Rosewill RX32 Manuel utilisateur

On connecting the device, make sure the device is located at least one meter away from sources

of high frequence and magnetic disturbance(TV, Speaker, Mobile Telephone etc) in order tp

avoid data loss and operational problems.

Every time you update your data make back-up copies on the external storage medium. We do

not assume liability for data loss or damage to data storage unit, and no claims can be accepted

for daages resulting from loss of data or consequential losses.

Before you cleaning the device make sure all the plug is pulled out from connection cables. Do

not use any corrosive, solvents or gaseous cleaning product.

Package of Content

3.5" aluminum external enclosure.

Power adapter.

USB 1.1/2.0 connection cable.

IEEE 1394 connection Cable.(1394 + USB model only)

User's Guide.

Driver CD for WIndows98SE (USB mode only)

Screw TP 3 * 8 mm 2pcs for real panel.

Screw flat head M6#6 mm 4pcs for hand disk drive.

Screw flat head M 3*4 mm 4pcs for MO drive.

Ruber feet for lying down 4pcs.

Ruber stand for straight up 2pcs.

Ruber for real panel screw hole 2pcs

System Requirements

PC/AT compatible computer

Pentium class processor above 200MHz

Windows98SE, 2000, ME & XP

LINUX OS kernel 2.4.0 or later

64MB Memory or more

USB 1.1/2.0 and 1394 Interface

Apple Mac computer

G4 processor above 300MHz

OS 9.0 or later

64MB memory or more

USB1.1/2.0 and 1394 interface

The way to install the HDD/MO

Please set the Device as "Master Device"

How to set the ATA/ATAPI as Master, please reference your HDD or MO

user guide Usually the device is set at "Master" mode when delivering from

Factory. But once device connected with computer, the setting is possible

changed. So this should be noticed.

(Attention) Thisis just an example, the exact setting of the HDD please

reference your HDD user's guide.

setting

1. Remove the rear panel and

take out the device frame.

The frame will slide

out while the rear panel is

taken off.

Carefully.

2. Connect IDE cable and power cable.

Caution:

Never insert power cable

on reverse, otherwise ,

drive may be fail. (Warranty

DOES not cover such damage)

3. Secure your HDD/MO drive on the

frame of the enclosure with the attached screws.

Flat head 6#6 screws are used for HDD.

Flat head M3*4 screws are used for MO.

4. Push the frame kit with device into the

3.5"aluminum case.

Aline the frame kit into the guide of case as

the right picture showing, and push the

frame kit slowly into the case.

The device needs to be set at " Master" (example) IBM HDD situation.

5. Using the attached two screws TP 3*8 to

secure the rear panel, and cover the screw

hole with the rubber for the screw hole.

6. If you like to use the enclosure at lying down position. Please! use the rubber

stand for lying down and assembly the rubber stand as the following figure.

7. If you like to use the enclosure at vertical position. Please! Use the rubber

stand for tand up and assembly the rubber stand as the following figure.

USBUSB 13941394 13941394

DC INDC IN

Connection description for 3.5"

Combo aluminum case

Connection for USB 1.1/2.0

Connection for IEEE 1394 4 pole

Power on-off switch

Connection for IEEE 1394 6 pole

Connection for DC power adapter

Part's Name and Description

Connection description for 3.5"

USB aluminum case

Connection for USB 1.1/2.0

Power on-off switch

Connection for DC power adapter

USBUSB

DC INDC IN

Status LED:

Green color: deviceat stand by

mode.

Orange Color: deviceat active

mode.

Status LED

Using with the PC

1. Start your computer and wait until Windows has been loaded.

2. Turn on the power of enclosure. (The LED turns from orange to

green as soon as the device (HDD/MO) is ready)

3. Connect the USB or 1394 cable from the enclosure to corresponding

port of your computer.

4. Windows Me/2000/XP recognize the connected the enclosure automatically.

5. If you are using USB mode at the win98SE, you need to install the device driver.

Using the attached driver's CD and follow the instruction on the screen to install

the USB device driver. The driver software is located at the D:\USB20\WIN98,

which "D:" is the drive letter of CD-ROM drive which contain the device driver CD.

6. Before you unplug or turn off the power of enclosure while the

Windows is running, Please! Disable the connection from the "safe remove utility"

which is located at the task bar.

3.5"

Using with the MAC's computer

1. Start your computer and wait until OS has bean loaded.

2. Turn on the power of enclosure. (The LED turns from orange to

green as soon as the device (HDD/MO) is ready)

3. Connect the USB or 1394 cable from the enclosure to the

corresponding port of your computer.

4. MAC recognizes the connected enclosure automatically.

5. Before you unplug or turn off the power of enclosure while the

MAC's computer is running, Please! Drag the icon into the trash before

remove the enclosure .

3.5"

Partitioning the Hard Disk

With the Windows 2000/XP use the Disk Management program to install your disk.

This program is located at Computer Management. Please! Reference the following

figure.

With Windows 98SE/Me the hard disk is installed with the DOS program FDISK.EXE

Look WINDOWS help for detail on using the programs.

MCAUTION! Partitioning and formatting a disk drive will delete the data in the HDD.

We assume NO responsibility for lost data.

Table des matières

Autres manuels Rosewill Enceinte

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

Rosewill

Rosewill 5600 Series Manuel utilisateur

Rosewill

Rosewill RX355-U Manuel utilisateur

Rosewill

Rosewill RX-C202 Manuel utilisateur

Rosewill

Rosewill RX81U-MP-25A-S/B Manuel utilisateur

Rosewill

Rosewill RX35-AT-SC BLK Manuel utilisateur

Rosewill

Rosewill CHALLENGER-S Manuel utilisateur

Rosewill

Rosewill RX30 Instructions d'installation et d'utilisation

Rosewill

Rosewill CHALLENGER-U3 Manuel utilisateur

Rosewill

Rosewill CULLINAN V Series Manuel utilisateur

Rosewill

Rosewill FBM-05 Manuel utilisateur

Rosewill

Rosewill PRISM M Manuel utilisateur

Rosewill

Rosewill RX 304-PU3-35B Manuel utilisateur

Rosewill

Rosewill Lineom Manuel utilisateur

Rosewill

Rosewill RX35-AT-IU BLK Manuel utilisateur

Rosewill

Rosewill STEALTH Manuel utilisateur

Rosewill

Rosewill RX20-U2 Manuel utilisateur

Rosewill

Rosewill CASE 6A Series Manuel utilisateur

Rosewill

Rosewill NEUTRON Manuel utilisateur

Rosewill

Rosewill THRONE Manuel utilisateur

Rosewill

Rosewill SCM-01 Manuel d'instructions

Rosewill

Rosewill RDEE-12002 Manuel utilisateur

Rosewill

Rosewill PRISM S500 Manuel d'instructions

Rosewill

Rosewill FB-03 Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur

NewerTech

NewerTech Voyager S3 Manuel utilisateur