Samsung MCM-A100 Manuel utilisateur

ENGLISH

ENGLISHESPAÑOLFRANÇAISITALIANOPORTUGUÊSDEUTSCH

USER’S MANUAL

Function Controller

MCM-A100

System Air Conditioner

DB98-27317A(1)SE F I DP G R A

EΛΛHNIKARUSSIAN

MCM-A100_IB_E_27317.indd 17 2007-01-31 ｿﾀﾀ・10:26:56

E-2

Safety Precautions

•

Before using the function controller, read carefully this instructions.

•

After reading the instructions, keep this user’s manuals and the installation manual in a

handy and safe place. If a user is changed, you must hand over the manuals.

•

Never attempt to install the air conditioning system or to move the function controller

by yourself.

WARNING



Do not attempt to install or repair this function controller

by yourself.



This function controller contains no user-serviceable parts.

Always consult authorized service personnel for repairs.



When moving, consult authorized service personnel for

disconnection and installation of the function controller.



Ensure that the wall is strong enough to support the

weight of the function controller.



Must install the function controller with rated power

supply.



In the event of a malfunction (burning smell, etc.),

immediately stop operation, turn off the electrical breaker,

and consult authorized service personnel.

CAUTION



Do not use inflammable gases near the function

controller.



Do not spill water into the function controller.



Do not operate the function controller with wet hands.



Do not install the function controller in a location where

it will come into contact with the combustible gases,

machine oil, sulphide gas, etc.



Do not press buttons with a pointed thing.



Do not pull or bend the function controller cable

excessively.



Do not use this function controller for other purpose.



Do not spray an insecticide or other combustible things

on the function controller.



Do not clean the function controller with benzene,

solvents or other chemicals.



Do not give a shock to the function controller or

disassemble it by yourself.

MCM-A100_IB_E_27317.indd 2 2007-01-31 ｿﾀﾀ・10:26:56

E-3

ENGLISH

Contents

 VIEW OF THE FUNCTION CONTROLLER

............................................

 GETTING START

.................................................................................

 SELECTING THE INDOOR UNIT

..........................................................

 SELECTING THE AUTOMATIC OPERATING MODE

...........................

 COOLING YOUR ROOM

.....................................................................

 HEATING YOUR ROOM(

EXCEPT COOLING ONLY MODELS

)

...........

 REMOVING EXCESS HUMIDITY

........................................................

 AIRING YOUR ROOM

.......................................................................

 ADJUSTING THE AIR FLOW DIRECTION(

EXCEPT DUCT TYPE

)

.......

MCM-A100_IB_E_27317.indd 3 2007-01-31 ｿﾀﾀ・10:26:56

E-4

Getting Started

You have just purchased a function controller and it has been installed by your

installation specialist.

Your user’s manual contains much valuable information on using your function

controller. Please take time to read as it will help you take full advantage of

the unit’s features.

In the main part of the document, you will find a series of step-by-step

procedures for each function available.

The illustrations in the step-by-step procedures use three different symbols:

PRESS PUSH HOLD DOWN

View of the Function Controller

The function controller is an additional controller which is used with the centralized controller.

Swing button

(Except Duct Type)

Filter Sign indicator

Mode selection button

Communication error

indicator

Room number display

Test indicator

Indoor unit selection button

Test button Filter Reset button

Temperature adjustment

buttons

Removing frost indicator

(Except Cooling Only Models)

Temperature setting

Fan speed

Air flow direction

On/Off & Timer

Set/Cancel button

Fan speed adjustment

button

On/Off indicator

Operating mode

Centralized controller indicator

Note 

Test button is for your installation specialist. You must NOT press it.



After cleaning the air filter, press the filter reset button. Then the function

controller will display the FILTER SIGN indicator when the time to clean the

air filter.



Duct type air conditioner does not have function of adjusting air flow

direction. Therefore, the function is not operated even if you press the swing

button.

MCM-A100_IB_E_27317.indd 4 2007-01-31 ｿﾀﾀ・10:26:57

E-5

ENGLISH

Getting Started

You have just purchased a function controller and it has been installed by your

installation specialist.

Your user’s manual contains much valuable information on using your function

controller. Please take time to read as it will help you take full advantage of

the unit’s features.

In the main part of the document, you will find a series of step-by-step

procedures for each function available.

The illustrations in the step-by-step procedures use three different symbols:

PRESS PUSH HOLD DOWN

MCM-A100_IB_E_27317.indd 5 2007-01-31 ｿﾀﾀ・10:26:58

E-6

1Select an indoor unit you want to control by pressing

button.

Result: 

Each time you press

button, the room

number is increased by 1, and each time you

press

button, the room number is decreased

by 1 from 0~15.

2Turn the air conditioner on by pressing

(ON/OFF) button.

Result: 

The On/Off indicator on the function controller

comes on.



The air conditioner runs in the mode selected

when the unit was last used.

3Select an appropriate operating mode by pressing Mode

button.

Result:

The air conditioner runs in the selected mode.

Note

For further details on operating modes, refer to

page 7~15.

Selecting the Indoor Unit

You can control a specific indoor unit from the function controller.

MCM-A100_IB_E_27317.indd 6 2007-01-31 ｿﾀﾀ・10:26:58

E-7

ENGLISH

Selecting the Automatic Operating Mode

In the Automatic mode, the room temperature and the fan speed

are controlled automatically.

1If necessary, press

(ON/OFF) button.

Result: 

The On/Off indicator on the function controller

comes on.



The air conditioner runs in the mode selected

when the unit was last used.

Caution

The air conditioner is fitted with a protection

mechanism to prevent the unit from being damaged

when it is started immediately after being:



Plugged in



Stopped

lt will start up normally after three minutes.

2To select the AUTO mode, press the Mode button until

displayed at the top of the function controller.

Result:

The air conditioner runs in AUTO mode.

Note

You can change modes at any time.

3To adjust the temperature, press the Temperature buttons

one or more times until the required temperature is displayed.

Possible temperatures are between 18°C(65°F) and 30°C(86°F)

inclusive.

Result: 

Each time you press Temperature buttons:

- The temperature is adjusted by 1°C(1°F).



The air conditioner starts cooling, provided

that the room temperature is than the selected

temperature.

- The quantity of air is adjusted automatically.

MCM-A100_IB_E_27317.indd 7 2007-01-31 ｿﾀﾀ・10:27:00

E-8

Cooling Your Room

You must select the COOL mode if you wish to adjust the :



Cooling temperature



Fan speed when cooling

1If necessary, press

(ON/OFF) button.

Result: 

The On/Off indicator on the function controller

comes on.



The air conditioner runs in the mode selected

when the unit was last used.

Caution

The air conditioner is fitted with a protection

mechanism to prevent the unit from being damaged

when it is started immediately after being:



Plugged in



Stopped

lt will start up normally after three minutes.

2To select the COOL mode, press the Mode button until

displayed at the top of the function controller.

Result:

The air conditioner runs in COOL mode.

Note

You can change modes at any time.

MCM-A100_IB_E_27317.indd 8 2007-01-31 ｿﾀﾀ・10:27:02

E-9

ENGLISH

Cooling Your Room

3To adjust the temperature, press the Temperature buttons

one or more times until the required temperature is displayed.

Possible temperatures are between 18°C(65°F) and 30°C(86°F)

inclusive.

Result: 

Each time you press Temperature buttons:

- The temperature is adjusted by 1°C(1°F).



The air conditioner starts cooling, provided that

the room temperature is higher than the

selected temperature ; the fan will, however,

operate.

4Select the fan speed by pressing the Fan button one or more

times until the intended value is displayed :

Automatic(rotated :   )

Low

Medium

High

5To control the direction of the air flow, refer to page 15.

MCM-A100_IB_E_27317.indd 9 2007-01-31 ｿﾀﾀ・10:27:03

E-10

Heating Your Room (Except Cooling Only Models)

You must select the HEAT mode if you wish to adjust the :



Heating temperature



Fan speed when heating

1If necessary, press

(ON/OFF) button.

Result: 

The On/Off indicator on the function controller

comes on.



The air conditioner runs in the mode selected

when the unit was last used.

Caution

The air conditioner is fitted with a protection

mechanism to prevent the unit from being damaged

when it is started immediately after being:



Plugged in



Stopped

lt will start up normally after three minutes.

2To select the HEAT mode, press the Mode button until

displayed at the top of the function controller.

Result:

The air conditioner runs in HEAT mode.

Note

You can change modes at any time.

You can select the HEAT mode only in heat pump models.

MCM-A100_IB_E_27317.indd 10 2007-01-31 ｿﾀﾀ・10:27:04

Autres manuels pour MCM-A100

Table des matières

Autres manuels Samsung Contrôleurs

Samsung

Samsung MCM-A202DN Manuel utilisateur

Samsung

Samsung SCC-3100A Manuel utilisateur

Samsung

Samsung RS232C Manuel utilisateur

Samsung

Samsung RMC30D1 Manuel utilisateur

Samsung

Samsung SM-N9109W Manuel utilisateur

Samsung

Samsung SPC-2000 Manuel utilisateur

Samsung

Samsung SPC-1010 Manuel utilisateur

Samsung

Samsung MIM-H02 Mode d’emploi

Samsung

Samsung 136S Manuel utilisateur

Samsung

Samsung SSC-1000 Manuel utilisateur

Samsung

Samsung MWR-WG00JN Manuel utilisateur

Samsung

Samsung SCC-1000 Manuel utilisateur

Samsung

Samsung SCC-101 Manuel utilisateur

Samsung

Samsung MCM-C210 Manuel utilisateur

Samsung

Samsung SSA-S2101 Manuel utilisateur

Samsung

Samsung SPC-2010 Manuel utilisateur

Samsung

Samsung MCM-A100 Manuel utilisateur

Samsung

Samsung MCM-A00N Manuel utilisateur

Samsung

Samsung MWR-WE13N Manuel utilisateur

Samsung

Samsung MWR-WG00JN Manuel utilisateur

Samsung

Samsung WEC8500 Manuel utilisateur

Samsung

Samsung AC0 JNHDCH/AA Series Manuel de service

Samsung

Samsung SM-Z300H/DD Manuel utilisateur

Samsung

Samsung Function controller Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur