Renishaw RMP600 Manuel utilisateur

RMP600 (QE) high-accuracy radio

machine probe

Installation guide

H-6554-8520-01-A

Renishaw part no. H-6554-8520-01-A

Issued: 04.2022

This document may not be copied or reproduced in whole or in part, or transferred to any other media

or language, by any means, without the prior written permission of Renishaw plc.

Renishaw plc. Registered in England and Wales. Company no: 1106260. Registered office: New Mills,

Wotton-under-Edge, Gloucestershire, GL12 8JR, UK.

Compliance information for this product is available by scanning the QR code or visiting

www.renishaw.com/mtpdoc

Contents

Before you begin .............................................................1.1

Disclaimer .................................................................1.1

Trade marks................................................................1.1

Warranty ..................................................................1.1

Changes to equipment .......................................................1.1

CNC machines .............................................................1.2

Care of the probe ...........................................................1.2

Patents ...................................................................1.2

RMP600 (model RMP600QE) software notices ....................................1.3

RMP600 (model RMP600QE) software licensing agreement .........................1.3

Intended use ...............................................................1.4

Safety ....................................................................1.4

RMP600 basics ...............................................................2.1

Introduction ................................................................2.1

Getting started ...........................................................2.2

System interface..........................................................2.3

Probe configuration ..........................................................2.3

Opti-Logic™ ............................................................2.3

Trigger Logic™ ...........................................................2.3

Probe modes...............................................................2.4

Configurable settings.........................................................2.4

Switch-on / switch-off methods...............................................2.4

Trigger filter .............................................................2.6

Auto-reset function ........................................................2.6

Hibernation mode.........................................................2.6

Multiple probe mode.......................................................2.7

Partnering mode..........................................................2.8

RMP600 dimensions .........................................................2.9

RMP600 installation guide

Contents

RMP600 specification .......................................................2.10

Typical battery life........................................................2.11

Recommended styli.........................................................2.12

System installation ...........................................................3.1

Installing the RMP600 with an RMI-Q or RMI-QE ...................................3.1

Operating envelope .......................................................3.1

Positioning the RMP600 and RMI-Q or RMI-QE .................................3.2

Performance envelope .....................................................3.2

Preparing the RMP600 for use .................................................3.3

Fitting the stylus ..........................................................3.3

Installing the batteries .....................................................3.4

Mounting the probe on a shank ..............................................3.5

Stylus on-centre adjustment.................................................3.6

Calibrating the RMP600 ......................................................3.7

Why calibrate a probe? ....................................................3.7

Calibrating in a bored hole or on a turned diameter...............................3.7

Calibrating in a ring gauge or on a datum sphere ................................3.7

Calibrating the probe length .................................................3.8

Probe configuration ..........................................................4.1

Configuring the probe using the Probe Setup app ..................................4.1

Using Opti-Logic™ ........................................................4.1

Reviewing the probe settings ..................................................4.2

Multiple probe mode settings ..................................................4.3

Probe settings record ........................................................4.4

Probe partnering function .....................................................4.5

With RMI-Q switched on ......................................................4.6

With RMI-QE switched on .....................................................4.6

RMP600 – RMI-Q partnership..................................................4.7

RMP600 – RMI-QE partnership ................................................4.8

Changing probe settings when partnered to an RMI-Q..............................4.10

Changing probe settings when partnered to an RMI-QE ............................4.13

Master reset function........................................................4.15

Operating mode............................................................4.18

iii

Contents

Maintenance .................................................................5.1

Maintenance ...............................................................5.1

Cleaning the probe ..........................................................5.1

Changing the batteries .......................................................5.2

Diaphragm replacement ......................................................5.4

Fault-finding .................................................................6.1

Parts list .....................................................................7.1

RMP600 installation guide

Contents

This page is intentionally left blank.

1.1

Before you begin

see Section 1, “Before you begin”

Disclaimer

WHILE CONSIDERABLE EFFORT WAS MADE TO VERIFY THE ACCURACY OF THIS DOCUMENT

AT PUBLICATION, ALL WARRANTIES, CONDITIONS, REPRESENTATIONS AND LIABILITY,

HOWSOEVER ARISING, ARE EXCLUDED TO THE EXTENT PERMITTED BY LAW.

RENISHAW RESERVES THE RIGHT TO MAKE CHANGES TO THIS DOCUMENT AND TO THE

EQUIPMENT, AND/OR SOFTWARE AND THE SPECIFICATION DESCRIBED HEREIN WITHOUT

OBLIGATION TO PROVIDE NOTICE OF SUCH CHANGES.

Trade marks

RENISHAW® and the probe symbol are registered trade marks of Renishaw plc. Renishaw

product names, designations and the mark ‘apply innovation’ are trade marks of Renishaw plc or its

subsidiaries.

Google Play and the Google Play logo are trademarks of Google LLC.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.

AppStore is a service mark of Apple Inc., registered in the U.S. and other countries.

Other brand, product or company names are trade marks of their respective owners.

Warranty

Unless you and Renishaw have agreed and signed a separate written agreement, the equipment

and/or software are sold subject to the Renishaw Standard Terms and Conditions supplied with such

equipment and/or software, or available on request from your local Renishaw office.

Renishaw warrants its equipment and software for a limited period (as set out in the Standard Terms

and Conditions), provided that they are installed and used exactly as defined in associated Renishaw

documentation. You should consult these Standard Terms and Conditions to find out the full details of

your warranty.

Equipment and/or software purchased by you from a third-party supplier is subject to separate terms

and conditions supplied with such equipment and/or software. You should contact your third-party

supplier for details.

Changes to equipment

Renishaw reserves the right to change equipment specifications without notice.

RMP600 installation guide

1.2

Before you begin

CNC machines

CNC machine tools must always be operated by fully trained personnel in accordance with the

manufacturer’s instructions.

Care of the probe

Keep system components clean and treat the probe as a precision tool.

Patents

Features of the RMP600, and other similar Renishaw products, are the subject of one or more of the

following patents and/or patent applications:

CN 100416216

CN 100466003

CN 101142461

CN 101171493

CN 101198836

CN 101476859

CN 101482402

CN 111133272

EP 1425550

EP 1457786

EP 1576560

EP 1613921

EP 1804020

EP 1866602

EP 1880163

EP 1893937

EP 1931936

EP 2154471

EP 2216761

EP 3688405

IN 215787

IN 234921

IN 305341

IN 307453

IN 364693

IN 8707/DELNP/2008

IN WO2004/057552

JP 2020-535419

JP 4237051

JP 4575781

JP 4852411

JP 5238749

JP 5283501

JP 5308811

JP 5357541

JP 5390719

JP 5611297

KR 1001244

TW I333052

US 2020-0191564

US 6941671

US 7145468

US 7285935

US 7316077

US 7441707

US 7486195

US 7603789

US 7665219

US 7689379

US 7792654

US 7812736

US 7821420

US 8140287

US 9140547

WO 2019/063991

1.3

Before you begin

RMP600 (model RMP600QE) software notices

This RMP600 product includes embedded software (firmware) to which the following notices apply:

US government notice

NOTICE TO UNITED STATES GOVERNMENT CONTRACT AND PRIME CONTRACT CUSTOMERS

This software is commercial computer software that has been developed by Renishaw exclusively

at private expense. Notwithstanding any other lease or licence agreement that may pertain to, or

accompany the delivery of, this computer software, the rights of the United States Government and/or

its prime contractors regarding its use, reproduction and disclosure are as set forth in the terms of the

contract or subcontract between Renishaw and the United States Government, civilian federal agency

or prime contractor respectively. Please consult the applicable contract or subcontract and the software

licence incorporated therein, if applicable, to determine your exact rights regarding use, reproduction

and/or disclosure.

Renishaw software EULA

Renishaw software is licensed in accordance with the Renishaw licence at:

www.renishaw.com/legal/softwareterms

RMP600 (model RMP600QE) software licensing agreement

This RMP600 product includes the following third-party software:

BSD 3-Clause Licence

Redistribution and use in source and binary forms, with or without modification, are permitted provided

that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and

the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions

and the following disclaimer in the documentation and/or other materials provided with the

distribution.

3. Neither the name of ARM nor the names of its contributors may be used to endorse or promote

products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS

IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS

BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING

IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGE.

RMP600 installation guide

1.4

Before you begin

Intended use

The RMP600 is a radio spindle probe that enables automated workpiece inspection and job set-up on

multi-tasking machines, machining centres and gantry machining centres.

Safety

Information to the user

This product is supplied with non-rechargeable lithium metal batteries. Refer to the battery

manufacturer’s literature for specific battery operating, safety and disposal guidelines.

• Do not attempt to recharge the batteries.

• Replace the batteries only with the specified type.

• Do not mix new and used batteries in the product.

• Do not mix different types or brands of batteries in the product.

• Ensure that all batteries are inserted with the correct polarity in accordance with the instructions in

this manual and indicated on the product.

• Do not store the batteries in direct sunlight.

• Do not expose the batteries to water.

• Do not expose the batteries to heat or dispose of the batteries in a fire.

• Avoid forced discharge of the batteries.

• Do not short circuit the batteries.

• Do not disassemble, apply excessive pressure, pierce, deform or subject the batteries to impact.

• Do not swallow the batteries.

• Keep the batteries out of the reach of children.

• If the batteries are swollen or damaged do not use them in the product and exercise caution when

handling them.

• Dispose of waste batteries in accordance with your local environmental and safety laws.

Ensure that you comply with international and national battery transport regulations when transporting

the batteries or this product with the batteries inserted. Lithium metal batteries are classified as

dangerous goods for transportation and require labelling and packaging in accordance with the

dangerous goods regulations before being offered for transportation. To reduce the risk of shipment

delays, should you need to return this product for any reason, do not return any batteries.

In all applications involving the use of machine tools, eye protection is recommended.

The RMP600 has a glass window. Handle with care if broken to avoid injury.

Autres manuels pour RMP600

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Renishaw Instrument de mesure

Renishaw

Renishaw PH10 Manuel utilisateur

Renishaw

Renishaw HCU2 Manuel utilisateur

Renishaw

Renishaw REVO-2 Manuel utilisateur

Renishaw

Renishaw MIH Manuel utilisateur

Renishaw

Renishaw RENGAGE RMP400 Manuel utilisateur

Renishaw

Renishaw SP80 Manuel utilisateur

Renishaw

Renishaw APCA Series Manuel utilisateur

Renishaw

Renishaw OMP40 Manuel utilisateur

Renishaw

Renishaw RLP40 Manuel utilisateur

Renishaw

Renishaw RENGAGE RMP400 Manuel utilisateur

Renishaw

Renishaw NC4 Guide de configuration

Renishaw

Renishaw SP80 Guide de configuration rapide

Renishaw

Renishaw SP600 Manuel utilisateur

Renishaw

Renishaw RTP20 Manuel utilisateur

Renishaw

Renishaw Primo Manuel utilisateur

Renishaw

Renishaw RENGAGE RMP400 Manuel utilisateur

Renishaw

Renishaw RMP40 Manuel utilisateur

Renishaw

Renishaw RLP40 Manuel utilisateur

Renishaw

Renishaw SFP1 Manuel utilisateur

Renishaw

Renishaw OMP400 Manuel utilisateur

Renishaw

Renishaw LP2 Manuel utilisateur

Renishaw

Renishaw RTS Manuel utilisateur

Renishaw

Renishaw RMP40 Manuel utilisateur

Renishaw

Renishaw LP2 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur