Ruijie RG-AP180(V3) Manuel d'installation et d'exploitation

Ruijie RG-AP180(V3) Access Point

Hardware Installation and Reference Guide

Document Version: V1.3

Date: August 16, 2023

Networks

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or

commercial use of this document or any portion of this document, in any form or by any

means, without the prior written consent of Ruijie Networks is prohibited.

Trademark and are owned by Ruijie

Networks.

All other trademarks or registered trademarks mentioned in this document are owned by

their respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and

terms. Some or all of the products, services or features described in this document may

not be within the scope of your purchase or use. Unless otherwise agreed in the contract,

Ruijie Networks does not make any express or implied statement or guarantee for the

content of this document.

Due to product version upgrades or other reasons, the content of this document will be

updated from time to time. Ruijie Networks reserves the right to modify the content of

the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy

and will not shoulder any responsibility for losses and damages caused due to content

omissions, inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: service_rj@ruijienetworks.com

Live Chat: https://www.ruijienetworks.com/rita

Conventions

1. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or

followed can result in data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed

can result in function failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or

followed will not lead to serious consequences.

Specification

An alert that contains a description of product or version support.

2. Note

The manual offers configuration information (including model, port type and command

line interface) for indicative purpose only. In case of any discrepancy or inconsistency

between the manual and the actual version, the actual version prevails.

Contents

Preface.................................................................................................................................................. I

1 Product Introduction....................................................................................................................... 1

1.1 Overview ...................................................................................................................................1

1.2 Product Appearance ................................................................................................................1

1.3 Package Contents.....................................................................................................................4

1.4 Technical Specifications...........................................................................................................5

1.4.1 Dimensions and Weight...............................................................................................5

1.4.2 Radio Specifications .....................................................................................................5

1.4.3 Port Specifications........................................................................................................7

1.4.4 Power Supply and Consumption ................................................................................7

1.4.5 Environment and Reliability ........................................................................................8

1.5 LED and Button.........................................................................................................................9

2 Preparing for Installation.............................................................................................................. 11

2.1 Safety Precautions..................................................................................................................11

2.1.1 General Safety Precautions .......................................................................................11

2.1.2 Handling Safety ..........................................................................................................11

2.1.3 Electric Safety..............................................................................................................12

2.1.4 Storage Security .........................................................................................................12

2.2 Installation Environment Requirements..............................................................................13

2.2.1 Bearing Requirements...............................................................................................13

2.2.2 Ventilation Requirements..........................................................................................13

2.2.3 Space Requirements ..................................................................................................13

2.2.4 Temperature/Humidity Requirements.....................................................................13

2.2.5 Cleanliness Requirements.........................................................................................14

2.2.6 Anti-interference Requirements ...............................................................................15

2.2.7 Installation Site Requirements..................................................................................15

2.3 Tools ........................................................................................................................................16

3 Installation ..................................................................................................................................... 17

3.1 Installation Procedure ...........................................................................................................17

3.2 Before You Begin....................................................................................................................18

3.3 Precautions.............................................................................................................................18

3.4 Installing the Device...............................................................................................................19

3.4.1 86 mm Junction Box Installation...............................................................................19

3.4.2 Removing the AP........................................................................................................22

3.5 Connecting Cables .................................................................................................................22

3.6 Bundling Cables......................................................................................................................23

3.6.1 Precautions.................................................................................................................23

3.6.2 Bundling Steps............................................................................................................23

3.7 Checklist after Installation.....................................................................................................23

3.7.1 Checking the AP..........................................................................................................23

3.7.2 Checking Cable Connections.....................................................................................23

iii

3.7.3 Checking the Power Supply.......................................................................................24

4 Verifying the Operating Status..................................................................................................... 25

4.1 Establishing the Configuration Environment ......................................................................25

4.2 Powering on the AP................................................................................................................25

4.2.1 Checklist Before Power-on ........................................................................................25

4.2.2 Checking the Environment after Power-on .............................................................25

5 Monitoring and Maintenance....................................................................................................... 26

5.1 Monitoring ..............................................................................................................................26

5.1.1 LED...............................................................................................................................26

5.1.2 CLI Commands ...........................................................................................................26

5.2 Remote Maintenance.............................................................................................................26

5.3 Hardware Maintenance .........................................................................................................26

6 Troubleshooting ............................................................................................................................ 27

6.1 General Troubleshooting Procedure....................................................................................27

6.2 Common Troubleshooting Procedures................................................................................28

6.2.1 The Ethernet Port Does Not Work After the Ethernet Cable Is Plugged in...........28

6.2.2 The LED Is Off for a Long Time .................................................................................28

6.2.3 The LED Is Solid Red...................................................................................................28

6.2.4 The LED Is Solid Green...............................................................................................28

6.2.5 The LED Keeps Blinking Green at an Interval of 0.2s for a Long Time..................28

6.2.6 The LED Keeps Blinking Red at an Interval of 1s for a Long Time .........................29

6.2.7 The Wireless Signal Cannot Be Found......................................................................29

7 Appendix ........................................................................................................................................ 30

7.1 Connectors and Media...........................................................................................................30

7.2 Cabling Recommendations in Installation...........................................................................32

7.3 DC Connector Specifications .................................................................................................37

Hardware Installation and Reference Guide Product Introduction

1 Product Introduction

1.1 Overview

The RG-AP180(V3) is a dual-band 802.11ax-compliant access point (AP) released by Ruijie

Networks for indoor scenarios in the general education, higher education, hotel, office

and dormitory. With simple and beautiful appearance design, the RG-AP180(V3) can be

deployed without damaging the wall decoration. It is the optimal choice for wireless

network deployment in hotels and dormitories.

The AP adopts the latest 802.11ax protocol and dual-band technology. The 2.4 GHz Radio

Frequency Processing Unit (RPU) provides a maximum access rate of 574 Mbps, and the

5 GHz RPU provides a maximum access rate of 2.402 Gbps. In this way, this AP can

provide a maximum access rate of 2.976 Gbps, which eliminates the bottleneck in

wireless performance. The RG-AP180(V3) provides five wired ports, including four 1000

Mbps LAN ports and one 1000 Mbps uplink port, for wired access. The design of the AP

considers factors such as wireless network security, radio control, mobile access, Quality

of Service (QoS), and seamless roaming. Working with Ruijie wireless access controllers

(AC), the AP implements user data forwarding, security, and access control.

The RG-AP180(V3) supports local power supply and power over Ethernet (PoE).

Customers can flexibly select the power supply mode based on the site environment.

1.2 Product Appearance

The RG-AP180(V3) has two RF ports and five Ethernet ports. The Ethernet ports on the

rear support 802.3af/at-compliant PoE. It also has one micro USB console port, one DC

power port used to connect with the external power supply, and one reset button. The

following figures show the product appearance.

Hardware Installation and Reference Guide Product Introduction

Figure 1-1Front View

Figure 1-2Left Side View

Table des matières

Autres manuels Ruijie Point d'accès sans fil

Ruijie

Ruijie RG-MAP852-SF-M Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP530-I V2 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-RAP6262 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-SAP685-SP Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP630 Directional Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP130(L) Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP680-O Manuel utilisateur

Ruijie

Ruijie RG-AP110-L Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP880-L Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP520 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-RAP6260 Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-SAP845-SP Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-RAP2260 Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AM5528-SF Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-RAP73HD Manuel utilisateur

Ruijie

Ruijie RG-AP210-L Series Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-RAP1200-MNT Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP840-I Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-EAP602 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee Series Manuel utilisateur

Ruijie

Ruijie RG-WLAN Series Manuel d'installation

Ruijie

Ruijie Reyee RG-RAP6202(G) Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-AP680P-L Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-WLAN Series Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur