Shure MXA-MUTE Manuel utilisateur

MXA-MUTE

Network Mute Button

Shure MXA Network Mute Button user guide. Learn how to connect 1 or many PoE-powered mute buttons to Shure mics and processors to

control muting and unmuting.

Version: 1 (2020-E)

Shure Incorporated

2/17

Table of Contents

MXA-MUTENetwork Mute Button 3

IMPORTANT SAFETY INSTRUCTIONS 3

MXA Network Mute Button Overview 4

MXA Network Mute Button Parts 5

What's in the Box 6

How the Network Mute Button Works 6

Installing the Mute Button 7

Power Over Ethernet (PoE) 11

Controlling Devices with Shure Designer Software 12

Using Designer's Optimize Workflow 12

Light Ring 13

Mute Settings 13

Linking Mute Buttons to a Device 13

Compatible Devices 14

Using a Third-Party Control System 14

Specifications 14

Important Product Information 16

Information to the user 16

Shure Incorporated

3/17

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

MXA-MUTE

Network Mute Button

IMPORTANT SAFETY INSTRUCTIONS

READ these instructions.

KEEP these instructions.

HEED all warnings.

FOLLOW all instructions.

DO NOT use this apparatus near water.

CLEAN ONLY with dry cloth.

DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance

with the manufacturer’s instructions.

DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other apparatus (in

cluding amplifiers) that produce heat. Do not place any open flame sources on the product.

DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third

prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replace

ment of the obsolete outlet.

PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

ONLY USE attachments/accessories specified by the manufacturer.

USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a

cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

UNPLUG this apparatus during lightning storms or when unused for long periods of time.

REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the

apparatus.

The MAINS plug or an appliance coupler shall remain readily operable.

The airborne noise of the Apparatus does not exceed 70dB (A).

Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connec

tion.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.

Operate this product within its specified operating temperature range.

Shure Incorporated

4/17

•

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accom

panying this unit.

MXA Network Mute Button Overview

The MXA Network Mute Button is a configurable PoE-powered mute button accessory designed for muting and unmuting

Shure networked products, including Microflex Advance array microphones, IntelliMix P300, IntelliMix Room, and ANIUSB-

MATRIX. One or many of the lowprofile, touchsensitive mute buttons can be configured to mute one or multiple MXA micro

phones, depending on user needs or room configurations.

Designer System Configuration software for easy setup and configuration

SystemOn Audio Asset Management software for remote management and troubleshooting

PoE powered

Compatible with third-party control systems via programmable command strings

LED status with configurable colors and brightness

Easy table installation in 1 inch (25 mm) or 7/8 inch (22 mm) holes

®™®

™

Shure Incorporated

5/17

◦

MXA Network Mute Button Parts

Mute button

Press to mute connected devices. Toggle, push-to-talk, and push-to-mute modes are also available.

Mute button tube

Insert into the hole on the table.

Light ring

Open the mute button in Designer to control color and brightness.

Network port

Connect a Cat5e (or better) cable supplying Power over Ethernet (PoE) here.

Reset button

Network reset (press for 4-8 seconds): Resets all Shure control IP settings to factory defaults.

Full factory reset (press for more than 8 seconds): Resets all network and configuration settings to the factory de

faults.

Power cable

Connect to the 8-pin power connector on the base.

Power cable connector

Shure Incorporated

6/17

10.

•

Connect the 8-pin power cable here.

Base

Sits underneath the table surface and provides power and control signals to the mute button.

Grommet

Use to adjust the fit of the tube in 7/8 or 1 inch (22 or 25 mm) holes.

Spacer

Use the spacers to adjust the position of the network port on the base under the table.

What's in the Box

Mute button

Base

Grommet

Spacers (2)

How the Network Mute Button Works

The network mute button is a simple muting solution for rooms with no microphone on the table, for when the microphone has

no mute button, or for when you need another way to control muting. Use Shure Designer software to link mute buttons to a

compatible device.

You can link mute buttons to Shure microphones, DSPs, or audio network interfaces. When you link mute buttons to a DSP or

audio network interface, any supported devices connected to the DSP or audio network interface match the button's mute sta

tus.

For example, in this room, 2 mute buttons are linked to a P300. Two MXA910 microphones are connected to the P300, and the

P300 sends the near-end signal to a soft codec running on a computer. When you press one of the mute buttons, all connected

devices show the correct mute status. The signal gets muted at the best point in the signal chain for DSP performance.

Shure Incorporated

7/17

•

Installing the Mute Button

The mute button fits in tables that are between 0.31 and 2.05 inches (8 to 52 mm) thick.

To get started, you will need:

Drill with 7/8 or 1 inch (22 or 25 mm) drill bit

Drill a hole in the table. You can use a 7/8 or 1 inch (22 or 25 mm) drill bit, because the grommet accommodates both

sizes. The mute button tube is 7/8 inches (22 mm) wide.

Insert the mute button tube into the hole.

Shure Incorporated

8/17

Shure Incorporated

9/17

◦

Slide the grommet onto the tube so it's flush against the bottom of the table.

7/8 inch (22mm) hole: Grommet pointing down

1 inch (25mm) hole: Grommet pointing up

Optional: Add 1 or more of the included spacers between the grommet and the base to help position the network port

under the table. The spacers give you multiple network port positions.

Slide the base onto the tube and tighten it by hand until it is snug against the table. You may want to hold the top of the

mute button as you tighten the base to keep the mute icon correctly positioned on the table.

Shure Incorporated

10/17

5. Connect the 8-pin power cable to the power connector on the base.

Table des matières

Autres manuels Shure Système de microphone

Shure

Shure A412B Manuel utilisateur

Shure

Shure ULX Wireless System Manuel utilisateur

Shure

Shure microphone system Manuel utilisateur

Shure

Shure BLX Wireless System Manuel utilisateur

Shure

Shure ULX Wireless Microphone System Manuel utilisateur

Shure

Shure ULX-D Manuel utilisateur

Shure

Shure ULX-D Manuel utilisateur

Shure

Shure MXW Fiche technique

Shure

Shure BLX4R Manuel utilisateur

Shure

Shure GLXD6 Manuel utilisateur

Shure

Shure ULXD8 Manuel utilisateur

Shure

Shure PGXD Series Manuel utilisateur

Shure

Shure MXWAPT Series Fiche technique

Shure

Shure PA421B Manuel utilisateur

Shure

Shure Performance Gear Manuel utilisateur

Shure

Shure R6 Manuel du propriétaire

Shure

Shure SCM800 Manuel utilisateur

Shure

Shure AMS4000 Manuel utilisateur

Shure

Shure T series Manuel utilisateur

Shure

Shure PSM1000 Manuel utilisateur

Shure

Shure PGXD Manuel utilisateur

Shure

Shure BLX4R Manuel utilisateur

Shure

Shure DuraPlex DH5 Manuel utilisateur

Shure

Shure Sistema Microflex MXCW Manuel utilisateur

Manuels Système de microphone populaires d'autres marques

Paso

Paso R824 Manuel utilisateur

Naxa

Naxa NAM-982 Manuel utilisateur

Motorola

Motorola PMNN4461 Manuel utilisateur

Xvive

Xvive U3 Manuel utilisateur

Tekon

Tekon DUOS Manuel utilisateur

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Manuel utilisateur

Devine

Devine WMD-IE Manuel utilisateur

LG LF-D7150 Manuel utilisateur

GE S768DAV Manuel utilisateur

LD U305 HBH 2 Manuel utilisateur

Chainway

Chainway URA8 Manuel utilisateur

ORATOR

ORATOR D860TD Manuel utilisateur

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuel utilisateur

Alpha Technologies

Alpha Technologies RBMS Manuel utilisateur

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Manuel utilisateur

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuel utilisateur

Pyle

Pyle PDWM5000 Manuel utilisateur

Airspan

Airspan AS4000 Mode d’emploi