Rollei Actioncam 430 Manuel utilisateur

ACCESSORIESTHE BASICS

Power/Mode Button

Micro USB

Port

HDMI

MicroSD Slot

Status Screen

Microphone

Speaker Shutter/Select Button

Screen

Wi-Fi Button

Waterproof

Housing

USB cable

Safety Pad Curved

with 3M sticker Adaptor Adaptor Quickshoe Mount

Battery Manual Safety Pad Flat

with 3M sticker

Camera

Frame Holder Protective Backdoor

Mount Basic with

2 component screw

GETTING STARTED

OVERVIEW

Video Photo Burst Photo Time Lapse Video Playback,

Photo Playback,

& Settings

ROLLEI ACTIONCAM 430

Before using the Rollei Actioncam 430, please

ensure you read and understand the safety

precautions.

-Do not attempt to open the case of the camera

or modify it in any way. If the camera has been

opended, the warranty will be void. Maintenance

and repairs can only be performed by Rollei.

-Keep the camera away from water and other

liquids (unless used in the waterproof case).

-Do not handle the Rollei Actioncam 430 with wet

hands (unless used in the waterproof case).This

may cause the camera to malfunction.

Recharge the battery using the micro USB

connector.

-Any variation to voltage or current will cause the

camera to fail.

-The Rollei Actioncam 430 should not be used in

heat exceeding 60 C (140F), or cold below -15C

(5F).

-Do not drop the Rollei Actioncam 430.

-Avoid placing heavy objects on the Rollei

Actioncam 430.

-Do not dispose of this unit in domestic waste.

This user manual will help you learn the basics

of capturing life’s most incredible moments!

To power ON:

Press the Power/Mode Button.

To power OFF:

Press and hold the Power/Mode Button.

Turn the camera ON and press the Power/Mode

Button repeatedly to cycle through the camera

modes and settings. The modes will appear in the

following order:

Video

Photo

Burst Photo

Time Lapse

Record Video

Capture a single photo.

Capture photo bursts

Shoot a series of photos

at set time intervals

Video & Photo plackback

Adjust camera settings,

resolution and more.

SETTINGS

4k30/2k60/1080p120/1080p60/1080p30/720p200

Snow Mode: On/Oﬀ

Photo Resolution: 12M/8M

Video Interval: 1 Min/ 5 Min

Looping Video: Oﬀ/On (4K & 2K not supported)

Time Stamp: Oﬀ/Date/Date & Time

Exposure: +-2.0/+-1.7/+-1.3/+-1.0/+-0.7/+-0.3/0

Burst Mode: 3 Photos/ 1S, 7 Photos/ 2S, 15 Photos/

4S, 30 Photos/ 8S

Time Lapse Interval: 3s/5s/10s/30s/60s

Time Lapse: Oﬀ/On

Power Frequency: 50Hz/60Hz/Auto

Language: English/Chinese/Traditional Chinese/

Italian/Spanish/Portuguese/German/Dutch/

French/Czech/Danish/Swedish/Norwegian/

Slovakia/Greece/Finnish/Hungarian

Date & Time: MM/DD/YY, DD/MM/YY,

orYY/MM/DD

Sound Indicator: Shutter On/Oﬀ, Start Up

1/2/3/None, Beep On/Oﬀ,Volume 0/1/2/3

Press the Shutter/Select Button to enter the

settings menu. Repeatedly press the Power/Mode

Button to cycle through options and press the

Shutter/Select Button to select desired option. To

go back to the previous screen or exit the settings

menu, press the Wi-Fi Button.

MicroSD Card 1080p60

120 mins 60 mins

120 mins

240 mins

4k30/2k60

80 mins

160 mins

1080p120/720p200

32 GB

64 GB

Photo

Burst Photo

Video

VIDEO MODE

PHOTO MODE

BURST PHOTO MODE

Screen Saver: Oﬀ/1 min/3 min/5 min

Power Saver: Oﬀ/1 min/3 min/5 min

Format: No/Yes

Reset: No/Yes

Version

To record Video, verify the camera is in Video

mode. If the Video icon on your camera’s LCD

screen is not showing, press the Power/Mode

Button repeatedly until it appears.

To start recording:

Press the Shutter/Select Button. The camera will

emit one beep and start recording.

To stop recording:

Press the Shutter/Select Button. The Camera

emits one beep to indicate recording has stopped.

This camera automatically stops recording when

the battery is out of power.Your Video will be

saved before the camera powers OFF.

To capture a Photo, verify the camera is in Photo

mode. If the Photo icon on your camera’s LCD

screen is not showing, press the Power/

Mode Button repeatedly until it appears.

To take a photo:

Press the Shutter/Select Button. The camera will

emit the camera shutter sound.

To capture a Burst Photo series, verify the camera

is in Burst Photo mode. If the Burst Photo icon on

your camera’s LCD screen is not shown, press the

Power/Mode Button repeatedly until it appears.

In Burst Photo mode, your camera takes 3

photos/1 sec, 7 photos/2 sec, 15 photos/4 sec, or 30

photos/8 sec.

To take a Burst Photo series:

Press the Shutter/Select Button. The camera will

emit camera shutter sounds.

Time Lapse

TIME LAPSE MODE

PLAYBACK

BATTERY

For charging the battery, we recommend to use an

USB charger with 1.5A charging current.

*Charging Time: 3 hours.

*You can NOT record or take photos while charging

the camera.

To charge the battery

To capture a Time Lapse series, verify the Time

Lapse is ON and camera is in Time Lapse mode. If

the Time Lapse icon on your camera’s LCD screen

is not shown, press the Power/Mode Button

repeatedly until it appears. In Time Lapse mode,

your camera captures a series of photos at

3,5,10,20,30 or 60 second intervals.

To take Time Lapse:

Press the Shutter/Select Button. The camera

initiates a countdown and emits the camera

shutter sound each time a Photo is taken.

To enter the Playback menu:

1.Press the Power/Mode Button

to select Video or Photo.

2.Press the Shutter/Select Button to enter

the Playback menu.

3.Use Power/Mode Button to cycle through

the various options.

4.Press the Shutter/Select Button.

5.To return to the Playback menu, press

the Wi-Fi Button.

Playing Back Videos and Photos Photo Button

Video Button

2.4G Remote

*Splashproof

Remote Distance: 8m/26ft

Rollei 430 App video formats:

4K30/2K50/1080p100/1080p60/720p120

(The Rollei 430 App does NOT support

2K60/1080p120/720p200 formats of your camera.

Therefore, you can’t see these formats on the app. )

The Rollei 430 App lets you control your camera

remotely using a smartphone or tablet. Features

include full camera control, live preview, photo

playback and sharing of select content and

more.

CAMERA APP

Connecting to the Rollei 430 App

To record Video, verify the camera is in Video mode.

Video

To capture a Photo, verify the camera is in Photo mode.

To start recording:

Press the Video Button. The camera will emit one

beep and the Camera Light will ﬂash while

recording.

To stop recording:

Press the Video Button again. The camera will emit

one beep and the Camera Light will stop ﬂashing

while recording.

To take a photo:

Press the Photo Button. The camera will emit a

camera shutter sound.

To capture a Burst Photo series, verify the camera is

in Burst Photo mode.

To take a Burst Photo series:

Press the Photo Button. The camera will emit

camera shutter sounds.

To capture a Time Lapse series, verify the Continuous

Lapse is ON and camera is in Time Lapse mode.

To take Time Lapse:

Press the Photo Button. The camera initiates

countdown and emits a camera shutter sound each

time a Photo is taken.

*To power OFF camera:

Press and hold the Photo Button.

Photo

Burst Photo

Time Lapse

Press the Shutter/Select Button to enter the

settings menu. Repeatedly press the Power/-

Rollei 430 App video formats:

4K30/2K50/1080p100/1080p60/720p120

(The Rollei 430 App does NOT support

2K60/1080p120/720p200 formats of your camera.

Therefore, you can’t see these formats on the app. )

The Rollei 430 App lets you control your camera

remotely using a smartphone or tablet. Features

include full camera control, live preview, photo

playback and sharing of select content and

more.

The Rollei 430 App is compatible with

smartphones and tablets listed below.

For Apple iOS

* iPhone6 (Plus) & 6s (Plus) (iOS9)

* iPad Air & Mini (iOS9)

For Android:

* Android 4X Quad-core devices

STORAGE/MICROSD CARDS

This camera is compatible with 32GB and 64GB

capacity microSDXC memory cards. Be sure to use a

microSDXC card with at least a U3 (90MB/s) speed

rating and format your card using the camera before

ﬁrst use.

1. Download the Rollei 430 App to your

smartphone or tablet at the Google Play or

Apple App Store.

2. Press the Power/Mode Button to power

camera ON.

3. Make sure the camera is in Camera modes.

4. Press the Wi-Fi Button to turn on Wi-Fi*.

5. In your smartphone or tablet’sWi-Fi settings,

connect to the network called “Rollei430”

followed by a series of numbers.

6. Open the Rollei 430 App on your smartphone

or tablet.

* Press and hold the Wi-Fi Button for three seconds

to turn OFF Wi-Fi.

* Compatibility varies by device. Content playback,

sharing and access to the camera's memory card

might be not available on some devices.

COMPATIBILITY

Your camera’s date and time are automatically set

when you connect your camera to the Rollei 430 App.

If the battery is removed from the camera, you must

reset the date and time (automatically or manually).

SET THE DATE/TIME

We strongly recommend only purchasing

name brand cards through oﬃcial resellers.

The cards below are known to work well with

this camera.

Sandisk Extreme microSDXC U3 64GB

Sandisk Extreme microSDHC U3 32GB

Sandisk Extreme PRO microSDXC U3 64GB

Sandisk Extreme PRO microSDHC U3 32GB

Transcend Ultimate 633x microSDXC U3 64GB

Transcend Ultimate 633x microSDHC U3 32GB

Samsung Pro microSDXC U3 64GB

Samsung Pro+ microSDXC U3 64GB

MICROSD CARD CONSIDERATIONS Note: You will ﬁnd the manual in the following

languages online on www.rollei.com:

German/English/French/Italian/Spanish/Portu-

guese/Finnish/Danish/

Swedish/Norwegian/Czech/Hungarian/

Dutch/Slovakia/Greek

430

Table des matières

Autres manuels Rollei Caméra d'action

Rollei

Rollei Actioncam 7s Plus Manuel utilisateur

Rollei

Rollei Actioncam 11s Plus Manuel utilisateur

Rollei

Rollei 410 Manuel utilisateur

Rollei

Rollei AC 420 Manuel utilisateur

Rollei

Rollei Actioncam 300 Manuel utilisateur

Rollei

Rollei Actioncam 5s Plus Manuel utilisateur

Rollei

Rollei Actioncam 400 Manuel utilisateur

Rollei

Rollei Actioncam 372 Manuel utilisateur

Rollei

Rollei Actioncam 5s Plus Manuel utilisateur

Rollei

Rollei ACTIONCAM 425 Manuel utilisateur

Rollei

Rollei Actioncam 6s Plus Manuel utilisateur

Rollei

Rollei Actioncam 9s Plus Manuel utilisateur

Rollei

Rollei ActionCam S-50 WiFi Manuel utilisateur

Rollei

Rollei Action Cam 100 Manuel utilisateur

Rollei

Rollei Actioncam 6s Plus Manuel utilisateur

Rollei

Rollei Actioncam 8s Plus Manuel utilisateur

Rollei

Rollei Actioncam 333 Manuel utilisateur

Rollei

Rollei Actioncam 8s Plus Manuel utilisateur

Rollei

Rollei ACTIONCAM 425 Manuel utilisateur

Rollei

Rollei 4s Plus Manuel utilisateur

Rollei

Rollei 4s Plus Manuel utilisateur

Rollei

Rollei Action Camera 230 Manuel utilisateur

Rollei

Rollei Actioncam 9s Plus Manuel utilisateur

Rollei

Rollei Actioncam 560 Touch Manuel utilisateur

Manuels Caméra d'action populaires d'autres marques

Epic

Epic STC-EPC1T Manuel utilisateur

Brinno

Brinno MAC200 DN Manuel utilisateur

GoPro

GoPro HERO5 Manuel utilisateur

ION

ION Air Pro 2 Manuel utilisateur

Firefly

Firefly 6s Manuel utilisateur

Omni

Omni HERO4 Manuel utilisateur

nedis

nedis ACAM41BK Manuel utilisateur

MOFILY

MOFILY YOCAM Manuel utilisateur

ZERO-X

ZERO-X ZX-10 Manuel utilisateur

Pyle

Pyle eXpo PSCHD90 Manuel utilisateur

Action Camera

Action Camera AC32 Manuel utilisateur

Midland

Midland XTC300 Manuel utilisateur

Movii

Movii QC-8075 Manuel utilisateur

Coleman

Coleman C5WP Xtreme Manuel utilisateur

MCM Electronics

MCM Electronics 82-19749 Manuel utilisateur

Aim

Aim SmartyCam 3 Sport Manuel utilisateur

Naxa

Naxa NDC-409 Manuel utilisateur

Panasonic

Panasonic HX-A1M Manuel utilisateur