Roland TruVis SG Manuel utilisateur

Roland TruVis SG/VG

SUMMER STORAGE REQUIREMENTS

320 E. 3rd Ave., Tarentum, PA 15084 724-230-2400 or 800-232-7600 www.alleghenyedusys.com Page | 1

TO DO before leaving your Roland Printer/Cutter Unattended for an

extended break (more than 2 weeks)

1. The Roland vinyl printer/cutter machines are precise devices that require proper care

in order to maintain accuracy and functionality – which includes performing a head

wash procedure during extended downtime.

2. Be sure tohave at least the minimum number ofcleaning cartridges necessary to

perform the head wash and to re-ink the machine when you return in the Fall.

3. Be sure to empty your drain bottle prior tostarting the process. Removing ink from

the lines does usea significant amount ofdrain space, and the bottle cannot be

emptied during the head wash process.

4. Be sure todispose of your drain bottle/cartridges properly, adhering to local guidelines.

PERFORM A HEAD WASH PROCEDURE:

1. Follow the instructions on the following page to perform a head wash on your printer.

2. The process does take time, so give yourself an hour or two to complete the procedure.

The overall time will depend on your machine model and dedicated time in front ofthe

unit.

3. After the head wash is complete, store your ink cartridges on a level surface, and

within a regulated temperature/humidity environment.

4. Remove any media from the roller, cover any open media rollstoprevent dust buildup.

5. Turn off the printers Sub Power and Main Power Switch on the back ofthe Printer.

6. Unplug the Printer.

Please remember that failure to do a head wash will cause ink-build up in the system and

could cause problems when returning in the Fall or shortly thereafter. These storage

related issues may not be covered under your machines warranty/extended warranty

If you have any questions regarding this process, you can email

[email protected], or call us at 800-232-7600.

Please put a copy of these instructions with the machine as a reminder.

This will help avoid extra repairs, service calls, jams, malfunctions, and other performance issues.

SG Series: Head Wash Procedure

SG-Series Head Wash

Notice: All ink is discharged during this operation. This procedure should only be performed by, or under the

guidance of an authorized Roland service agent.

Before You Begin

This procedure will require two (2) TR-CL cleaning cartridges and will take approximately 1 hour.

Perform a manual cleaning and replace worn consumables such as wipers. See User Manual.

Entering Service Mode

1. Turn the main power on and the Sub Power off.

2. Using the arrow keys enter the sequence below:

3. Now press and hold down the Left, Down, and Right arrow keys while pressing the Sub Power key. The

machine will power on in Service Mode and display the SETUP prompt.

SG Series: Head Wash Procedure

Performing Head Wash

1. From the SETUP prompt press [MENU]

2. Press the left arrow key to enter the service menu. Press the down arrow key until SUB MENU appears.

Press the left arrow to enter the SUB MENU.

3. Press the left arrow to enter the SUB MENU. Press the down arrow until HEAD WASH appears.

4. Press [ENTER] to begin the head wash process.

5. Empty drain bottle when prompted and press [ENTER]. DO NOT SKIP THIS STEP

6. When prompted to [REMOVE CARTRIDGE 1,2,3,4]. Remove all 4 cartridges.

7. Replace any two ink pouches with the TR-CL cleaning liquid pouches.

8. When prompted to [SET CL-LIQUID 1, 3] insert the TR-CL pouches you prepared earlier into slots 1 and

SG Series: Head Wash Procedure

9. When prompted to [REMOVE CL-LIQUID 1 3] pull the 2 TR-CL pouches out just enough to disengage.

You do not have to completely remove the ink trays.

10. When prompted to [SET CL-LIQUID 1, 3]. Gently push the ink trays back into place until they engage.

The [WASHING HEAD] prompt will display. This process will repeat between 3 and 7 times.

11. Once the ink lines for channels 1 and 3 have been cleaned, the LCD display will prompt you to move

the ink trays currently in channels 1 and 3 to channels 2 and 4 which are the MG and BK channels. The

same series of prompts will display for channels 2 and 4 that occurred for channels 1 and 3.

12. At the end of the process you will be prompted to [REMOVE CL-LIQUID 2, 4] and to again [EMPTY

DRAIN BOTTLE] DO NOT SKIP THIS STEP. Empty the drain bottle and press [ENTER].

13. The LCD display will default back to the [SUB MENU/HEAD WASH] prompt. DO NOT PRESS ENTER. Turn

off the sub power on the control panel as well as the main power at the rear of the machine. The

HEAD WASH process has now been completed.

Please consult the applicable setup guide when returning the printer to service.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Roland Imprimante

Roland

Roland Versa UV LEF-12 Manuel utilisateur

Roland

Roland VS-540i Manuel utilisateur

Roland

Roland XC-540W Manuel utilisateur

Roland

Roland VersaArt RE-640 Manuel utilisateur

Roland

Roland SOLJET PROIII XC-540 Manuel utilisateur

Roland

Roland VersaUV LEC2-300 Manuel utilisateur

Roland

Roland PR-1111 Manuel utilisateur

Roland

Roland VersaUV LEF2-300 Manuel utilisateur

Roland

Roland TrueVIS AP-640 Manuel utilisateur

Roland

Roland EU-1000MF Manuel utilisateur

Roland

Roland CAMM-2 PNC-2300 Manuel utilisateur

Roland

Roland FLATJET FLJ-300 Manuel utilisateur

Roland

Roland FJ-50 Manuel utilisateur

Roland

Roland Metaza MPX-60 Manuel utilisateur

Roland

Roland SOLJET PROIII XC-540 Manuel utilisateur

Roland

Roland TrueVIS SG3-540 Manuel utilisateur

Roland

Roland VersaStudio BN-20 Manuel utilisateur

Roland

Roland VS-640 Manuel utilisateur

Roland

Roland iModela iM-01 Manuel d'utilisation et d'entretien

Roland

Roland VersaUV LEF2-200 Manuel d'utilisation

Roland

Roland VersaUV LEJ-640 Manuel utilisateur

Roland

Roland CJ-540 Manuel utilisateur

Roland

Roland DU2-64 Manuel utilisateur

Roland

Roland Raven PR-2417 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur