PROAIM TP-SPHF-01 Manuel utilisateur

Speechify Presidenal Teleprompter

(TP-SPHF-01)

Assembly Manua l

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

What’s In The Box

Laptop/Tablet Tray with

C-Stand Adapter

Extendable Adapters

Beam Splier Glass

Adjustable Glass

Holder with Handle

Tray Holding Arm with Baby Pin

2 x Cleaning Clothes

Hand Gloves

10 x Binder Clip Allen Key L-Type

(Size: -4mm)

Speechify Presidenal Teleprompter Setup

Tray Holding Arm with Baby Pin

• Now place the clamp of the tray holding on

a tripod stand and lock it with the knob.

• Loosen the knob of the baby pin and move

the pin accordingly.

• Loosen the knob to unlock the clamp of the

tray holding.

Cloth Hood

Glass Protecve Case

Bag Packing

Laptop/Tablet Tray with C-Stand Adapter

• The stand would look like this aer aaching

the C-Stand adapter.

• Posion and place it on the C-stand adapter.

• Loosen the knob of the C-Stand adapter and

mount it on the baby pin.

• Now secure the C-Stand Adapter by

ghtening its knob.

Extendable Adapters

• Loosen the knob of the extendable adapter,

and then remove the adapter.

• Now lock the baby pin by the knob.

• Now secure the extendable adapter by

closing its knob from the boom of the

adapter.

• Loosen the bigger knob to open the

adjustable glass holder, and then mount it on

the top of the tripod stand.

• Now loosen the circular knob on the top of

the glass holder.

Adjustable Glass Holder with Handle

• Tighten the knob to secure the glass holder

on the tripod stand.

• Loosen the circular knob to change the angle

of the adapter.

• Tighten the circular knob to secure the

angle of the C-stand adapter.

• Cover the glass with the provided hood and

secure it using binder clips from three sides.

• Add the provided handle into the holder, and

ghten it properly.

• Now loosen the middle knob to adjust the

glass holder with the help of

the handle, and then ghten the knob again.

• Leave one side of the glass unclipped, as

shown in image.

• Raise the hood from the unclipped side and

put it over your camera (Not Included), as

shown in the image.

• Insert the mirror into adjustable glass holder

and secure it with the circular knob.

• Once the camera (Not Included) is covered,

properly clip the hood.

YOUR PROAIM SPEECHIFY PRESIDENTIAL TELEPROMPTER

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,

we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it

cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and

evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in

transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

support and care unl you use our product.

Table des matières

Autres manuels PROAIM Accessoires pour appareils photo