Sennheiser SK 2000 Manuel utilisateur
1
Contents
Contents
Important safety instructions .......................................................................... 2
The SK 2000 bodypack transmitter ................................................................ 3
Areas of application ........................................................................................ 3
The frequency bank system .......................................................................... 4
Delivery includes .................................................................................................. 5
Product overview ................................................................................................. 6
Overview of the SK 2000 bodypack transmitter ....................................... 6
Overview of the displays ................................................................................ 7
Putting the bodypack transmitter into operation ....................................... 8
Inserting the batteries/accupack ................................................................. 8
Charging the accupack .................................................................................... 8
Connecting the microphone cable/instrument cable ............................... 8
Attaching the bodypack transmitter to clothing ...................................... 9
Using the bodypack transmitter ................................................................... 11
Switching the bodypack transmitter on/off ........................................... 11
Deactivating the lock mode temporarily ................................................. 12
Muting the audio signal or deactivating the RF signal ......................... 13
Selecting a standard display ...................................................................... 15
Using the operating menu ............................................................................. 16
The buttons .................................................................................................... 16
Overview of the operating menu ............................................................... 16
Working with the operating men .............................................................. 18
Synchronizing the bodypack transmitter with a receiver ...................... 20
Cleaning the bodypack transmitter ............................................................. 21
If a problem occurs ... ....................................................................................... 21
Specifications .................................................................................................... 23
Manufacturer Declarations ............................................................................. 25
For more detailed information on the individual sections of
this instruction manual, visit the corresponding product
page on our website at www.sennheiser.com.
SK2000_529677_0409_Sp8.book Seite 1 Dienstag, 3. März 2009 3:32 15
2
Important safety instructions
Important safety instructions
• Read this instruction manual.
• Keep this instruction manual. Always include this instruction manual
when passing the device on to third parties.
• Heed all warnings and follow all instructions.
• Clean the device only with a slightly damp cloth.
• Do not place the device near any heat sources such as radiators, stoves,
or other devices (including amplifiers) that produce heat.
• Only use attachments/accessories specified by Sennheiser.
• When replacement parts are required, only use replacement parts
specified by Sennheiser or those having the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
• Refer all servicing to qualified service personnel.
Servicing is required if the device has been damaged in any way, liquid
has been spilled, objects have fallen inside, the device has been exposed
to rain or moisture, does not operate properly or has been dropped.
• WARNING: To reduce the risk of short circuits, do not use the device near
water and do not expose it to rain or moisture.
Intended use
Intended use of the SK 2000 bodypack transmitter includes:
• having read these instructions especially the chapter “Important safety
instructions”,
• using the device within the operating conditions and limitations
described in this instruction manual.
“Improper use” means using the device other than as described in these
instructions, or under operating conditions which differ from those
described herein.
SK2000_529677_0409_Sp8.book Seite 2 Dienstag, 3. März 2009 3:32 15
3
The SK 2000 bodypack transmitter
The SK 2000 bodypack transmitter
This bodypack transmitter is part of the 2000 series. With this series,
Sennheiser offers high-quality state-of-the-art RF transmission systems
with a high level of operational reliability and ease of use. Transmitters
and receivers permit wireless transmission with studio-quality sound.
Features of the 2000 series:
• Optimized PLL synthesizer and microprocessor technology
•HDX noise reduction system
•Pilottonesquelchcontrol
• True diversity technology
• Switching bandwidth of up to 75 MHz
• Increased immunity to intermodulation and interferences in multi-
channel operation
Areas of application
The bodypack transmitter can be combined with the EM 2000 or EM 2050
rack-mount receiver. The receivers are available in the same UHF
frequency ranges and are equipped with the same frequency bank system
with factory-preset frequencies. An advantage of the factory-preset
frequencies is that
• a transmission system is ready for immediate use after switch-on,
• several transmission systems can be operated simultaneously on the
preset frequencies without causing intermodulation interference.
Transmitter Combinable with Receivers
SK 2000 •Clip-onmicrophones:
MKE 1, ME 102,
ME 104, ME 105*
EM 2000 receiver
EM 2050 twin receiver
• Headmics:
HSP 2, HSP 4*
• Instrumente cable:
CI 1-4*
* each equipped with a 3-pin special audio connector
543.200
B.Ch: 20.64
PEAK
MUTE
EQ:
+ 12dB
P
-10
040
30
20
10
-20
-30
-40
AF
RF
MHz
TrueDiversity Receiver EM 2000 **2000**
SKM2000
543.200
**2000** **2000**
B.Ch: 20.64
PEAK
MUTE
EQ:
+ 12dB
P
-10
040
30
20
10
-20
-30
-40
AF
RF
MHz
543.200
B.Ch: 20.64
PEAK
MUTE
EQ:
+ 12dB
P
-10
040
30
20
10
-20
-30
-40
AF
RF
MHz
TrueDiversity Receiver EM 2050
SKM2000 SKM2000
SK2000_529677_0409_Sp8.book Seite 3 Dienstag, 3. März 2009 3:32 15
4
The SK 2000 bodypack transmitter
Overview of the microphones and instrument cables:
The frequency bank system
The bodypack transmitter is available in 6 UHF frequency ranges with up
to 3,000 transmission frequencies per frequency range:
Each frequency range (Aw–Ew, Gw) offers 26 frequency banks with up to
64 channels each:
Microphone/instrument cable Type
Pick-up pattern
MKE 1 clip-on microphone
condenser
omni-directional
ME 102 clip-on microphone cardioid
ME 104 clip-on microphone cardioid
ME 105 clip-on microphone super-cardioid
HSP 2 headmic omni-directional
HSP 4 headmic cardioid
CI 1-4 instrument cable – –
500 600 700 800
Range Gw:
558 – 626
Range Bw:
626 – 698
Range Cw:
718 –790
Range Dw:
790 – 865
516 – 558
Range Aw:
Frequency bank 1 ... 20
Frequency bank U1 ... U6
Channel 64 – frequency preset
Channel 1– frequency preset
Channel 2– frequency preset
Channel 64 – freely selectable frequency
Channel 1– freely selectable frequency
Channel 2– freely selectable frequency
SK2000_529677_0409_Sp8.book Seite 4 Dienstag, 3. März 2009 3:32 15
5
Delivery includes
Each of the channels in the frequency banks “1” to “20” has been factory-
preset to a fixed transmission frequency (frequency preset). The factory-
preset frequencies within one frequency bank are intermodulation-free.
These frequencies cannot be changed.
For an overview of the frequency presets, please refer to the supplied
frequency information sheet. Updated versions of the frequency informa-
tion sheet can be downloaded from the corresponding product page on our
website at www.sennheiser.com.
The frequency banks “U1” to “U6” allow you to freely select and store
transmission frequencies. It might be that these transmission frequencies
are not intermodulation-free.
Delivery includes
The packaging contains the following items:
1 SK 2000 bodypack transmitter
2 AA size batteries, 1.5 V
1 BPP 1 bodypack pouch
1 instruction manual
1 frequency information sheet
1 RF power information sheet
SK2000_529677_0409_Sp8.book Seite 5 Dienstag, 3. März 2009 3:32 15
6
Product overview
Product overview
Overview of the SK 2000 bodypack transmitter
Microphone/instrument input
(MIC/LINE), 3-pole special audio
socket, lockable
MUTE switch
Antenna
Operation and battery status
indicator, red LED:
lit = ON
flashing = LOW BATT
Audio overmodulation indicator,
yellow LED:
lit = AF PEAK
Charging contacts
SET button
왖/왔rocker button (UP/DOWN)
Battery compartment
Battery compartment cover
(metal)
Battery compartment catches
Infra-red interface
ON/OFF button
(serves as the ESC (cancel) key in
the operating menu)
Display panel, backlit in orange
쐋
SK2000_529677_0409_Sp8.book Seite 6 Dienstag, 3. März 2009 3:32 15
7
Product overview
Overview of the displays
After switch-on, the bodypack transmitter displays the standard display
“Frequency/Name”. For further illustrations and examples of the different
standard displays, refer to page 15. The display backlighting is automati-
cally reduced after approx. 20 seconds.
Display Meaning
Audio level “AF”Modulation of the bodypack transmitter
When the audio input level is excessively high,
the “AF” display shows full deflection and, in
addition, the yellow AF PEAK LED lights up:
Frequency Current transmission frequency
Name User selectable name
Transmission icon RF signal is being transmitted
Lock mode icon Lock mode is activated
“P” (Pilot) Pilot tone transmission is activated
“MUTE”Microphone or line input is muted
Battery status Charge status:
MHz
543.200
**2000**
MUTE
P
AF
approx. 100%
approx. 70%
approx. 30%
charge status is critical
, the red
LOW BATT LED
is flashing:
SK2000_529677_0409_Sp8.book Seite 7 Dienstag, 3. März 2009 3:32 15
8
Putting the bodypack transmitter into operation
Putting the bodypack transmitter into
operation
Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use two 1.5 V AA
size batteries or the rechargeable Sennheiser BA 2015 accupack.
왘Open the battery compartment by pushing the two catches in the
direction of the arrows and open the cover .
왘Insert the two batteries or the accupack as shown above. Please
observe correct polarity when inserting the batteries/accupack.
왘Close the battery compartment.
The battery compartment cover locks into place with an audible
click.
Charging the accupack
To charge the bodypack transmitter with the BA 2015 accupack (optional
accessory) installed:
왘Insert the bodypack transmitter into the L 2015 charger (optional
accessory).
Connecting the microphone cable/instrument cable
The audio input is designed for the connection of both condenser micro-
phones and instruments (e.g. guitars). DC powering of the condenser
microphones is via the audio input MIC/LINE .
The L 2015 charger can only charge the combination BA 2015
accupack/bodypack transmitter. Standard batteries (primary
cells) or individual rechargeable battery cells cannot be charged.
SK2000_529677_0409_Sp8.book Seite 8 Dienstag, 3. März 2009 3:32 15
9
Putting the bodypack transmitter into operation
왘Use one of the recommended Sennheiser microphones or the CI 1-4
instrument cable (see page 3).
왘Connect the 3-pin special audio connector from the Sennheiser
microphone or instrument cable to the socket MIC/LINE .
왘Lock the 3-pin special audio connector by screwing down the coupling
ring of the cable.
왘Via the operating menu, adjust the sensitivity of the microphone/line
input.
Attaching the bodypack transmitter to clothing
You can use supplied bodypack pouch or the belt clip to attach the
bodypack transmitter to clothing (e.g. belt, waistband).
The belt clip is detachable so that you can also attach the transmitter with
the antenna pointing downwards. To do so, withdraw the belt clip from
its fixing points and attach it the other way round.
The belt clip is secured so that it cannot slide out of its fixing points
accidentally.
SK2000_529677_0409_Sp8.book Seite 9 Dienstag, 3. März 2009 3:32 15
10
Putting the bodypack transmitter into operation
To detach the belt clip:
왘Lift one side of the belt clip as shown.
왘Press down the belt clip at one fixing point and pull it out of the trans-
mitter housing.
왘Repeat for the other side.
SK2000_529677_0409_Sp8.book Seite 10 Dienstag, 3. März 2009 3:32 15
Autres manuels pour SK 2000
3
Table des matières
Autres manuels Sennheiser Émetteur
Sennheiser
Sennheiser SKP 100 G3 Manuel utilisateur
Sennheiser
Sennheiser SKM 5200 Dimensions
Sennheiser
Sennheiser SKP 100 Manuel utilisateur
Sennheiser
Sennheiser SKP 500 G2 Manuel utilisateur
Sennheiser
Sennheiser SKM 1032 Manuel utilisateur
Sennheiser
Sennheiser EM 300 G3 - 01-09 Manuel utilisateur
Sennheiser
Sennheiser EM 300 G3 - 01-09 Manuel utilisateur
Sennheiser
Sennheiser BT T100 Manuel utilisateur
Sennheiser
Sennheiser SK 5212-II Manuel utilisateur
Sennheiser
Sennheiser CHG 2W Manuel utilisateur
Sennheiser
Sennheiser E W 300 IEM G2 Manuel utilisateur
Sennheiser
Sennheiser SK 9000 Manuel utilisateur
Sennheiser
Sennheiser SK 1007 Manuel utilisateur
Sennheiser
Sennheiser SI 1010 Manuel utilisateur
Sennheiser
Sennheiser ew 300 IEM G3 Manuel utilisateur
Sennheiser
Sennheiser SK 2000 Manuel utilisateur
Sennheiser
Sennheiser SK 250 Manuel utilisateur
Sennheiser
Sennheiser SK 100 G3 Manuel utilisateur
Sennheiser
Sennheiser AC 3200-II High Gain Manuel utilisateur
Sennheiser
Sennheiser SK 5212-II - FREQUENCY TABLES Dimensions
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
