milltronics website at:

https://pia.khe.siemens.com/index.asp?Nr=7427.

process temperature

–40

C to 80

C (–40

F to 176

ambient temperature

(surrounding enclosure)

–40

C to 80

C (–40

F to 176

process device

tag

nameplate

customer-supplied

flange

locking ring

over threaded connection;

secured by three 2 mm Allen set-screws

hand programmer

7ML19985QG81 SITRANS LR 200 (PROFIBUS PA) – QUICK START MANUAL Page EN-3

mmmmm

English

Power

• Bus powered On PROFIBUS PA, as per IEC 61158-2.

• Current consumed 10.5 mA (General Purpose or Intrinsically Safe version)

Approvals

• General CSAUS/C, FM, CE

• Radio Europe: R&TTE

US: FCC

Canada: Industry Canada

• Hazardous Europe ATEX II 1 G EEx ia IIC T4

US FM: Intrinsically Safe (barrier required)1

Class I, Div. 1, Groups A, B, C, D

Class II, Div. 1, Groups E, F, G

Class III

FM: Non-incendive (no barrier required)1

Class I, Div. 2, Groups A, B, C, D, T5

Canada CSA: Intrinsically Safe (barrier required)1

Class I, Div. 1, Groups A, B, C, D (barrier required)

Class II, Div. 1, Group G

Class III

Pressure Application

1. Please see

Appendix A

. For more details, please see the full manual.

Note: The use of approved watertight conduit hubs/glands is required for Type 4X /

NEMA 4X, Type 6 / NEMA 6, IP67 (outdoor applications).

WARNINGS:

• Thisproductisdesignated as aPressureAccessory perDirective97 / 23/ EC,and

isnot intended for use as a safety device.

•Donot

attempt to loosen, remove, or disassemble process connection or

instrument housing while vessel contents are under pressure.

• Improper installation may result in loss of process pressure.

Page EN-4 SITRANS LR 200 (PROFIBUS PA) – QUICK START MANUAL 7ML19985QG81

mmmmm

English

Installation

Mounting location

Recommendations

• Easy access for viewing the display and programming via the hand programmer.

• An environment suitable to the housing rating and materials of construction.

Precautions

• Avoid proximity to high voltage or current wiring, high voltage or current contacts, and to

variable frequency motor speed controllers.

WARNINGS:

• Materialsofconstructionare chosenbasedontheirchemicalcompatibility

(or inertness) for general purposes. For exposure to specific environments,

check with chemical compatibility charts before installing.

• The user is responsible for the selection of bolting and gasket materials

which will fall within the limits of the flange and its intended use, and

which are suitable for the service conditions.

• Installation shall only be performed by qualified personnel and in

accordance with local governing regulations.

• Please handle the device using the enclosure, not the antenna, to avoid

damage.

Coni

Fl at

beam angle:

(defined at –3 dB

boundary)

4" horn

12o

30o

6" horn

8" horn

20o

beam

angle

20o

rod antenna

(defined at

–3 dB

boundary)

min. 300 mm (1 ft) for every

3 m (10 ft) of vessel height

• Locate the antenna away from the side wall,

to avoid interference from indirect echoes.

• Avoid interference from objects such as

ladders or pipes, which can cause false

reflections.

• Avoid interference from the fill path.

Flat ParabolicConical

preferred undesirable

• Avoid central locations on vessels.

horn antenna

7ML19985QG81 SITRANS LR 200 (PROFIBUS PA) – QUICK START MANUAL Page EN-5

mmmmm

English

Mounting instructions

• Simply screw SITRANS LR 200 into the process connection, and hand tighten.

The maximum torque is 40 N-m (30 ft-lbs).

Rod Assembly (PTFE rod antenna version only)

WARNING: For pressure applications, it is necessary to use PTFE paste (or

other appropriate thread-sealing compound) and tighten the process

connection beyond hand tight.

minimum

100 mm (4")

minimum

10 mm (0.4")

To provide optimum signal conditions on a manhole cover, locate the antenna off-center

relative to the cover, typically 100 mm (4”) from the side of the manhole.

• Use the 100 mm (4") shield on nozzles that are 100 mm (4") in length, or shorter.

• Use the 250 mm (10") shield on nozzles that are 250 mm (10") in length, or shorter.

50 mm (2”)

PTFE paste is supplied with

PTFE rod antenna versions

(non-sanitary type).

Optional

Extension 100 mm (4")

Notes:

• Water or process fluids must not enter the

connecting threads: this could cause reflections

at the connection, which will appear as false

echoes.

• Apply a small amount of PTFE paste to the

antenna threads before threading the antenna

together, and tighten slowly. Ensure that the rod

sections mate securely with no gaps. Do not

apply too much PTFE paste or the parts will not

mate securely.

• Do not use wrenches or pliers. Hand tighten only

(except in pressure applications: see warning

above).

Page EN-6 SITRANS LR 200 (PROFIBUS PA) – QUICK START MANUAL 7ML19985QG81

mmmmm

English

Wiring

Power1

Connecting SITRANS LR 200 (PROFIBUS PA)2

WARNINGS:

DC terminals shall be supplied froman SELV 1source in accordance

with IEC-1010-1 Annex H.

All field wiring must have insulation suitable forrated voltages.

1. Safety Extra Low Voltage

Note: For detailed wiring instructions, please see the full manual.

2. For general purpose applications:

- ground the shield at one point only and continue the shield from device to device.

For Intrinsically Safe applications:

- ground the shield at each device, and use an equal-potential grounding grid.

For more detail on Explosion Protection, you can download the brochure

Siemens Process Automation

ExplosionProtection

(partnumber A5E00265440) fromhttps://pia.khe.siemens.com/index.asp?Nr=4236.

Note: PROFIBUS PA MUST be terminated at both extreme ends of the cable for it to work

properly. Please refer to the PROFIBUS PA User and Installation Guidelines (order number

2.092), available from www.profibus.com

2 mm lid-lock set

screw.

1. If you want to rotate the instrument on the process

connection, use the 2 mm Allen key provided to loosen

the locking ring (see illustration on page 2).

3 Use the Allen key to loosen the lid-lock set screw.

Using a screwdriver for leverage if necessary, unscrew the cover.

4. Connect the wires to the terminal as shown: the polarity is identified on the terminal

block.

5. Ground the instrument according to local regulations.

6. Ground the shield according to PROFIBUS PA guidelines.

7. Close the lid and secure the locking ring before programming and calibration. Do not

rotate the instrument after calibration, as this may cause an error.

7ML19985QG81 SITRANS LR 200 (PROFIBUS PA) – QUICK START MANUAL Page EN-7

mmmmm

English

Communications via PROFIBUS PA

Configuring the PROFIBUS PA master

To configure SITRANS LR 200 on the network, you will need the GSD file SIEM810F.gsd. You

can download the file from our web site. Go to the SITRANS LR 200 product page at:

https://pia.khe.siemens.com/index.asp?Nr=7427 and click Downloads.

Startup

SITRANS LR 200 automatically starts up in RUN mode, and detects the material level. The LCD

displays the material level (in percent) referenced from the Low Level Point1(the output of

Analog Input Function Block1/AIFB1). System status is displayed on the LCD, or on a remote

communications terminal.

Startup Display (RUN mode)2

Notes:

• The following instructions assume that the user is familiar with PROFIBUS PA.

• For a complete list of applicable parameters, please see the full manual.

1. See

Quick Setup

on page 12 for an illustration.

2. Please see the full manual for more details on Loss of Echo.

Normal operation

1 – Primary region displays material level (Output of the active AIFB)

2 – Menu number (displays the number of the active AIFB: 1 or 2)

3 – Echo status indicator: Reliable Echo or Unreliable Echo

(The Unreliable Echo border flashes if Loss of Echo (LOE) is pending2. When LOE becomes

active, the border is solid and the secondary region displays S :0.)

4 – Bar graph border (always visible in RUN mode)

5 – Units or Percent

6 – Active bar graph represents material level

(The lowest bar flashes once per second as a heartbeat.)

7 – Secondary region displays one of the following:

• internal electronics temperature

• value representing echo confidence, with units where applicable

• fault code (see the full manual for a list of fault codes and their meanings)

Failsafe operation

Page EN-8 SITRANS LR 200 (PROFIBUS PA) – QUICK START MANUAL 7ML19985QG81

mmmmm

English

Programming SITRANS LR 200 (PROFIBUS PA)

The parameters that control the operation of the LR 200 (PROFIBUS PA) are organized into

function groups, and arranged in a 4-level menu structure that can be accessed either via the

hand programmer, or via PDM and PROFIBUS PA. (For charts showing the complete menu

structure, please see the full manual.)

The hand programmer1

To activate PROGRAM mode, point the hand programmer at the display (from a maximum

distance of 600 mm/2 ft), and press the Mode key .

The hand programmer has two modes of operation:

1. Navigation Mode

• in this mode, the rightmost digit of the menu number flashes (the PROGRAM icon

is not visible)

• up/down arrows change the mode number

• pressing the right/left arrows once moves to the next/previous menu

• pressing the right arrow a second time changes the mode from Navigation to Edit

mode

2. Edit Mode

• in this mode, the PROGRAM icon appears and flashes

• pressing the number keys enters parameter data

• only parameter items can be in edit mode

• in the case of read-only parameters, no change is permitted

1. For complete instructions on local programming using the hand programmer, please see the full

manual.

display

hand-held programmer

max. 600 mm

(2 ft)

7 8

1 2 3 4

numeric keys

function

keys

Autres manuels pour Sitrans LR200

Table des matières

Langues :

Autres manuels Siemens Émetteur

Siemens

Siemens SITRANS F M MAG 5000 Manuel utilisateur

Siemens

Siemens SITRANS LR260 Guide de l'utilisateur

Siemens

Siemens SITRANS P320 Guide de l'administrateur

Siemens

Siemens SITRANS LR560 Manuel utilisateur

Siemens

Siemens THE PROBE Manuel utilisateur

Siemens

Siemens SITRANS F C MASS 6000 IP67 Manuel utilisateur

Siemens

Siemens SITRANS LR260 Manuel utilisateur

Siemens

Siemens SITRANS P DS III Manuel utilisateur

Siemens

Siemens SITRANS LR260 Manuel utilisateur

Siemens

Siemens SITRANS P series Manuel utilisateur

Siemens

Siemens SITRANS L Series Manuel utilisateur

Siemens

Siemens SITRANS L Series Manuel utilisateur

Siemens

Siemens SITRANS 7MF1570 Manuel utilisateur

Siemens

Siemens SITRANS Series Manuel utilisateur

Siemens

Siemens SITRANS P DS III Manuel utilisateur

Siemens

Siemens SITRANS LR560 Manuel utilisateur

Siemens

Siemens SITRANS T3K PA 7NG3213 Manuel utilisateur

Siemens

Siemens Sitrans LR200 Manuel d'instructions

Siemens

Siemens SITRANS TH400 Manuel utilisateur

Siemens

Siemens SITRANS LR260 Manuel utilisateur

Siemens

Siemens SITRANS F Manuel utilisateur

Siemens

Siemens SITRANS T Series Guide de l'administrateur

Siemens

Siemens SITRANS P series Guide de l'administrateur

Siemens

Siemens SITRANS L Series Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur