Quantum Scalar i6 Manuel utilisateur

Table des matières

Autres manuels Quantum Stockage

Quantum

Quantum Superloader 3 Mode d’emploi

Quantum

Quantum Scalar i40 Manuel utilisateur

Quantum

Quantum QX Series Manuel utilisateur

Quantum

Quantum Superloader 3 Manuel

Quantum

Quantum Scalar i6000 Manuel utilisateur

Quantum

Quantum SuperLoader DLT Manuel utilisateur

Quantum

Quantum Scalar LTFS Manuel de la liste des pièces

Quantum

Quantum DAT 160 Manuel utilisateur

Quantum

Quantum PX720 Manuel utilisateur

Quantum

Quantum Scalar i500 Manuel utilisateur

Quantum

Quantum Quantum Atlas 10K II 9.2/18.4/36.7/73.4 GB Manuel utilisateur

Quantum

Quantum LTO-4 (Model B) Manuel utilisateur

Quantum

Quantum Sun StorEdge L25 Manuel utilisateur

Quantum

Quantum Quantum Fireball SE Manuel utilisateur

Quantum

Quantum RDX 8000 Manuel utilisateur

Quantum

Quantum Scalar 218 Guide d'installation

Quantum

Quantum StorNext QD7000 Manuel utilisateur

Quantum

Quantum DLT-S4 Manuel utilisateur

Quantum

Quantum StorNext QD7000 Manuel utilisateur

Quantum

Quantum SuperLoader 3A Series Manuel utilisateur

Quantum

Quantum DXi6900 Manuel utilisateur

Quantum

Quantum FastStor 1 Manuel utilisateur

Quantum

Quantum StorNext QD6000 Manuel utilisateur

Quantum

Quantum P4000 Series Instructions d'installation et d'utilisation

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur

Scalar i6 QUICK START

The Scalar i6 features simple, cartridge-based media handling with active vault and Extended Data Life

Management (EDLM) partitions that automatically scan media for certain issues. For complete documentation,

including pre-installation requirements, refer to the Scalar i6 Documentation Center:

http://quantum.com/scalari6docs.

Activate your warranty and register your product with Quantum: www.quantum.com/startup

Your system will include a single Control Module, or a Control and at least one Expansion Module (EM).

Installing the Scalar i6

A summary of the steps is below. For details, see:

Install > Single Module Installation or Install > Multi-Module Installation.

For safety information, see Resources > Safety Information.

Step 1 Unpack the library, and remove the top cover and restraints.

Step 2 Multi-module installation only: Remove the robot and

the bottom cover; then install the bottom cover on the

bottom module of the library.

Step 3 Mount the library in the rack. For specifications, see

“Rack” in the Technical Specifications section of the

Site Planning Guide.

Step 4 Multi-module installation only: Add EMs, and install the

robot and the top cover.

Step 5 Install components, and cable the library.

Step 6 Connect to the WebGUI, and install the firmware.

Page 1

Step 7 Log on, and run the Installation Verification Test (IVT).

Expansion Module

Control Module

Local User Interface (LUI) Magazines Magazine Eject Buttons

Configuring the Scalar i6

6-68759-01 Rev A ©2019 Quantum Corporation. All rights reserved.

Page 2

*6-68759-01*

Operating and Maintaining the Scalar i6

At a minimum, you must complete the steps below to get your system up and running.

Step 1 Add licenses. See Operate > User Guide > Licenses.

Step 2 Define I/E slots. See Operate > User Guide > Library > I/E Area.

Step 3 Define cleaning slots. See Operate > User Guide > Library > Library Cleaning Slots.

Step 4 Create a partition. See Operate > User Guide > Partitions.

For information about configuring other parts of the system, such as setting the date and time, registering

the library, and configuring library contact information, see:

Install > Single Module Installation or Install > Multi-Module Installation.

Make sure to learn how coordinates work,

because this will help you locate drives,

slots, and media in your library.

See Operate > Understanding Coordinates.

Now that your system is up and running, use the Status menu to view hardware and library statuses.

Set up email notification for anyone who needs to

know about potential issues and information, such as:

•Media integrity, security, and usage

•Drive cleaning and utilization

•Reports about the system