Siemens SIMATIC ET 200AL Manuel utilisateur

IO-Link digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BL0)

SIMATIC

ET 200AL

-Link digital output module

DQ 8x24VDC/2A 8xM12

(6ES7142-5AF00-0BL0)

Equipment Manual

08/2021

A5E47926730

-AB

Preface

ET 200AL IO-Link I/O

modules Documentation

Guide

Product overview

Wiring

Parameters/address space

Interrupts/diagnostic

alarms

Technical specifications

Dimension drawing

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E47926730-AB

Ⓟ

08/2021 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

IO-Link digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BL0)

Equipment Manual, 08/2021, A5E47926730-AB 3

Preface

Preface IO-Link module AL

Purpose of the documentation

This manual supplements the system manual ET 200AL IO-Link

(https://support.automation.siemens.com/WW/view/en/109773203). Functions that generally

relate to the distributed I/O system ET 200AL IO-Link I/O modules are described there.

The information provided in this manual and in the system manual and function manuals

supports you in commissioning the ET 200AL IO-Link I/O modules.

Changes compared to the previous version

This manual contains the following changes compared to the previous version:

•Supplements in the section Parameters (Page 15).

•Update of the section Technical specifications (Page 20)

Conventions

Also observe notes labeled as follows:

Note

Indicates important product information to which particular attention should be paid.

Preface

IO-Link digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BL0)

4Equipment Manual, 08/2021, A5E47926730-AB

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation)

are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure to

cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed visit (https://www.siemens.com/industrialsecurity).

IO-Link digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BL0)

Equipment Manual, 08/2021, A5E47926730-AB 5

Table of contents

Preface ................................................................................................................................................... 3

1 ET 200AL IO-Link I/O modules Documentation Guide ........................................................................... 6

2 Product overview................................................................................................................................... 9

2.1 Properties............................................................................................................................ 9

2.2 Operator controls and display elements.............................................................................. 11

3 Wiring .................................................................................................................................................. 12

3.1 Terminal and block diagram............................................................................................... 12

3.2 Pin assignment .................................................................................................................. 13

4 Parameters/address space ................................................................................................................... 15

4.1 Parameters ........................................................................................................................ 15

4.2 Explanation of the parameters ........................................................................................... 15

4.3 Address space.................................................................................................................... 16

4.4 IODD parameters ............................................................................................................... 16

5 Interrupts/diagnostic alarms ............................................................................................................... 17

5.1 Status and error displays.................................................................................................... 17

5.2 Interrupts .......................................................................................................................... 19

5.3 Diagnostics alarms............................................................................................................. 19

6 Technical specifications....................................................................................................................... 20

A Dimension drawing ............................................................................................................................. 24

IO-Link digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BL0)

6Equipment Manual, 08/2021, A5E47926730-AB

ET 200AL IO-Link I/O modules Documentation

Guide

The documentation for the SIMATIC ET 200AL IO-Link I/O modules is arranged into three

areas.

This arrangement enables you to access the specific content you require.

Basic information

The system manual describes in detail the configuration, installation, wiring and

commissioning of the distributed I/O system SIMATIC ET 200AL IO-Link I/O modules.

Device information

Equipment manuals contain a compact description of the module-specific information, such

as properties, wiring diagrams, characteristics and technical specifications.

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

IO-Link system.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109742667).

ET 200AL Manual Collection

The Manual Collection contains the complete documentation on the SIMATIC ET 200AL

distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(https://support.automation.siemens.com/WW/view/en/95242965).

ET 200AL IO-Link I/O modules Documentation Guide

IO-Link digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BL0)

Equipment Manual, 08/2021, A5E47926730-AB 7

"mySupport"

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet (https://support.industry.siemens.com/My/ww/en).

"mySupport" - Documentation

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet

(https://support.industry.siemens.com/My/ww/en/documentation).

"mySupport" - CAx data

In the CAx data area of "mySupport", you can access the latest product data for your CAx or

CAe system.

You configure your own download package with a few clicks.

You can select:

•Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN

macro files

•Manuals, characteristics, operating manuals, certificates

•Product master data

You can find "mySupport" CAx data on the Internet

(https://support.industry.siemens.com/my/ww/en/CAxOnline).

Application examples

The application examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus on individual products.

You will find the application examples on the Internet

(https://support.industry.siemens.com/cs/ww/en/ps/ae).

ET 200AL IO-Link I/O modules Documentation Guide

IO-Link digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BL0)

8Equipment Manual, 08/2021, A5E47926730-AB

TIA Selection Tool

With the TIA Selection Tool, you can select, configure and order devices for Totally Integrated

Automation (TIA).

This tool is the successor of the SIMATIC Selection Tool and combines the known

configurators for automation technology into one tool.

With the TIA Selection Tool, you can generate a complete order list from your product

selection or product configuration.

You can find the TIA Selection Tool on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109767888).

PRONETA

SIEMENS PRONETA (PROFINET network analysis) allows you to analyze the plant network

during commissioning. PRONETA has two core functions:

•The topology overview automatically scans the PROFINET and all connected components.

•The IO check is a fast test of the wiring and the module configuration of a plant.

You can find SIEMENS PRONETA on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/67460624).

SIMATIC S7-PCT

The Port Configuration Tool ("PCT") is PC-based software for the parameter assignment of

Siemens IO-Link master-modules and IO-Link devices from any manufacturer.

The IO-Link devices are integrated using the standardized device description "IODD" that is

available from the respective device manufacturer. S7-PCT supports the version 1.0 as well as

V1.1 of the IODD.

S7-PCT is called via the hardware configuration of the IO-Link masters from STEP 7; however,

it can also be started as "standalone" if the IO-Link master is not operated on a SIMATIC

controller or when STEP 7 is not used.

You can find additional information on IO-Link on the Internet

(https://new.siemens.com/global/en/products/automation/industrial-communication/io-

link.html).

IO-Link digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BL0)

Equipment Manual, 08/2021, A5E47926730-AB 9

Product overview

2.1 Properties

Article number

6ES7142-5AF00-0BL0

View of the module

Figure 2-1 View of the DQ 8x24VDC/2A 8xM12 IO-Link digital output module

Autres manuels pour SIMATIC ET 200AL

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Siemens Unité de contrôle

Siemens

Siemens SINUMERIK 840C Manuel

Siemens

Siemens SINUMERIK 840D sl Feuille d'instructions

Siemens

Siemens MXG461B Series Manuel du propriétaire

Siemens

Siemens FCM-6S Manuel utilisateur

Siemens

Siemens SIMOCODE pro Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens SINAMICS G120 Manuel utilisateur

Siemens

Siemens SIMATIC TDC Guide de l'utilisateur

Siemens

Siemens SIRIUS 3RA2711-DB0 Series Manuel utilisateur

Siemens

Siemens VAI61 Series Manuel utilisateur

Siemens

Siemens SIRIUS 3RW5 series Document technique

Siemens

Siemens SINAMICS S120 Guide de démarrage rapide

Siemens

Siemens IONPURE VNX50HH-2 Manuel

Siemens

Siemens Siwarex U Guide d'application

Siemens

Siemens FN2013-U1 Manuel utilisateur

Siemens

Siemens 6EP1935-6MC01 Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens SENTRON PAC PROFIBUS DP Manuel utilisateur

Siemens

Siemens SIMATIC NET CP 343-2 Manuel utilisateur

Siemens

Siemens 986-88301A Manuel utilisateur

Siemens

Siemens VGD20.253U Manuel du propriétaire

Siemens

Siemens SIMOCODE pro Manuel utilisateur

Siemens

Siemens LMV3 series Manuel du propriétaire

Siemens

Siemens SIMOCODE DP Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur