Siemens SIMATIC ET 200AL Manuel utilisateur

___________________

SIMATIC

ET 200AL

Analog input module

AI 4xU/I/RTD 4xM12

(6ES7144-5KD00-0BA0)

Manual

08/2018

A5E32350124

-AD

Preface

Documentation guide

Product overview

Wiring

Parameters/address space

Interrupts/diagnostics alarms

Technical specifications

PROFIenergy

Dimension drawing

Representation of analog

values

Siemens AG

Division Digital Factory

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E32350124-AD

Ⓟ

08/2018 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Analog input module AI 4xU/I/RTD 4xM12 (6ES7144-5KD00-0BA0)

Manual, 08/2018, A5E32350124-AD 3

Preface

Purpose of the documentation

This manual supplements the ET 200AL distributed I/O system

(http://support.automation.siemens.com/WW/view/en/89254965) system manual. Functions

that are generally applicable to the ET 200AL distributed I/O system are described there.

The information provided in the present manual, the system manual and the function

manuals enables you to commission the ET 200AL distributed I/O system.

Changes compared to previous version

Compared to the previous version, this manual contains changes in the sections Terminal

and block diagram (Page 13) and Technical specifications (Page 37).

Conventions

Please also observe notes marked as follows:

Note

A note contains important information on the product described in the documentation and on

the handling of the product to which par

ticular attention should be paid.

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens' products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be

connected to an enterprise network or the internet if and to the extent such a connection is

necessary and only when appropriate security measures (e.g. firewalls and/or network

segmentation) are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure

to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed under (https://www.siemens.com/industrialsecurity).

Analog input module AI 4xU/I/RTD 4xM12 (6ES7144-5KD00-0BA0)

4Manual, 08/2018, A5E32350124-AD

Table of contents

Preface ................................................................................................................................................... 3

1 Documentation guide .............................................................................................................................. 5

2 Product overview .................................................................................................................................... 9

2.1 Properties................................................................................................................................. 9

2.2 Operator controls and display elements ................................................................................ 12

3 Wiring ................................................................................................................................................... 13

3.1 Terminal and block diagram................................................................................................... 13

3.2 Pin assignment....................................................................................................................... 15

4 Parameters/address space ................................................................................................................... 19

4.1 Measurement types and measuring ranges .......................................................................... 19

4.2 Parameters............................................................................................................................. 20

4.3 Explanation of the parameters............................................................................................... 25

4.4 Address space ....................................................................................................................... 29

5 Interrupts/diagnostics alarms................................................................................................................. 30

5.1 Status and error displays ....................................................................................................... 30

5.2 Interrupts ................................................................................................................................ 32

5.3 Diagnostics alarms................................................................................................................. 34

6 Technical specifications ........................................................................................................................ 37

7 PROFIenergy........................................................................................................................................ 42

7.1 Pause function ....................................................................................................................... 42

7.2 Response of the analog input module ................................................................................... 43

A Dimension drawing ............................................................................................................................... 45

B Representation of analog values ........................................................................................................... 46

B.1 Representation of analog values in voltage measuring ranges............................................. 46

B.2 Representation of analog values in current measuring ranges ............................................. 46

B.3 Representation of analog values for resistance-based sensors............................................ 47

B.4 Representation of analog values for resistance thermometer ............................................... 48

Analog input module AI 4xU/I/RTD 4xM12 (6ES7144-5KD00-0BA0)

Manual, 08/2018, A5E32350124-AD 5

Documentation guide

The documentation for the SIMATIC ET 200AL distributed I/O system is arranged into three

areas.

This arrangement enables you to access the specific content you require.

Basic information

The System Manual and Getting Started describe in detail the configuration, installation,

wiring and commissioning of the SIMATIC ET 200AL distributed I/O system. The STEP 7

online help supports you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, terminal diagrams, characteristics and technical specifications.

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

ET 200AL distributed I/O system, e.g. diagnostics, communication, Motion Control, Web

server.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109742667).

Manual Collection ET 200AL

The Manual Collection contains the complete documentation on the SIMATIC ET 200AL

distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(http://support.automation.siemens.com/WW/view/en/95242965).

Documentation guide

Analog input module AI 4xU/I/RTD 4xM12 (6ES7144-5KD00-0BA0)

6Manual, 08/2018, A5E32350124-AD

"mySupport"

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet (https://support.industry.siemens.com/My/ww/en).

"mySupport" - Documentation

In the Documentation area in "mySupport" you can combine entire manuals or only parts of

these to your own manual.

You can export the manual as PDF file or in a format that can be edited later.

You can find "mySupport" - Documentation on the Internet

(http://support.industry.siemens.com/My/ww/en/documentation).

"mySupport" - CAx data

In the CAx data area in "mySupport", you can access the current product data for your CAx

or CAe system.

You configure your own download package with a few clicks.

In doing so you can select:

●Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN

macro files

●Manuals, characteristics, operating manuals, certificates

●Product master data

You can find "mySupport" - CAx data on the Internet

(http://support.industry.siemens.com/my/ww/en/CAxOnline).

Application examples

The application examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus on individual products.

You will find the application examples on the Internet

(https://support.industry.siemens.com/sc/ww/en/sc/2054).

Documentation guide

Analog input module AI 4xU/I/RTD 4xM12 (6ES7144-5KD00-0BA0)

Manual, 08/2018, A5E32350124-AD 7

TIA Selection Tool

With the TIA Selection Tool, you can select, configure and order devices for Totally

Integrated Automation (TIA).

This tool is the successor of the SIMATIC Selection Tool and combines the known

configurators for automation technology into one tool.

With the TIA Selection Tool, you can generate a complete order list from your product

selection or product configuration.

You can find the TIA Selection Tool on the Internet

(http://w3.siemens.com/mcms/topics/en/simatic/tia-selection-tool).

SIMATIC Automation Tool

You can use the SIMATIC Automation Tool to perform commissioning and maintenance

activities simultaneously on different SIMATIC S7 stations as a bulk operation, independently

of the TIA Portal.

General function overview:

●Network browsing and creation of a table showing the accessible devices in the network

●Flashing of device LEDs or HMI display to locate a device

●Downloading of addresses (IP, subnet, gateway) to a device

●Downloading the PROFINET name (station name) to a device

●Placing a CPU in RUN or STOP mode

●Setting the time in a CPU to the current time of your PG/PC

●Downloading a new program to a CPU or an HMI device

●Downloading from CPU, downloading to CPU or deleting recipe data from a CPU

●Downloading from CPU or deleting data log data from a CPU

●Backup/restore of data from/to a backup file for CPUs and HMI devices

●Downloading service data from a CPU

●Reading the diagnostics buffer of a CPU

●Performing a CPU memory reset

●Resetting devices to factory settings

●Downloading a firmware update to a device

You can find the SIMATIC Automation Tool on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/98161300).

Documentation guide

Analog input module AI 4xU/I/RTD 4xM12 (6ES7144-5KD00-0BA0)

8Manual, 08/2018, A5E32350124-AD

PRONETA

With SIEMENS PRONETA (PROFINET network analysis), you analyze the system network

during commissioning. PRONETA features two core functions:

●The topology overview independently scans the PROFINET network and all connected

components.

●The IO check is a fast test of the wiring and the module configuration of a system.

You can find SIEMENS PRONETA on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/67460624).

SINETPLAN

SINETPLAN, the Siemens Network Planner, supports you in planning automation systems

and networks based on PROFINET. The tool facilitates professional and predictive

dimensioning of your PROFINET installation as early as in the planning stage. In addition,

SINETPLAN supports you during network optimization and helps you to exploit network

resources optimally and to plan reserves. This helps to prevent problems in commissioning

or failures during productive operation even in advance of a planned operation. This

increases the availability of the production plant and helps improve operational safety.

The advantages at a glance

●Network optimization thanks to port-specific calculation of the network load

●Increased production availability thanks to online scan and verification of existing systems

●Transparency before commissioning through importing and simulation of existing STEP 7

projects

●Efficiency through securing existing investments in the long term and optimal exploitation

of resources

You can find SINETPLAN on the Internet (https://www.siemens.com/sinetplan).

Analog input module AI 4xU/I/RTD 4xM12 (6ES7144-5KD00-0BA0)

Manual, 08/2018, A5E32350124-AD 9

Product overview

2.1

Properties

Article number

6ES7144-5KD00-0BA0

View of the module

Figure 2-1 View of the analog input module AI 4xU/I/RTD 4xM12

Autres manuels pour SIMATIC ET 200AL

Table des matières

Autres manuels Siemens Unité de contrôle

Siemens

Siemens 6ES5-424 Manuel du produit

Siemens

Siemens SINUMERIK 840Di sl Manuel de la liste des pièces

Siemens

Siemens SIRIUS 3RK3211 Manuel utilisateur

Siemens

Siemens XCI2001-U1 Mode d’emploi

Siemens

Siemens SIMATIC NET RX1500 Manuel utilisateur

Siemens

Siemens FCI1802-A2 Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens ValvePAC Series Manuel utilisateur

Siemens

Siemens SIMATIC Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens ASIsafe K45 F Manuel utilisateur

Siemens

Siemens QAW850 Manuel utilisateur

Siemens

Siemens SINAMICS S120 Document technique

Siemens

Siemens OMM-1 Manuel utilisateur

Siemens

Siemens SINAMICS Startdrive Manuel utilisateur

Siemens

Siemens simatic ET 200MP Manuel utilisateur

Siemens

Siemens CUA20 Manuel utilisateur

Siemens

Siemens SIMATIC RF170C Manuel utilisateur

Siemens

Siemens Logo! CM EIB Manuel utilisateur

Siemens

Siemens SIRIUS ACT 3SU1400-1EK10-6AA0 Manuel utilisateur

Siemens

Siemens SINUMERIK 840D sl Manuel utilisateur

Siemens

Siemens VAG61 Series Manuel utilisateur

Siemens

Siemens SIMATIC NET CP 343-1 Manuel utilisateur

Siemens

Siemens MVS661 N Series Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur