Renesas SKP16C26 StarterKit Plus Manuel utilisateur

Analog

Adjust (R16)

Power

LED

Reset

Switch

User

Switches

Thermistor

8 Characters x 2 Lines LCD

LCD

Contrast

User LEDs

M16C/26 MCU

(M30262F8GP)

ICD LED Status:

Red – Target Stopped

Green – Target Running

Status – ICD Status

Red – ICD Power

RTA-FoUSB-MON

In-Circuit Debugger

(ICD)

Target/Bus

Power Mode

Selector

SKP16C26 StarterKit Plus QuickStart Guide Page 1 of 5

Figure 1. SKP16C26

QuickStart Guide SKP16C26

StarterKit Plus

1. SKP16C26 StarterKit Plus Software Install

a) Please insert the enclosed CD into your computer’s CD-ROM drive. The CD should auto-start, displaying the SKP Picker

Install Screen. Follow the directions in the installation windows to install the Renesas tools.

i) If the installation screen does not appear, please browse the CD root folder and double-click on “SKP-Installer.exe”.

– Do not plug the In-Circuit Debugger into your USB port until instructed to in Section 2, USB Driver Installation.

– The installation process requires a valid SKP serial number. Locate the label on the PC board or on the side

of your box.

– During the installation process, you may be prompted to restart your computer. Do not restart until the SKP installer

has completed installation of all of the software items.

– During the SKP install, dialog boxes will appear asking if you would like to install the development tools or not.

The development tools will allow you to evaluate the different features of the M16C/26 MCU and the software

development environment (debugger, compiler, linker, etc…).

2. USB Driver Installation

When you connect the RTA-FoUSB-MON In-Circuit Debugger (ICD) to your computer for the first time, Windows will recognize

this new device and will request the drivers. Follow the steps below to install the drivers. Administrator privileges are

required to install the driver on a Windows 2000/XP machine.

a) Plug one end of the USB cable into the RTA-FoUSB-MON and the other into a USB socket on your PC (the supplied USB

cable is keyed for the mini USB connector on the FoUSB-MON). The “Found New Hardware Wizard” window will appear.

b) If using Windows XP, skip to step 2 c); otherwise, click <Next>.

c) Verify the (Recommended) option is selected and click <Next>.

d) Select “Specify a location” and leave all other options un-checked; click <Next>.

e) Browse to the “C:\MTOOL\FOUSB\USB Drivers” folder.

f) Select the file “fousb.inf” and click <Open>.

g) Click <Ok> to install the USB Driver.

– For Windows XP, a dialog box is displayed warning that the driver has not been tested for Windows XP compatibility.

Please disregard this warning and continue driver installation.

– You can verify that the driver is installed properly by looking at how fast the Status (yellow) LED is blinking on the

RTA-FoUSB-MON. If the driver is loaded correctly, the Status LED will be blinking once every second. If not, the Status

LED will blink 2-3 times a second (if you continue having driver installation problems, see SKP16C26 User’s Manual,

Appendix A. Troubleshooting).

Figure 2. SKP16C26 System Connectivity

SKP16C26 StarterKit Plus QuickStart Guide Page 2 of 5

SKP16C26

10-pin

Target

Cable

PC with Windows®98SE,

2000, Me, or XP

ICD

Mini USB

Cable

Table des matières

Autres manuels Renesas Matériel informatique

Renesas

Renesas SH7085 Manuel utilisateur

Renesas

Renesas H8SX/1520 Series Manuel utilisateur

Renesas

Renesas RL78/G1F Manuel utilisateur

Renesas

Renesas Single-Chip Microcomputer M34519T-MCU Manuel utilisateur

Renesas

Renesas R-IN32M4-CL2 TESSERA Manuel utilisateur

Renesas

Renesas FP-80Q Manuel utilisateur

Renesas

Renesas RX72T Manuel utilisateur

Renesas

Renesas RX Series Manuel utilisateur

Renesas

Renesas M302N1 Manuel utilisateur

Renesas

Renesas PROM Programming Adapters PCA7441 Manuel utilisateur

Renesas

Renesas H8/3864 Series Manuel utilisateur

Renesas

Renesas Converter Board M3T-F160-100NRB Manuel utilisateur

Renesas

Renesas M37630T-RFS Manuel utilisateur

Renesas

Renesas RTK7RLG240C00000BJ Manuel utilisateur

Renesas

Renesas SmartBond UM-B-041 Manuel utilisateur

Renesas

Renesas RA6 Series Manuel utilisateur

Renesas

Renesas Converter Board R0E521174CSJ00 Manuel utilisateur

Renesas

Renesas SuperHTM Family SH7084 Manuel utilisateur

Renesas

Renesas R0E521134CFG00 Manuel utilisateur

Renesas

Renesas R8C/2F Manuel utilisateur

Renesas

Renesas RTK79210**B00000BE Manuel utilisateur

Renesas

Renesas Converter Board R0E530650CFK10 Manuel utilisateur

Renesas

Renesas H8S/2158 Manuel utilisateur

Renesas

Renesas Asynchronous SH7145F Instructions d'installation et d'utilisation

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur