Siemens FN2006-U1 Mode d’emploi
A6V10315048_b_en_US Siemens Industry, Inc.
01/13/2012 Building Technologies Division
FN2006-U1, FN2007-U1
Fiber network module (SM),
Fiber network module (MM)
Mounting
Installation
MP-UL 1.0
Legal notice
2
Siemens Industry, Inc. A6V10315048_b_en_US
Building Technologies Division 01/13/2012
Legal notice
Technical specifications and availability subject to change without notice.
© 2011 Copyright by Siemens Industry, Inc.
Transmittal, reproduction, dissemination and/or editing of this document as well as
utilization of its contents and communication thereof to others without express
authorization are prohibited. Offenders will be held liable for payment of damages. All
rights created by patent grant or registration of a utility model or design patent are
reserved.
Issued by:
Siemens Industry, Inc.
Building Technologies Division
8 Fernwood Road
Florham Park, NJ 07932
Tel. +1 973-593-2600
www.sbt.siemens.com/FIS
Edition: 01/13/2012
Document ID: A6V10315048_b_en_US
3
Siemens Industry, Inc. A6V10315048_b_en_US
Building Technologies Division 01/13/2012
Table of contents
1Fiber network module FN2006 / FN2007..........................................................4
1.1 Description ...........................................................................................................4
1.2 Installation............................................................................................................5
1.3 Views....................................................................................................................6
1.4 Pin assignments...................................................................................................7
1.4.1 Wiring....................................................................................................7
1.4.2 Power supply sockets (4, 6)................................................................11
1.4.3 Sockets for FCnet/C-WEB circuits (7, 8) ............................................12
1.5 Indicators............................................................................................................13
1.6 Technical data....................................................................................................14
2FCC Statement..................................................................................................15
Fiber network module FN2006 / FN2007
1 Description
4
Siemens Industry, Inc. A6V10315048_b_en_US
Building Technologies Division 01/13/2012
1Fiber network module FN2006 / FN2007
1.1 Description
The fiber network module multi-mode (MM) and the fiber network module single-mode
(SM) can be used to network fire detection panels to the system bus
FCnet/SAFEDLINK or C-WEB/SAFEDLINK over large distances using glass fiber optic
cable.
The fiber network modules have the following features:
Fiber network module (SM) FN2006: Single-mode transmission up to 131000 ft
Fiber network module (MM) FN2007: Multi-mode transmission up to 13100 ft
Two independent, electrically isolated channels
SC connections for fiber optic cable
Ground fault detection
Trouble signaling via LED and potential-free relay contact
Installation in panel
Fiber network module FN2006 / FN2007
Installation 1
5
Siemens Industry, Inc. A6V10315048_b_en_US
Building Technologies Division 01/13/2012
1.2 Installation
The fiber network module is installed on the far left of the back box of the enclosure
(2HU), beside the power supply. Installation is identical for the following modules:
Fiber network module (SM) FN2006
Fiber network module (MM) FN2007
Each fiber network module is supplied with a set of plugs.
4
1
2
3
Installing the fiber network module FN2006 or FN2007 in the enclosure (2HU)
1 3x fixing screw
2 Fiber network module
3 3x fastening tab on enclosure underside of fiber network module
4 3x threaded sleeve in back box
1. Position the fiber network module (2) on the back box of the enclosure as shown.
2. Screw the fiber network module (2) on the three fastening tabs (3) with three
fastening screws (1) to the threaded sleeves (4) in the back box.
3. Wire up the fiber network module according to the following pin assignment.
Fiber network module FN2006 / FN2007
1 Views
6
Siemens Industry, Inc. A6V10315048_b_en_US
Building Technologies Division 01/13/2012
1.3 Views
Fail1
RX1
LNK1
EF1
LNK2
PowerA
Fail2
RX2
PowerB
Line 1
Line 2
EF2
5
5
4
5
6
123
83
7
Views of the fiber network module from above and the side
1 Fiber optic SC connection for circuit 1
2 Fiber optic SC connection for circuit 2
3 10 LED indicators for data transmission, errors and power supply for both channels
4 Power B socket, redundant power supply and error contact
5 Fastening tab for enclosure installation
6 Power A socket, power supply and error contact
7 Socket A2/B2, FCnet/C-WEB circuit 2
8 Socket A1/B1, FCnet/C-WEB circuit 1
Fiber network module FN2006 / FN2007
Pin assignments 1
7
Siemens Industry, Inc. A6V10315048_b_en_US
Building Technologies Division 01/13/2012
1.4 Pin assignments
1.4.1 Wiring
Power supply wiring
If the fiber network module is installed in the panel, the supply does not have to be
routed redundantly.
If the fiber network module is installed in the panel, the relay contacts for supply
supervision do not have to be connected because the panel's power supply is
already supervised.
'Power A' and 'Power B' inputs can only be supplied by UL 864 approved regulated
power sources.
– Periphery board FCI2016/FCI2017, X1001 DC 24 V AUX
– PAD-3/4
FN2006/FN2007
A1
B1
A2
B2
Line 1
Line 2
Power A
Power B
Circuit 1
+
NC
NO
C
-
+
NC
NO
C
-
+
-
+
-
X1001
24 V
AUX
Fire control panel
Periphery board
FCI2016 / FCI2017
11
1
A1
-
B1
1
Circuit 1
A2
-
B2
1
Wiring of fiber network module, installed in fire control panel
Fiber network module FN2006 / FN2007
1 Pin assignments
8
Siemens Industry, Inc. A6V10315048_b_en_US
Building Technologies Division 01/13/2012
Fiber optic cable wiring
The accessible laser radiation is safe. It corresponds to laser class 1 in accordance
with IEC 60825/ANSI Z136.
The fiber optic cable is wired crosswise:
– The optical transmitter (TX) of one device must always be connected with
the optical receiver (RX) of the other device.
– Circuit 1 must always be connected with circuit 2.
The bending radius of the fiber optic cable must not be less than that specified by
the manufacturer (e.g. 10 x outer diameter).
Class A, style 7 circuit:
FN2006/FN2007 FN2006/FN2007
FN2006/FN2007
Line 1
Line 2
A1
B1
A2
B2
A1
B1
A2
B2
A
1
A
1
A2
B2
A1
B1
A
1
3
3
3
Line 2
Line 1
Line 1
Line 2
Power A
Power B
Power A
Power B
Power A
Power B
A1
B1
A2
B2
A1
B1
A2
B2
A2
B2
A1
B1
FN2006/FN2007
A2
B2
A1
B1
1
3
Line 2
Line 1
Power A
Power B
A2
B2
A1
B1
A
Class A optical network
3
Wiring example of optical network, class A with four fiber network modules
Fiber network module FN2006 / FN2007
Pin assignments 1
9
Siemens Industry, Inc. A6V10315048_b_en_US
Building Technologies Division 01/13/2012
Class B, style 4 circuit:
FN2006/FN2007 FN2006/FN2007
FN2006/FN2007
Line 1
Line 2
A1
B1
A2
B2
A1
B1
A2
B2
A
1
A
1
A2
B2
A1
B1
A
1
3
3
3
Line 2
Line 1
Line 1
Line 2
Power A
Power B
Power A
Power B
Power A
Power B
A1
B1
A2
B2
A1
B1
A2
B2
A2
B2
A1
B1
FN2006/FN2007
A2
B2
A1
B1
1
3
Line 2
Line 1
Power A
Power B
A2
B2
A1
B1
A
Class B optical network
Class B optical network
Wiring example of optical network, class B with four fiber network modules
Designation Description
A Panel with installed fiber network module
1 Network module (SAFEDLINK), main module
3 'Power A', supply input A to fiber network module
A1/B1 Electric FCnet/C-WEB connection for circuit '1'
A2/B2 Electric FCnet/C-WEB connection for circuit '2'
Fiber optic connection (RX), optical receiver
Fiber optic connection (TX), optical transmitter
Fiber network module FN2006 / FN2007
1 Pin assignments
10
Siemens Industry, Inc. A6V10315048_b_en_US
Building Technologies Division 01/13/2012
FCnet/C-WEB wiring
You will find detailed information about FCnetC-WEB wiring and the network module
(SAFEDLINK) FN2001 in the corresponding description.
Electrical FCnet/C-WEB supply line, shielded or unshielded. If the supply line is
shielded, cable glands must be used for the network module (SAFEDLINK). You
will find information about this in the description of the network module
(SAFEDLINK).
Ground faults detected at <1 kΩ
Total length of electrical FCnet/C-WEB wiring: Max. 3300 ft
Each pair individually supervised
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Siemens Unité de contrôle
Siemens
Siemens SCALANCE W788C-2 Manuel utilisateur
Siemens
Siemens SIRIUS 3RW5 series Manuel utilisateur
Siemens
Siemens SIMOTION D4 Series Manuel utilisateur
Siemens
Siemens LMS14 Manuel utilisateur
Siemens
Siemens multiranger 200 Guide de l'utilisateur
Siemens
Siemens SINAMICS G120 Manuel utilisateur
Siemens
Siemens SIMATIC ET 200SP Manuel utilisateur
Siemens
Siemens SIMATIC ET 200S Manuel utilisateur
Siemens
Siemens SIMATIC FM 453 Manuel utilisateur
Siemens
Siemens SIRIUS 8WD44 28-0B Manuel utilisateur
Siemens
Siemens FDCI221 Manuel utilisateur
Siemens
Siemens SIRIUS 3RA2130-4 A3 Series Manuel utilisateur
Siemens
Siemens OCC-1 Manuel utilisateur
Siemens
Siemens SIMATIC RF120C Manuel utilisateur
Siemens
Siemens SENTRON PROFINET Proxy SPP2000 Manuel utilisateur
Siemens
Siemens HLIM Manuel de service
Siemens
Siemens Simatic S7-1500 Manuel de la liste des pièces
Siemens
Siemens LOGO! Series Manuel utilisateur
Siemens
Siemens SINUMERIK 840D sl Manuel de la liste des pièces
Siemens
Siemens PXC-16 Compact Manuel du produit
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
