PROAIM Astra Manuel utilisateur

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything

that is listed below.

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable

Astra 4 Camera Jib Crane (JB-AS04-00)

Assembly Manua l

4 Jib – comes with Camera Mount Plate

Vercal Counterweight Bar LCD Mounng Bracket

Tightening knob

1. Using tripod head

Astra Jib Setup

 Remove the quick release plate from the

tripod head. Screw into the crane’s mount,

located on the rear secon.1/4”-20 &3/8”-16

threads available. Do not aempt to use the

lt funcon on the uid head with the crane

aached.

 With the stand mount aached to the crane ,

set it on top of the stand’s main sha and

ghten the knob to secure it.

 At this point, the crane will be front heavy.

Allow it to rest on the ground. Aach

extension plate by using the provided screw.

Now, aach the camera to the extension plate

by using ¼”-20 universal sized screw; it will

thread from the boom of the camera.

Properly secure your camera.

Camera mount with uid head

 Firstly you will need to aach the BS-100

screw with your uid head then aach the

uid head with your camera plate.

2. Using crane stand

Now that the crane’s rear secon is mounted securely to support stand, it is me to connect the Camera

setup to the camera plate.

 Secure your camera properly as shown.

Camera Setup

Mounng Counterweights

 Aer the camera is mounted, it is safe to add

counterweights to bring the crane into

balance. First, aach the bar that the

counterweights will be placed on. Connect

the vercal counterweight bar to the bolt.

NOTE: When the proper amount of counterweight has been added, the crane will rest in a horizontal

posion. Moons will be smooth and eortless. Note, the type of camera and mounng posion will aect

the balance. If the mounted camera is front heavy then mount the vercal bar in the rst hole.

 Manual lt mode is achieved by loosening the

knob & removing the pin at the top of the

stand mount. Now the handle can be used to

lt the camera independently from the

crane’s body.

1. For straight angle

Below is the manual lt funconality of the camera.

3. For lower angle

Manual Tilt Mode

WARNING: when lng manually, always maintain control of the camera. A front heavy camera may

Move forward abruptly without noce.

2. For upper angle

Oponal Tilt Brake

 For using lt funcon, loosen the knob to lt

the crane to the desired posion. Tighten

back the knob if you want to put a brake to

lt feature.

Monitor Mounng Bracket

 To aach the monitor bracket, screw the

knob into the threaded hole on the crane’s

tripod mount.

YOUR PROAIM ASTRA 4FT CAMERA JIB CRANE

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty: We oer one year warranty for our products from date of purchase. Within this period

of me, we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon

costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are

subjected to inspecon and evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from

mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone

other than our company.

our utmost support and care unl you use our product.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels PROAIM Accessoires pour appareils photo

PROAIM

PROAIM CINEMA ST-HWK-01 Manuel utilisateur

PROAIM

PROAIM SR-SBP-02 Manuel utilisateur

PROAIM

PROAIM Gravita Manuel utilisateur

PROAIM

PROAIM Cinema MA-293-00 Manuel utilisateur

PROAIM

PROAIM P-22 Manuel utilisateur

PROAIM

PROAIM CINEMA Series Manuel utilisateur

PROAIM

PROAIM SL-WG Manuel utilisateur

PROAIM

PROAIM CG-014-00 Manuel utilisateur

PROAIM

PROAIM CINEMA Series Manuel utilisateur

PROAIM

PROAIM P-SBP-01 Manuel utilisateur

PROAIM

PROAIM P-GDTR-01 Manuel utilisateur

PROAIM

PROAIM P-L4-SL Manuel utilisateur

PROAIM

PROAIM CINEMA Series Manuel utilisateur

PROAIM

PROAIM RS-1 Manuel utilisateur

PROAIM

PROAIM CST-100-01 Manuel utilisateur

PROAIM

PROAIM Explorer Manuel utilisateur

PROAIM

PROAIM P-BPDP-19 Manuel utilisateur

PROAIM

PROAIM FF-WRLS-DR Manuel utilisateur

PROAIM

PROAIM CINEMA Series Manuel utilisateur

PROAIM

PROAIM VCTR-LT-HAP Manuel utilisateur

PROAIM

PROAIM CINEMA Series Manuel utilisateur

PROAIM

PROAIM MB-10 Manuel utilisateur

PROAIM

PROAIM CINEMA DL-MRCS-01 Manuel utilisateur

PROAIM

PROAIM HS-1000 Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur