Seiko DPU-414 Manuel utilisateur

USER'S GUIDE

Thermal Printer

DPU-414

Read this manual carefully before using the printer.

Keep this manual in a place where it can be accessed

quickly.

Seiko Instruments Inc.

DPU-414 THERMAL PRINTER USER'S GUIDE

U00120592100 June 2010

U00120592101 October 2011

U00120592102 February 2012

U00120592103 March 2012

U00120592104 June 2012

U00120592105 January 2013

Seiko Instruments Inc. (SII) has prepared this manual for use by SII personnel,

licensees, and customers. The information contained herein is the property of SII

and shall not be reproduced in whole or in part without the prior written approval of

SII.

SII reserves the right to make changes without notice to the specifications and

materials contained herein and shall not be responsible for any damages (including

consequential) caused by reliance on the materials presented, including but not

limited to typographical, arithmetic, or listing errors.

is a trademark of Seiko Instruments Inc.

Please refer to the page in Chinese for the information of the hazardous substances

under China RoHS (Management Methods for Controlling Pollution by Electronic

Information Products).

For use in Turkey

Complies with Electrical and Electronic Equipment Directive.

Türkiye' deki Kullanıcılar için

EEE Yönetmeliğine Uygundur.

Applicable EC Directive and Standards

Product: Thermal Printer DPU-414-40B-E, DPU-414-41B-E

Directive: Title

2004/108/EC EC Electromagnetic Compatibility Directive

2009/125/EC Directive on Eco-Design of Energy-related Products

2011/65/EU Restriction of the use of certain hazardous substances

(RoHS) Directive

Standards

EN 55022 Class B

EN 61000-3-2

EN 61000-3-3

EN 55024

EN 50581

Product: AC adapter PW-C0725-W1-E

Product: AC adapter PW-C0725-W1-B

Directive: Title

2004/108/EC EC Electromagnetic Compatibility Directive

2006/95/EC EC Low Voltage Directive

2009/125/EC Directive on Eco-Design of Energy-related Products

2011/65/EU Restriction of the use of certain hazardous substances

(RoHS) Directive

Standards

EN 55022 Class B

EN 61000-3-2

EN 61000-3-3

EN 55024

EN 60950-1

EN 50581

Federal Communications Commission (FCC) compliance statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Any changes in this certified device could void your legal right to operate it.

Industry Canada (IC) compliance statement

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

- 1 -

INTRODUCTION

Thank you for purchasing the DPU-414 thermal printer.

This USER'S GUIDE explains how to handle DPU-414 thermal printer

(hereinafter referred to as printer), specified AC adapter, specified battery

pack and specified AC cable (hereinafter, omit "specified").

This USER'S GUIDE applies to the following product.

・DPU-414-40B-E

Read through the Safety Precautions on Page 2 to 6 carefully before using the

printer.

This manual consists of the following sections.

INTRODUCTION........................................................... 1

SAFETY PRECAUTIONS.............................................. 2

OPERATING PRECAUTIONS ...................................... 9

NOTATIONS USED IN THIS MANUAL........................ 11

1. PREPARATION..................................................... 12

2. OPERATION ......................................................... 16

3. PRINTING FUNCTION.......................................... 32

4. CONTROL CODE.................................................. 34

5. CHARACTER CODE TABLE................................. 36

6. SPECIFICATIONS................................................. 38

7. TROUBLESHOOTING........................................... 45

8. CARING FOR THE DPU-414 PRINTER ............... 48

SAFETY PRECAUTIONS

The following symbols are used in this manual in order to make use of the

printer properly and prevent the printer from being damaged.

Follow the instructions marked with the symbol.

Severe Personal Injury or Death

Failure to follow the guidelines marked with

this symbol could result in severe personal

jury or death.in

Minor Personal Injury or Product and/or

Peripheral Damage.

Failure to follow the guidelines marked with

this symbol could result in minor personal

injury or product and/or peripheral damage.

WARNING

CAUTION

Symbol Examples

The symbol indicates caution (including danger and warning).

The example on the left indicates warning or caution.

The symbol indicates prohibition.

The example on the left means prohibition of disassembling.

The symbol indicates requirement or what must be done.

The example on the left means "pull the power plug out of the outlet".

- 2 -

Precautions in the Printer

WARNING

DO NOT use the printer, the AC adapter and the AC cable in countries

where these items do not comply with the regulations.

Doing so, we do not assure the safety of these products and you will be

responsible for violation of regulations.

POWER OFF the printer, unplug the power cable from the power outlet,

and remove the battery pack in any of the following cases:

The printer does not recover from an error.

Smoke, strange noise, overheat or smells erupt from the printer.

A piece of metal or any liquid touches the internal parts or slot of the

printer.

Case is broken.

Doing so may cause fire or electric shock. Please contact your vender to

repair the products.

DO NOT insert any foreign objects such as a piece of metal or any liquid

in the internal parts or slot of the printer.

Doing so may cause fire or electric shock.

DO NOT disassemble or remodel the printer. DO NOT REPAIR THE

PRINTER YOURSELF.

Doing so may cause fire, a failure or other accidents.

DO NOT use an AC adapter, AC cable or battery pack other than that

which is specified.

Doing so may cause explosion, overheating or fire leading to serious

accidents.

DO NOT use any power supply of the AC adapter other than specified

range of one.

Doing so may cause fire, a failure or other accidents.

DO NOT touch the output terminal or metallic area of the connector to

avoid short-circuiting.

Doing so may cause fire, a failure or other accidents.

- 3 -

DO NOT put the printer into water in a place where it could get wet.

Doing so may cause fire, a failure or other accidents.

DO NOT touch the printer by wet hand.

If not, it might cause electric shock.

POWER OFF the printer before removing/inserting the battery pack.

If not, it might cause electric shock.

UNPLUG the AC plug from the outlet when there is the AC cable of the

AC adapter damaged.

Doing so may cause fire, a failure or electric shock.

Please contact your vender to repair the products.

Keep the AC plug of the AC adapter away from dust and metallic

materials.

If not, it might cause fire or electric shock.

Plug the AC plug of the AC adapter completely.

If not, it might cause fire or electric shock.

DO NOT destroy the AC cable or plug of the AC adapter. Moreover, DO

NOT bend, pull or twist the AC cable forcibly, or place heavy object on

the cable.

Doing so may cause fire, a failure or electric shock.

UNPLUG the AC adapter from the outlet, do not pull on the cable but hold

onto the plug.

Exposure or disconnection of the cable might cause fire or electric shock.

- 4 -

CAUTION

If the printer is not used for a long time, unplug the AC plug from the

outlet and remove the battery pack from the printer.

If not, it might cause fire or electric shock.

When cleaning the printer, unplug the AC plug from the outlet and

remove the battery pack from the printer.

If not, it might cause fire or electric shock.

Keep the printer out of the reach of children.

If not, it might cause injury.

DO NOT subject the printer to the following places as it may lead to fire,

a failure or injury.

Places of direct sunlight or high temperature.

Places of extreme humidity or any place where it can possibly be

splashed by any liquids.

Places with strong vibration or is inclined.

DO NOT cover the printer with any clothes.

Doing so may cause fire or a failure.

NEVER touch the thermal head immediately after printing because it

becomes very hot. Make sure that the thermal head is cool before

clearing a paper jam or cleaning the thermal head.

Doing so may cause injury.

NEVER touch the portions such as the thermal head or the paper sensor

or the platen roller directly while opening the paper cover to install the

thermal paper for example.

Doing so may cause injury or other accidents.

- 5 -

Be sure to hold the battery cover to the printer when the battery pack is

inserted in the printer.

Fall of the battery pack due to the battery cover slid off may cause injury

or any damages.

DO NOT make your hair, etc. which are easily entangled in the printer

approach to the printer during the operation

Doing so may cause injury.

- 6 -

Autres manuels pour DPU-414

Table des matières

Autres manuels Seiko Imprimante

Seiko

Seiko FB 390 Manuel utilisateur

Seiko

Seiko SLP100 Mode d’emploi

Seiko

Seiko SII LTP01-245-11 Manuel d'utilisation et d'entretien

Seiko

Seiko PRECISION FB 380 Manuel utilisateur

Seiko

Seiko DPU-3445 Manuel utilisateur

Seiko

Seiko LTPD245D Manuel d'utilisation et d'entretien

Seiko

Seiko DPU-S245-00A-E Manuel utilisateur

Seiko

Seiko MTP Series Manuel d'utilisation et d'entretien

Seiko

Seiko CT-2000 Manuel utilisateur

Seiko

Seiko IP-7900 Manuel utilisateur

Seiko

Seiko LTP F Series Manuel utilisateur

Seiko

Seiko MPU-L465 Series Manuel utilisateur

Seiko

Seiko RP-E10 Series Manuel utilisateur

Seiko

Seiko SII SLP720RT Series Manuel utilisateur

Seiko

Seiko SII RP-E10 Series Manuel utilisateur

Seiko

Seiko Smart Label Printer SLP620 Manuel utilisateur

Seiko

Seiko SII RP-D10 Series Manuel utilisateur

Seiko

Seiko DPU-H245AP-A03A-E Manuel utilisateur

Seiko

Seiko MPU-L465-17 Manuel utilisateur

Seiko

Seiko TM-T90 Manuel utilisateur

Seiko

Seiko LTP1245R-C384-E Manuel d'utilisation et d'entretien

Seiko

Seiko MP-A40 SERIES Manuel utilisateur

Seiko

Seiko DPU-3445 Manuel utilisateur

Seiko

Seiko IP-7900 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur