Sealey AP165WB Manuel utilisateur

INSTRUCTIONS FOR:

STEEL WORKBENCH 1650mm

MODEL No: AP165WB

1. SAFETY INSTRUCTIONS

2. INTRODUCTION

1.1 GENERAL SAFETY

 WARNING! Ensure Health & Safety, local authority, and general workshop practice

regulations are adhered to when using this workbench.

 WARNING! Use caution when handling and assembling the metal components. The

metal may have sharp edges or corners, the use of protective gloves is recommended.

Locate workbench in a suitable working area.

 Keep the work area clean, uncluttered and ensure there is adequate lighting.

Keep the workbench clean and tidy in accordance with good workshop practice.

Keep children and unauthorised persons away from the working area.

 DO NOT climb, step or stand on the workbench.

 DO NOT use the workbench for any purpose other than that for which it is designed.

 DO NOT use in damp work areas.

 WARNING! The warnings, cautions and instructions referred to in this instruction

manual cannot cover all possible conditions and situations that may occur. It must be

understood that common sense and caution are factors which cannot be built into this

product, but must be applied by the operator.

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,

WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.

FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE

KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

AP165WB Issue No: 1 - 09/10/08

Use as part of a complete professional garage storage system or an individual workbench. Featuring wooden worktop, six legs tted with adjustable

feet for levelling on uneven oors. All steel construction with a graphite powder coat nish.

Overall Size (W x D x H): 1650 x 509 x 945mm

Fig.1

Contents Qty

1 Leg Assembly 3

2 Short Cross Bar 2

3 Long Cross Bar 2

4 Bench Top 1

5 Adjustable Foot 6

6 Machine Screw 36

7 Flange Nut 36

8 Self Tapping Screw 8

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor

Sealey Group,

Bury St. Edmunds, Suffolk.

www.sealey.co.uk

Web

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.

4. MAINTENANCE

4.1 Periodically check the overall condition of the workbench.

4.2 Tighten any loose screws and repair or replace any broken or damaged parts.

AP165WB Issue No: 1 - 09/10/08

Refer to exploded diagram in Fig.1 when assembling this workbench.

3.1 Place the bench top (4) on a protected level surface with the pre-drilled holes facing upwards.

3.2 Attach the two long cross bars (3) to the top using screws (8) to the underside of the bench top, tighten fully using a phillips screwdriver.

3.3 Place two leg assemblies (1) perpendicularly and align them together with a short cross bar (2) via the pre-drilled holes, insert machine

screws (6) into each of the holes and secure using nuts (7). Repeat the operation for the third leg. Fully tighten all nuts using a 10mm

socket wrench.

3.4 Adjust the feet to ensure that the workbench frame is level.

3.5 Place the bench top onto the workbench frame and align the holes in the long cross bar with those on the frame. Insert screws (6) into

each hole and secure with nuts (7). Once all are in place tighten fully with a 10mm socket wrench.

3.6 Check completed workbench to ensure that it is level and make any nal adjustments to the feet if required.

3. ASSEMBLY

Work Bench shown here in conjunction with other options available.

Contact your Sealey Dealer for more details.

Parts support is available for this product.

To obtain a parts list and diagram please log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500

Table des matières

Autres manuels Sealey Rangement des outils

Sealey

Sealey SC01.V2 Manuel utilisateur

Sealey

Sealey AP0618.V4 Manuel utilisateur

Sealey

Sealey PTB66004 Manuel utilisateur

Sealey

Sealey AP22DFC Manuel utilisateur

Sealey

Sealey PTB91508 Manuel utilisateur

Sealey

Sealey API1500 Manuel utilisateur

Sealey

Sealey AP6601.V2 Manuel utilisateur

Sealey

Sealey Power Products API1500 Manuel utilisateur

Sealey

Sealey AP28104BR Manuel utilisateur

Sealey

Sealey PTSR2 Manuel utilisateur

Sealey

Sealey AP2030BB Manuel utilisateur

Sealey

Sealey AP850MB Manuel utilisateur

Sealey

Sealey PTB39003 Manuel utilisateur

Sealey

Sealey PTB141007 Manuel utilisateur

Sealey

Sealey AP1520.V2 Manuel utilisateur

Sealey

Sealey AP6115BE Manuel utilisateur

Sealey

Sealey AP1520 Manuel utilisateur

Sealey

Sealey AP2030 Manuel utilisateur

Sealey

Sealey AP3020 Manuel utilisateur

Sealey

Sealey PCT1 Manuel utilisateur

Sealey

Sealey FWB1 Manuel utilisateur

Sealey

Sealey CX1042D Manuel utilisateur

Sealey

Sealey AP2416 Manuel utilisateur

Sealey

Sealey PTB66004SS Manuel utilisateur

Manuels Rangement des outils populaires d'autres marques

Ryobi

Ryobi RWB03 Manuel utilisateur

Husky

Husky H27CH5TR4BGK Manuel utilisateur

Scheppach

Scheppach ts 2100 Manuel utilisateur

Cornwell Tools

Cornwell Tools CTB360AKBK Manuel utilisateur

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manuel utilisateur

Cassese

Cassese CS200 CART Manuel utilisateur

Kendall Howard

Kendall Howard ESDW-9630-1000 Manuel utilisateur

Lista

Lista Align Instructions de montage

Workzone

Workzone 99609 Manuel utilisateur

Stanley

Stanley STST83800-1 Manuel utilisateur

Homak

Homak PROFESSIONAL Series Manuel du système

Perel

Perel ROLLER SHUTTER STORAGE CABINET Manuel utilisateur

Husky

Husky H5CH2R Manuel utilisateur

BGS technic

BGS technic 4107 Manuel utilisateur

Clarke

Clarke CWB1250 Manuel utilisateur

Ryobi

Ryobi RWB02 Manuel utilisateur

Husky

Husky H52CH6HDV3WHT Manuel utilisateur

General International

General International Excalibur 40-100 Manuel de la liste des pièces