Riva RC3102HD-5311 Manuel utilisateur
1
www.rivatech.de
Quick Installation Guide
This manual provides instructions for quick installation and basic configuration of your IP device.
2
www.rivatech.de
Step1. Connect cables to IP device
Connect required cables to the device including the power cable and LAN cable. To see the
correct positions of all connectors, refer to the following image below.
The device is polarity sensitive. Incorrect power
connection may cause malfunction or damage to
the IP device.
Caution
!
Power Adaptor Connector (DC
12V)
* Model design and appearance are subject to change without any prior notice.
LAN
Cable
Output Configuration
buttons
Reset
Button
Power Cable
With PAL, NTSC
button
Clamping
Core
Clamping
Core
*This uses to prevent
electromagnetic
interference
*Reset and PAL/NTSC buttons are located under PCB.
Camera
from
vertical view
*Pressing the button
cycles through PAL,
NTSC, and no video
output mode:
No video
output -> PAL->NTSC
.
Video out is used only for
installation and works for
3 minutes when
PAL/NTSC button is
pushed.
3
www.rivatech.de
Step2. Install IP device
1) Place the installation template
(paper) that is included in the
package on the desired installation
surface.
2) Drill three holes in correct
positions based on the template
paper, and insert anchor blocks
into the holes.
3) Place the camera body and
match three alignment holes with
three anchor blocks. Fasten the
camera with screws.
4) Connect all the required cables
to the camera.
5) Adjust the lens position by referring
to the
Step 3. Set the lens position
6) Place the dome cover on the
main body of the camera. Dome
cover has three alignment holes
that match camera body’s
alignment holes.
7) Once properly placed, insert
alignment screws into the three
holes of the body and fasten them
up.
When assembling the main body of the camera and its dome cover,
make sure they fit each other into place.
To prevent products from damaging, place the camera on stable and non-
vibrating surfaces. If the surface is unstable, consult with safety personnel
for reinforcements first, and then proceed with the installation.
Caution
!
4
www.rivatech.de
Step3. Set the lens position
1) Remove the dome cover.
2) Adjust the lens to the desired position by manually moving its reinforced body,
upper lens shell, or horizontal platform in the following directions.
Connect to the web page of the device to see its real-time image. Refer to
step
6.
Configuration
for details about using its web page.
3) Configure each setting of 6 buttons as below.
B. Pan the lens with
reinforced lower body
C. Tilt the lens with
horizontal platform
A. Rotate the lens
with upper lens shell
SW1
SW2
SW3
PAL/NTSC
TELE
WIDE
SW4
SW5
SW6
FAR
NEAR
Auto-
Focus
5
www.rivatech.de
Step4. Set up network environment
The default IP address of the device is 192.168.XXX.XXX. Users can identify the IP address of
the device from converting the MAC address’s hexadecimal numbers, which is attached to the
device. Be sure that the device and PC are on a same area network before running the
installation.
Generic IP Environment
In case of generic private network environment where IP address 192.168.XXX.XXX are
used, users may view the live streaming images on a web page using the device’s default IP
address:
1. Convert the device’s MAC address to the IP address. Refer to the Hexadecimal-Decimal
Conversion Chart at the end of the manual.
(The MAC address of the device is attached on the side or bottom of the device.)
2. Start the Microsoft® Internet Explorer web browser and enter the IP address of the device.
3. Web streaming and device configurations are supported through ActiveX program. When
the ActiveX installation pop-up window appears, authorize and install the ActiveX setup.exe.
MAC address = 00-13-23-01-14-B1 →IP address = 192.168.20.177
Convert the last two set of hexadecimal numbers to decimal numbers.
6
www.rivatech.de
Custom IP Environment
IPAdminTool and the manual are provided on USB stick or can download from www.rivatech.de
homepage.
IPAdminTool is a management tool, which automatically scans all of the network products for
users to perform administrative tasks, which includes network configurations, firmware update,
device reboot, and device organizations.
To modify the device’s default IP address for customized network area;
1. Find the device from the IPAdminTool’s list and highlight the device’s name.
2. Right-click the mouse and select “IP Address”; IP Setup window appears.
7
www.rivatech.de
3. In the IP Setup’s window, information under ‘Local Network information’ displays the
user/PC’s network area information. Those information need to be incorporated to the
IP Address, Subnet Mask, Gateway, and DNS boxes, except the last 2 sets of IP
Address, which are to be the unique numbers for the device. Refer to the image above
for the setting
4. Click ‘Setup’ to complete the modification. When the dialog box appears to request user
name and password, enter the default value for the administrator account (case-
sensitive) as below:
ID:
root
Password:
pass
PC environment Info
Give new unique IP address in
last two sets and mirror other
information in other boxes
8
www.rivatech.de
Step5. View video on web page
Once the device has the proper IP address, users can view the live streaming images
through a web browser.
The default username and password is
root / pass
.
1. When the device’s web address is accessed, the browser asks to install the ActiveX.
Click Allow.
2. Setup.exe installation link or pop-up window appears, depends on Microsoft® Internet
Explorer version. Proceed with rest of setup installation.
9
www.rivatech.de
3. Follow the instructions of the dialog boxes and complete the installation. Once the
installation is complete, start the web browser again and check if video stream is
displayed in the main view frame.
10
www.rivatech.de
Caution
!
If “
This software requires the Microsoft XML Parser V6 or
higher. Please download MSXML6 from the Microsoft
website to continue. Error code: Cannot create
XMLDOMDocument.
” message appears, download and
install the Microsoft Core XML Services (MSXML) 6.0.
Rebooting
Perform the following procedures to reset your device:
1. While the device is on, press the reset button for 1~2 seconds.
2. Wait for the system to reboot.
Resetting to the Factory Default Settings
When reset the device to the factory default setting, all parameters including the IP address
will be initialized.
To proceed back to the Factory Default reset:
1. While the device is on, press reset button and hold.
2. Release the Reset button after about 5 seconds when green LED blinks at rate of 200ms.
3. Wait for the system to reboot.
More Information
To learn more about using other features of your devices, refer to the manuals as “Web
Interface Manual” or “VCAsys _Online_Help”, which is available on USB stick or on
www.rivatech.de homepage.
Autres manuels pour RC3102HD-5311
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Riva Caméra de sécurité
Riva
Riva RC3500 Manuel utilisateur
Riva
Riva IPX5502HD-6415-05 Manuel utilisateur
Riva
Riva RC3702HD-5314 Manuel utilisateur
Riva
Riva RC3502HD-5311IR Manuel utilisateur
Riva
Riva RC5502HD-6415-05 Manuel utilisateur
Riva
Riva RC4602HD-6416 Manuel utilisateur
Riva
Riva RC3302HD-5344 Manuel utilisateur
Riva
Riva RC6702HD-6311 Manuel utilisateur
Riva
Riva RC3500 Manuel utilisateur
Riva
Riva RC4202HD Manuel utilisateur
Riva
Riva RC302SV-5117 Manuel utilisateur
Riva
Riva RC3502HD-5311 Manuel utilisateur
Riva
Riva RC3202HD-6111W Manuel utilisateur
Riva
Riva RC6602HD-5311 Manuel utilisateur
Riva
Riva RC3502HD-5311IR Manuel utilisateur
Riva
Riva RC3202HD-6111 Manuel utilisateur
Riva
Riva RC3302HD-5344 Manuel utilisateur
Riva
Riva RC4602SV-7416A-30 Manuel utilisateur
Riva
Riva RC362HD-6211IR Manuel utilisateur
Riva
Riva RC6602HD-5311 Manuel utilisateur
