Protech PA-J581 Series Manuel utilisateur

USER

MANUAL

PA-J581 Series

15” Fanless Slim POS Terminal

J6412 CPU Processor

PA-J581 M1

PA-J581 POS System

All trademarks and registered trademarks mentioned herein are the

property of their respective owners.

This manual is copyrighted in Feb. 2023. You may not reproduce or

transmit in any form or by any means, electronic, or mechanical,

including photocopying and recording.

DISCLAIMER

This user’s manual is meant to assist users in installing and setting up

the system. The information contained in this document is subject to

change without any notice.

CE NOTICE

This is a class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

FCC NOTICE

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

You are cautioned that any change or modifications to the equipment

not expressly approve by the party responsible for compliance could

void your authority to operate such equipment.

CAUTION: Danger of explosion may occur when the battery is

incorrectly replaced. Replace the battery only with the same or

equivalent type recommended by the manufacturer. Dispose

of used batteries according to the manufacturer’s instructions.

WARNING: Some internal parts of the system may have high

electrical voltage. We strongly recommend that only qualified

engineers are allowed to open and disassemble the system.

Please operate the LCD and Touchscreen with extra care as

they can be broken easily.

Contents

Revision History ........................................................................................... vii

1Introduction ......................................................................................... 1-2

1.1 About This Manual....................................................................... 1-2

1.2 POS System Overview ................................................................ 1-3

1.2.1 Panel PC .............................................................................. 1-3

1.2.2 Normal Stand ....................................................................... 1-4

1.2.3 Normal Stand with 15” 2nd Display...................................... 1-5

1.2.4 Normal Stand with VFD........................................................ 1-6

1.3 System Specifications.................................................................. 1-7

1.4 Safety Precautions....................................................................... 1-9

2System Configuration......................................................................... 2-1

2.1 System External I/O Ports Diagram & Pin Assignment ............... 2-2

2.2 Function Button and I/O Ports ..................................................... 2-3

2.2.1 Power Button........................................................................ 2-3

2.2.2 DC-IN Port............................................................................ 2-3

2.2.3 COM Ports (COM1, COM2, COM3)..................................... 2-3

2.2.4 Extension RJ45 COM Port (option)...................................... 2-4

2.2.5 LAN Port (LAN) .................................................................... 2-5

2.2.6 HDMI Port Connector (HDMI) .............................................. 2-6

2.2.7 Dual USB 3.0 Port Connector (USB1, USB2)...................... 2-7

2.2.8 Dual USB 2.0 Port Connector (USB3, USB4)...................... 2-8

2.2.9 24V Power Port Connector (24V PWR)............................... 2-9

2.2.10 2nd Display Power Port Connector (2ND-DIS PWR) .......... 2-9

2.2.11 Extension Power USB 24V Port /Dual USB 2.0 Port

(option) ............................................................................... 2-10

2.2.12 Cash Drawer Port (DRW)................................................... 2-11

2.2.13 Line Out Audio Jack (Line-out)...........................................2-12

2.2.14 Mic In Audio Jack (MIC) ..................................................... 2-12

2.3 Main Board Component Locations & Jumper Settings..............2-13

2.4 Jumper & Connector Quick Reference Table ............................2-15

2.5 Setting Jumpers......................................................................... 2-18

2.6 Setting Main Board Connectors and Jumpers........................... 2-20

2.6.1 COM1, COM2_1, COM3_1 Voltage Selection (JP_COM1,

JP_COM2, JP_COM3)....................................................... 2-20

2.6.2 COM Connectors (COM2_2, COM3_2) ............................. 2-21

2.6.3 COM4 Connector (COM4) ................................................. 2-21

2.6.4 LVDS VCC Voltage Selection (JP1)...................................2-22

2.6.5 LVDS BKLCTL PWM Voltage Level Selection (JP2) .........2-23

2.6.6 LVDS BKLCTL PWM Fix Voltage Selection (JP4) .............2-24

2.6.7 LDVS BKLCTL PWM Selection (JP5) ................................ 2-25

2.6.8 LVDS BKLTEN Voltage Level Selection (JP6) ...................2-25

2.6.9 Drawer Ports (DRW1, DRW1-1, DRW1-2)......................... 2-26

2.6.10 Dual Cash Drawer Selection with Y-Cable (JP7) ............... 2-26

2.6.11 Cash Drawer Voltage Selection (JP3)................................2-27

2.6.12 USB3 Port Selection (JP_USB3) ....................................... 2-30

2.6.13 USB4 Port Selection (JP_USB4) .......................................2-30

2.6.14 USB5 Port Selection (JP_USB5) .......................................2-31

2.6.15 USB7 Port Selection (JP_USB7) ....................................... 2-31

2.6.16 USB8 / M.2 Selection (JP_USB8)......................................2-32

2.6.17 USB5 Connector (USB5) ................................................... 2-33

2.6.18 Internal USB Wafers (USB3_2, USB4_2, USB5_2, USB6,

USB7, USB8, USB9, USB10) ............................................2-34

2.6.19 VGA Connector (JVGA1) ................................................... 2-38

iii

2.6.20 EDP Connector (EDP1) ..................................................... 2-39

2.6.21 LVDS Connector (LVDS1)..................................................2-40

2.6.22 Slide Switch For LVDS Resolution Selection (SW2).......... 2-41

2.6.23 M.2 M-Key Slot (M2_M1) ................................................... 2-42

2.6.24 M.2 E-Key Slot (M2_E1) .................................................... 2-44

2.6.25 SATA 3.0 & SATA Power Connectors (SATA1, SATA_PWR1)..

........................................................................................... 2-46

2.6.26 General-Purpose Input / Output Connector (GPIO1).........2-47

2.6.27 On Board Touch Wafer (JTOUCH1)...................................2-47

2.6.28 24V DC Out Connector (VOUT_24)................................... 2-48

2.6.29 Power for 2nd Display Connector (VOUT_12)................... 2-48

2.6.30 DC 5V Power Connector (VOUT_5) .................................. 2-49

2.6.31 Power Button Wafer (JPWRBTN1) .................................... 2-49

2.6.32 System LED Wafer (JSYS_LED1) ..................................... 2-50

2.6.33 Audio Connector (AUDIO1) ............................................... 2-50

2.6.34 Speaker Wafer (SPK1)....................................................... 2-50

2.6.35 CPU Fan Connector (CPU_FAN1).....................................2-51

2.6.36 System Reset Wafer (JRST1)............................................2-51

2.6.37 Panel Inverter Wafer (INV1)...............................................2-52

2.6.38 I2C Wafer (I2C1) ................................................................ 2-52

2.6.39 Battery Wafer (JBAT1) ....................................................... 2-53

2.6.40 Clear CMOS Data Selection (JCMOS1) ............................ 2-54

2.7 VFD Board Component Locations & Pin Assignment ............... 2-55

2.7.1 VFD Board: MB-4003......................................................... 2-55

2.7.2 Jumper & Connector Quick Reference Table.....................2-55

2.7.3 Setting MB-4003 VFD Board Connector and Jumper........2-56

2.7.3.1 Power Switch Selection (JP12V) ................................. 2-56

2.7.3.2 RS-232 Serial Interface Connector (CN1) ...................2-56

3Software Utilities ................................................................................. 3-1

3.1 Driver ........................................................................................... 3-2

3.1.1 Introduction .......................................................................... 3-2

3.1.2 Intel®Chipset Software Installation Utility ............................ 3-3

3.1.3 Graphics Driver Utility .......................................................... 3-4

3.1.4 Intel®Management Engine Components Installer Installation..

......................................................................................... 3-5

3.1.5 LAN Driver Utility.................................................................. 3-6

3.1.6 Sound Driver Utility .............................................................. 3-7

3.2 Embedded Peripheral Devices .................................................... 3-8

3.2.1.1 VFD: MB-4003 (RS-232) Commands List ..................... 3-8

3.2.1.2 OPOS Driver .................................................................. 3-9

3.3 API ............................................................................................. 3-14

3.3.1 API Package Content......................................................... 3-14

3.3.2 API Procedure .................................................................... 3-15

3.3.3 Cash Drawer ...................................................................... 3-18

3.3.4 Watchdog Timer ................................................................. 3-19

3.3.5 Hardware Monitor............................................................... 3-20

3.3.6 Digital IO Control................................................................ 3-21

3.3.7 Device Power Control ........................................................ 3-22

3.4 API Function .............................................................................. 3-23

3.4.1 Cash Drawer Function ....................................................... 3-23

3.4.2 Watch Dog Function........................................................... 3-24

3.4.3 Hardware Monitor Function................................................3-25

3.4.4 Digital IO Control Function ................................................. 3-27

3.4.5 Device Power Control Function .........................................3-27

3.5 BIOS Operation .........................................................................3-29

3.5.1 BIOS Setup ........................................................................ 3-29

3.5.1.1 Accessing Setup Utility ................................................ 3-30

3.5.2 Main.................................................................................... 3-32

3.5.3 Advanced ........................................................................... 3-33

3.5.3.1 Advanced – CPU Configuration ................................... 3-34

3.5.3.2 Advanced – PCH-FW Configuration ............................ 3-36

3.5.3.3 Advanced – Trusted Computing................................... 3-37

3.5.3.4 Advanced – ACPI Settings ........................................... 3-38

3.5.3.5 Advanced – F81967 Super IO Configuration...............3-39

3.5.3.6 Advanced – Hardware Monitor .................................... 3-44

3.5.3.7 Advanced – F81967 Watchdog Configuration ............. 3-47

3.5.3.8 Advanced – S5 RTC Wake Settings ............................ 3-48

3.5.3.9 Advanced – USB Configuration ................................... 3-49

3.5.3.10 Advanced – Network Stack Configuration ................... 3-50

3.5.3.11 Advanced – NVMe Configuration................................. 3-51

3.5.4 Chipset ............................................................................... 3-52

3.5.4.1 Chipset – System Agent (SA) Configuration ................ 3-53

3.5.4.2 Chipset – PCH-IO Configuration..................................3-55

3.5.5 Security .............................................................................. 3-61

3.5.6 Boot .................................................................................... 3-62

3.5.7 Save & Exit......................................................................... 3-63

Appendix A System Diagrams....................................................A-1

HDD Tray Disassembly ............................................................................A-2

2nd Display Module Assembly..................................................................A-3

VFD Module Assembly .............................................................................A-7

MSR Module Assembly ..........................................................................A-11

i-Button Module Assembly ......................................................................A-12

Fingerprint Module Assembly .................................................................A-13

Connecting 60W Power Adapter ............................................................A-14

Connecting 90W Power Adapter ............................................................A-17

Front Cover Module Assembly Exploded Diagram (1) (Flat Resistive Touch

Panel) .....................................................................................................A-19

Front Cover Module Assembly Exploded Diagram (2) ...........................A-20

Front Cover Module Assembly Exploded Diagram (3) (Projected Capacitive

Touch Panel)...........................................................................................A-21

Rear Cover Assembly Exploded Diagram (1).........................................A-22

Rear Cover Assembly Exploded Diagram (2).........................................A-23

LCD Case Assembly Exploded Diagram................................................A-24

Exploded Diagram for Panel PC HDD Assembly ...................................A-25

LCD Assembly Exploded Diagrams (1) ..................................................A-26

LCD Assembly Exploded Diagrams (2) ..................................................A-27

Main Board Assembly Exploded Diagram ..............................................A-28

LCD Holder Assembly Exploded Diagram (1) ........................................A-29

LCD Holder Assembly Exploded Diagram (2) ........................................A-30

LCD Holder Assembly Exploded Diagrams (3) ......................................A-31

LCD Holder Assembly Exploded Diagrams (4) ......................................A-32

Barcode Scanner Kit Exploded Diagram ................................................A-33

I/O Ports Cover Assembly Exploded Diagram........................................A-34

HDD Module Exploded Diagram ............................................................A-35

AL Cover Module and CPU Heatsink Exploded Diagram ......................A-36

Appendix B Technical Summary ................................................B-1

Block Diagram ..........................................................................................B-2

Interrupt Map ............................................................................................B-3

I/O Map ...................................................................................................B-15

Memory Map...........................................................................................B-16

Configuring WatchDog Timer .................................................................B-18

Flash BIOS Update.................................................................................B-20

vii

Revision History

The revision history of PA-J581 User Manual is described below:

Version No.

Revision History

Page No.

Date

Initial Release

2023/02/21

Table des matières

Autres manuels protech Terminal tactile

protech

protech PS3100 Series Manuel utilisateur

protech

protech POS-6510 Series Manuel utilisateur

protech

protech POS-6511 Series Manuel utilisateur

protech

protech prox PA-A900 Manuel utilisateur

protech

protech prox PA-A310 Manuel utilisateur

protech

protech PA-3252 Manuel utilisateur

protech

protech MH-5752 Manuel utilisateur

protech

protech POS-3150 Series Manuel utilisateur

protech

protech PA-3310 Manuel utilisateur

protech

protech POS-3120 Series Manuel utilisateur

protech

protech prox PA-A900 Manuel utilisateur

protech

protech PA-A901 Manuel utilisateur

protech

protech prox PA-J600 Manuel utilisateur

protech

protech PA-J580 Series Manuel utilisateur

protech

protech PA-6225 Manuel utilisateur

protech

protech prox PA-J511 Manuel utilisateur

protech

protech prox PA-J670 Manuel utilisateur

protech

protech prox PA-J500 Manuel utilisateur

protech

protech prox PA-6980 Manuel utilisateur

protech

protech PA-2019 Series Manuel utilisateur

protech

protech prox PA-J511 Manuel utilisateur

protech

protech PA-3055 Manuel utilisateur

protech

protech prox PA-R120 Manuel utilisateur

protech

protech PA-6722 Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur

protech PA-J581 Series Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques