REED 8706 Manuel utilisateur

reedinstruments

www com

Model 8706

Instruction

Manual

Digital Pocket

Psychrometer

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Table of Contents

Features...................................................................................................... 3

Specications............................................................................................. 4

Instrument Description............................................................................... 5

Measuring Procedures .......................................................................... 6--9

Auto Power Off.................................................................................... 6

Mode Options...................................................................................... 6

Data Hold ............................................................................................ 7

Dew Point............................................................................................ 7

Wet Bulb.............................................................................................. 7

External Temperature .......................................................................... 8

Min./Max. .........................................................................................8-9

Calibration .................................................................................................. 9

Troubleshooting........................................................................................ 10

Battery Replacement................................................................................ 11

This unique meter offers several features, such as; the sensor is protected

by tunable cap, it’s pocket-sized, battery operated. It quickly and easily

measures humidity, dry bulb, dew point, wet bulb, external temperature

as well as temperature differential measurements. The psychrometer is a

micro-processor design. A must device for HVAC engineers use. No need

to whirl the meter or refer to the chart.

For service on this or any other REED product or information on other

REED products, contact REED Instruments at info@reedinstruments.com.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Features

• Measures humidity, wet bulb, dew point, air temperature plus external

probe temperatures (requires 87P6 probe)

• Simultaneous display with %RH, temperature and dew point or wet

bulb or external probe temperature (requires 87P6 probe)

• Calculates T1-T2, Air temperature – External probe temperature

(requires 87P6 probe)

• Triple display with backlighting

• Max/Min readings

• Sensor cap closes to protect probe during storage

• Retrieve Max/Min/Avg readings from stored data

• Real time clock

• Triple LCD digital display

• Pocket size, ts easily in your pocket

• Low battery indication

• Fast response

• Accurate reading

• Maximum record function

• Minimum record function

• Dew Point calculated in seconds

• Wet Bulb calculated in seconds

• Microprocessor circuitry for reliability

• Auto power off, time frame selectable

• Disable power off

• Batteries included (2 x AAA)

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Specifications

FUNCTION RANGE RESOLUTION ACCURACY

Humidity: 0 to 100% RH 0.1% RH ±3% RH

Dew Point: -109.7 to 122°F/ 0.1°F/°C ±3%

-78.7 to 50°C

Wet Bulb: -69 to 122°F/ 0.1°F/°C ±3%

-21.6 to 50°C

Internal Temp.: -4 to 122°F/ 0.1°F/°C ±1°F/0.6°C

-20 to 50°C

External Temp. -4 to 158°F/ 0.1°F/°C ±1°F/0.6°C

-20 to 70°C

Power Supply: 2 x 1.5V AAA batteries (included)

Dimensions: 7 x 1.9 x 1" (179 x 48 x 25mm)

Weight: 3.3 oz (95g)

Accessories: Optional External Temperature Probe (Model 87P6)

Optional Calibration Salt Bottles; 33% (Model RHA-33)

& 75% (Model RHA-75)

WARNING

Be sure to open the

sensor protection cap

before starting the

measurement in order

to get an accurate

value.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Instrument Description

1) Power On/Off Button

2) °C/°F Button, Switch between

°C and °F

3) MODE Button, Switch between

Db & DP (Db=Air Temperature)

4) HOLD Button

a) Hold display

b) Power Button +

HOLD = Non-Sleep mode

(The default setting is auto-sleep

in 5 minutes)

5) RESET Button,

Reset Min/Max memory

6) MN/MX Button

a) Display minimum value of

memory from when the meter is

turned on to now.

b) Display maximum value of

memory from when the meter

is turned on to now.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Measuring Procedures

WARNING

Plugging in an external probe when the meter is on, could cause

a "ER 5" error in the min. or max. mode for external temperatures.

Press the "RESET" button to remove the error.

Auto Power Off (Sleep Function)

The meter will turn itself off after 5 minutes.

To override Auto Power Off function, press + HOLD while the meter is

off. When "n" appears (see gure A), release the HOLD button. The meter

is now in Non-Sleep Mode.

Figure A

Mode Options

1. Turning on the protective sensor cap in counterclockwise direction.

2. Turn meter on by pressing power button (see gure B).

3. Press C/F key for more than 1 second to convert reading to desired

unit. Both the temperature and relative humidity measurement will

display simultaneously (see gure C).

Figure B

Figure C

requires 87P6 probe

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Data Hold Function

1. Press "HOLD" button until (HLD) appears in display.

2. The current reading is now held and will not change until the

Hold function is cancelled (see gure D).

3. Press "HOLD" button again to cancel the Hold function.

Figure D

The Hold function can be used on humidity,

dew-point, dry bulb/T1, external temperature/

T2, wet bulb and temperature difference.

Dew Point Function

1. Press MODE button until "DP" appears on display.

2. Select to display dew point or dry bulb (air temp.) in any mode while the

unit is on (see gure E).

Figure E

Figure E1

Wet Bulb Function

Turn the meter on by pressing power button.

You will see "Wb" temperature indicated on the display (see gure E1).

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

External Temperature Function

1. Plug the optional external probe (Model 87P6) into the meter.

2. Press the RESET button until "Ex" appears on display.

The meter will now display external probe temperature. See gure F.

Figure F

Note: If the probe isn’t plugged in meter,

"Ex" won’t appear on display even when

pressing the RESET button.

Min./Max. Function

1. Press and hold MN/MX button until (MIN) appears on the display

(see gure G). The display is now showing minimum humidity

and temperature readings currently in the memory.

2. Press and hold MN/MX button again until (MAX) appears on the display

(see gure H). The display is now showing maximum humidity and

temperature readings currently in the memory.

3. To return to the current temperature and humidity readings press and

hold the MN/MX button until Min or Max disappear from the display.

4. Press the RESET or the MN/MX button for more than two seconds to

clear currently in the memory.

Figure G

continued ...

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

WARNING

While checking the MIN/MAX value for "Ex" don’t replace the probe

or you will get an error code. If you don’t plug the probe into socket

before turning the meter on, the error code will also appear when you

check the MIN/MAX value.

Note: Low battery power tends to give inaccurate readings, therefore

make sure you have enough power.

Calibration

WARNINGS

• You can exit the calibration procedure without saving the data in

the memory by pressing the "ON/OFF" button before step 4. At

step 4, press the "ON/OFF" button to exit the calibration mode.

• Auto power off is disabled in calibration mode.

•

For the highest accuracy, the calibration should be operated at 23°C.

• If the reading is out of 75.3% 0.5% at step 4, this indicates the

calibration has failed. See troubleshooting section below.

1. Turn the meter off and plug the sensor probe into 33% salt bottle.

Press the "ON/OFF + C/F " buttons for more than one second to enter

calibration mode.

2. "32.8%" will ash on the display, when "---.-" is showing on the display,

that means the values are invalid in the calibration process. After 30

min, the ashing will stop to indicate the procedure is nished.

3. Move the sensor to 75% salt bottle and press "MN/MX" for more than

one second to enter 75.3% calibration. "75.3%" will ash

on the display.

4. The ashing will stop after 30 minutes, at this point the entire

calibration is completed and the calibration data has been

saved in memory.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

reedinstruments

www com

Troubleshooting

Power is on but the display is not working:

A. Make sure you’re pressing the ON/OFF button for more than 1 second

B. Verify that the batteries are in place and that they are in proper contact

and in the correct polarity.

C. Replace with new batteries and try again.

D. Remove the batteries for one minute, put them back in and try again.

Display is not turning on:

A. Verify that the Low Battery symbol isn’t displayed before the

display disappears, if yes, replace with a new battery.

B. Check if the sleep mode is active. If yes, press the power + HOLD

buttons to disable auto power off function.

WARNING

Plugging in an external probe when the meter is on, could cause

a "ER 5" error in the min. or max. mode for external temperatures.

Press the "RESET" button to remove the error.

Note:

Dry Bulb temperature means air (internal) temperature.

Dew point & Web Bulb are calculated from internal temperature.

Er 1

Circuit error in RH measurement

channel, return the meter to place

of purchase for repairs.

Er 2

Circuit error in internal temperature

measurement channel, return the me-

ter to place of purchase for repairs.

Er 3

Circuit error in reference resistor

channel, return the meter to place

of purchase for repairs.

Er 4

Internal temp. is out of the range.

Er 5

External temp. is out of the range.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur