PROAIM CINEMA TP-BIPT-01 Manuel utilisateur
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Universal Bi-Prompter Teleprompter Kit (TP-BIPT-01)
Bi-Prompter Teleprompter Kit Teleprompter Glass Camera Mounng Base
Rod Adapter
Ring Clamp
(150-100mm)
(OD-ID)
Ring Clamp
(150-75mm)
(OD-ID)
Ring Clamp
(150-65mm)
(OD-ID)
Ring Clamp
(150-50mm)
(OD-ID)
Ring Clamp
(150mm)
(OD) Tablet Holder
C-Stand Adapter
2
• Insert the rod adapter into the Bi-Prompter
teleprompter and then insert the c-stand
adapter.
Bi-prompter Teleprompter kit Setup
• Properly ghten the c-stand adapter, as
shown in the image.
• Remove the knob by loosening it.
Hand Gloves
Bag Packing
2 x 300mm Rods
3 x Allen Keys
(Sizes: 3mm, 4mm&
5/16”mm)
2 x Cleaning Clothes
Teleprompter Glass
2 x LN CSK Bolts (Sizes: 3x8”)
3
• Insert the knob into the Rod Adapter and
then ghten it properly.
• Place the teleprompter glass and insert the
3x8” CSK bolts.
• Loosen the knob of the c-stand and mount
the Bi-prompter to the stand (Not Included).
• Properly ghten it with the knob.
NOTE: The kit includes mulple receivers
16mm, 1/4"-20, and 3/8"-16, allowing you to
mount on a regular C-stand .
• Remove the CSK bolts, as shown in the image.
• Tighten the bolts using a screw driver.
4
• Remove the knob aer loosening it, as shown
in the image.
• Properly ghten the knob, as shown in the
image.
• Insert the tablet holder and then insert the
knob.
• Properly ghten the knob, as shown in the
image.
• Loosen the knob and insert the teleprompter
glass.
Inserng Teleprompter Glass In Bi-Prompter
NOTE: Tablet holder is made with High-Grade
Plasc, High-Grade Mild steel & Aluminum &
ued to mount Tablet (Standard or Large Size).
5
NOTE: The Bi-prompter is built around a
standard rod system which easily ts the
camera.
NOTE: Camera Mounng Base provides Height
adjustment feature.
• Loosen both the knobs of the camera
mounng base and insert the rods.
• Loosen both the knobs and insert the 300mm
rod.
• Insert an another 300mm rod and ghten the
knobs properly.
Camera Mounng Base Setup
NOTE: Bi-prompter is a mirror box posioned in
front of the camera lens that lets lmmakers
shoot down-the-lens interviews while keeping
the interviewer and subject in eye contact .
6
• Press the push pin and slide the quick release
plate.
• Loosen the lever lock by moving it in forward
direcon.
• Remove the camera support using the Allen
key.
NOTE: It comes with an adjustable quick
release camera plaorm to lock the camera in
its desired posion.
• Remove the quick release plate.
NOTE: The quick-release oers you easy
swapping of camera gimbals & protects your
gimbal from twisng & scratching.
• Insert the camera support to the opposite
direcon and ghten it properly.
• Tighten both the knobs, as shown in the
image.
7
NOTE: It also includes 5 Donut Rings
(Sizes: 50mm, 65mm, 75mm, 100mm ) in
dierent sizes to lter out your shots' excess
light.
• Slide the camera (Not Included) on the
camera plate and insert the Ring clamp.
NOTE: Quick Release is a compact plate that
quickly mounts handheld gimbals such as
3S, DJI Ronin S & RS 2 etc.
• Properly ghten it using the 3/16” Allen key
and the knob.
NOTE: The kit includes mulple receivers
16mm, 1/4"-20, and 3/8"-16, allowing you to
mount on a regular C-stand.
• Properly lock the lever, as shown in the
image.
NOTE: Bi-prompter is a mirror box posioned in
front of the camera lens that lets lmmakers
shoot down-the-lens interviews while keeping
the interviewer and subject in eye contact.
• Properly match the camera (Not Included)
with the quick release threads and ghten it
with the screw driver.
NOTE: Quick Release constructed of High
-Grade CNC Aluminum & features both 3/8"-16
and 1/4"-20 screws for mounng.
8
YOUR PROAIM UNIVERSAL BI-PROMPTER TELEPROMPTER KIT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
3-Dierent Modes of Bi– Prompter Teleprompter Kit
NOTE: Mode1: Interview Mode
In this, the Interviewer & subject will sit at
45° angle & reect each other on the mirror.
Mode2: Interview mode (Mirror version)
In this, You see each other’s expression
through mirror.
Mode3: Teleprompng mode
In this, you mount any tablet to read while
looking straight into the lens.
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
Autres manuels PROAIM Accessoires pour appareils photo
PROAIM
PROAIM MB 30 Manuel utilisateur
PROAIM
PROAIM P-WNG Instruction manuelle
PROAIM
PROAIM P-L2-SL Manuel utilisateur
PROAIM
PROAIM CINEMA VCTR-TH Manuel utilisateur
PROAIM
PROAIM RS-1 Manuel utilisateur
PROAIM
PROAIM VI-2AXS-01 Manuel utilisateur
PROAIM
PROAIM P-TMGC-01 Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM CG-A7R3-01 Manuel utilisateur
PROAIM
PROAIM FLCM-GAXS Manuel utilisateur
PROAIM
PROAIM ST-LHWK-01 Manuel utilisateur
PROAIM
PROAIM DL-FLDB-01 Manuel utilisateur
PROAIM
PROAIM CT-STRK-02 Manuel utilisateur
PROAIM
PROAIM P-OHCP-01 Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM Tango P-TNGO-01 Manuel utilisateur
PROAIM
PROAIM P-CWFT-01 Manuel utilisateur
PROAIM
PROAIM Jazz Autopan Camera Slider Manuel utilisateur
PROAIM
PROAIM JB-FR6T-00 Manuel utilisateur
PROAIM
PROAIM TP-ULTB-01 Manuel utilisateur
