Riva RC4202HD Manuel utilisateur
1
www.rivatech.de
Quick Installation Guide
This manual provides instructions for quick installation and basic configuration of your IP device.
2
www.rivatech.de
Step1. Connect cables to IP device
Connect required cables to the device including the power cable and LAN cable. To see the
correct positions of all connectors, refer to the following image below.
Incorrect connection may cause malfunction or damage to the IP device.
Caution
!
* Model design and appearance are subject to change without any prior notice
6-pin
Terminal
Connect
(Digital Out)
3.5 mm Microphone
Stereo Jack
3.5 mm Speaker
Stereo Jack
Video Out
32-pin socket
MicroSD slot
PCB Top View
Main Camera Body Top View
LAN Cable
3-pin Power
Terminal Connect
③
8-pin
Terminal
Connect
(Digital In)
3
www.rivatech.de
Step2. Install IP device
1) Secure three screws inside a PCB board
shield’s three unit holders with metal rings
attached in the end.
2) Connect all necessary cables to a PCB
board before attaching the shield to an
installation spot.
3) Under the PCB board shield has a 32-pin
connector which matches the main camera
body’s 32-pin socket; The shield’s three unit
holders also align with the main camera
body’s three unit holder holes.
4) Once cable connect is complete along
with brackets and poles on an
installation spot, hook the roll-up string
that is attached to a board shield to the
main body. Main body has a secured
string holder hole.
5) Align the connector and socket, and then
push the main body to conjoin.
6) Once two units are attached, rotate the
main camera body counterclockwise to
secure the lock.
To prevent products from damaging, place the camera on stable and non-
vibrating surfaces. If the stability is in doubt, consult with safety personnel for
reinforcements, and then proceed with the installation.
Caution
!
Roll-up
String hole
32-pin socket
4
www.rivatech.de
Step3. Set the lens position
The device is 360° rotating camera and fully controlled by web user interface.
Once the unit’s installation is complete and connected properly, please refer to RIVA Web
Interface Manual Full HD Series for the device’s PAN/TILT configuration instructions.
Step4. Set up network environment
The default IP address of the device is 192.168.XXX.XXX. Users can identify the IP address of
the device from converting the MAC address’s hexadecimal numbers, which is attached to the
device. Be sure that the device and PC are on a same area network before running the
installation.
Generic IP Environment
In case of generic private network environment where IP address 192.168.XXX.XXX are
used, users may view the live streaming images on a web page using the device’s default IP
address:
1. Convert the device’s MAC address to the IP address. Refer to the Hexadecimal-Decimal
Conversion Chart at the end of the manual.
(The MAC address of the device is attached on the side or bottom of the device.)
MAC address = 00-13-23-01-14-B1 →IP address = 192.168.20.177
Convert the last two set of hexadecimal numbers to decimal numbers.
5
www.rivatech.de
2. Start the Microsoft® Internet Explorer web browser and enter the IP address of the device.
3. Web streaming and device configurations are supported through ActiveX program. When
the ActiveX installation pop-up window appears, authorize and install the ActiveX setup.exe,
Custom IP Environment
IPAdminTool and the manual are provided on www.rivatech.de homepage.
IPAdminTool is a management tool, which automatically scans all of the network products for
users to perform administrative tasks, which includes network configurations, firmware update,
device reboot, and device organizations.
To modify the device’s default IP address for customized network area;
1. Find the device from the IPAdminTool’s list and highlight the device’s name.
2. Right-click the mouse and select “IP Address”; IP Setup window appears.
6
www.rivatech.de
3. In the IP Setup’s window, information under ‘Local Network information’ displays the
user/PC’s network area information. Those information need to be incorporated to the IP
Address, Subnet Mask, Gateway, and DNS boxes, except the last 2 sets of IP Address,
which are to be the unique numbers for the device. Refer to the image above for the
setting
4. Click ‘Setup’ to complete the modification. When the dialog box appears to request user
name and password, enter the default value for the administrator account (case-sensitive)
as:
ID:
root
Password:
pass
PC environment Info
Give new unique IP address in
last two sets and mirror other
information in other boxes
7
www.rivatech.de
Step5. View video on web page
Once the device’s proper IP address has been identified, type the URL in a web browser to
access the camera. At first time access, installation window may pop up. The default
username and password is
root / pass
.
1. When the browser asks to install the AxUMF software, click Install to proceed.
2. Setup.exe installation link or pop-up window appears, depends on Microsoft®
Internet Explorer version. Proceed with rest of setup installation.
8
www.rivatech.de
3. When Setup installation pop-up window appears, click install to proceed with
rest of installations.
Depends on system OS and Internet Explorer version, Installation experience may
differ from one another. Figures described above are from Windows 7, Internet
Explorer 9 environment.
Note
i
9
www.rivatech.de
Rebooting
Perform the following procedures to reset your device:
1. Press the Reset button for 2 seconds.
2. Wait for the system to reboot.
Resetting to the Factory Default Settings
Resetting the device back to the factory default will initialize all parameters including the IP
address back to the factory defaults. To reset back to the factory default;
1. Press reset button and hold.
2. Release the button after 5 seconds.
3. Wait for the system to reboot.
Reset Button Location
10
www.rivatech.de
The factory default settings can be inferred as follows:
More Information
To learn more about using other features of your devices, refer to the manuals as “RIVA
Web Interface Manual Full HD Series” or “VCAsys Online Help”, which is available on
www.rivatech.de homepage.
IP address: 192.168.xx.yy
Network mask: 255.255.0.0
Gateway: 192.168.0.1
User ID: root
Password: pass
Autres manuels pour RC4202HD
1
Table des matières
Autres manuels Riva Caméra de sécurité
Riva
Riva RC5502HD-6415-05 Manuel utilisateur
Riva
Riva RC5510 Manuel utilisateur
Riva
Riva RC362HD-6211IR Manuel utilisateur
Riva
Riva RC5510 Manuel utilisateur
Riva
Riva RC3302HD-5344 Manuel utilisateur
Riva
Riva RC6702HD-6211 Manuel utilisateur
Riva
Riva RC4202HD Manuel utilisateur
Riva
Riva RC4602SV01-2017-A Manuel utilisateur
Riva
Riva RC3702HD-5314 Manuel utilisateur
Riva
Riva RC3102HD-5311 Manuel utilisateur
Riva
Riva RC3500 Manuel utilisateur
Riva
Riva RC3502HD-5311 Manuel utilisateur
Riva
Riva RC3402HD-6211R Manuel utilisateur
Riva
Riva IPX5502HD-6415-05 Manuel utilisateur
Riva
Riva RC6702SV-7311 Manuel utilisateur
Riva
Riva RC3502HD-5311IR Manuel utilisateur
Riva
Riva RC6702SV-7311 Manuel utilisateur
Riva
Riva RC4100-1212-27 Manuel utilisateur
Riva
Riva RC3402HD-6311IR Manuel utilisateur
Riva
Riva RC8102HD-6111T Manuel utilisateur
