PROAIM P-WNG Instruction manuelle
PROAIM WING HANDHELD STEADYCAM 2
IT IS IMPORTANT THAT YOU READ AND UNDERSTAND THIS GUIDE BEFORE ATTEMPTING TO
ASSEMBLE AND USE YOUR NEW PROAIM WING HANDHELD STEADYCAM.
SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS AVAILABLE 'ON
LINE' BY CONTACTING OUR SALES REPRESENTATIVE.
INTRODUCTION
The new HAND HELD PROAIM WING with new design of weight disc and gimbal. The PROAIM
WING is a lightweight stabilizer for cameras up to 3.5kg. The Quick release plate of the PROAIM
WING HANDHELD STEADYCAM is High quality quick release universal system for camera.
WHAT’S IN THE BOX
Please inspect the contents of your shipped package to ensure you have received all that is pic-
tured and listed below. The grey foam shipping /storage container has been especially designed
to protect your purchase while in transit and is a good place to keep your PROAIM WING
HANDHELD STEADYCAM when not in use.
CONTENTS OF SHIPPING BOX :
PROAIM Wing Handheld stabilizer
Quick Release plate with adapter
4 x Counter Weight discs
Weight Shank
Docking stand
Handle
Accessory Mounng
plate
Adapter for Accessory
Mounng plate
Storage Case
ASSEMBLING THE PROAIM WING HANDHELD STEADYCAM
Screw-in the handle to the stabilizer Arm.
Now loosen the red knob as shown in the image, remove the camera mounng plate and se-
cure your camera on it with the help of screw driver.
PROAIM WING HANDHELD STEADYCAM 3
If you wish to aach provided Quick release on the wing steadycam, follow these steps:
Loosen the ratchet knob and release the QR plate by pressing the pin. Aach the camera
plate of Wing Stabilizer to the base of QR Adapter.
Re-aach the camera plate to Stabilizer and secure it by ghtening the red knob as shown in
the image.
Secure your camera on QR plate, insert the camera set up to QR Adapter and ghten the
ratchet knob to secure.
Now aach the weight disc to weight shank as per your requirement. then loosen the red
knob, insert the weight shank to the base of stabilizer and ghten the knob to secure.
Take the accessory mounng plate adapter & knob, aach accessory mount plate to stabilizer
with the help of adapter and knob. Tighten it properly to secure.
PROAIM WING HANDHELD STEADYCAM 4
Place the handle of stabilizer on provided docking stand for balancing.
Camera plate has also back & forth adjustment for
quick balancing.
You can adjust the handle back & forth for balancing.
MAINTENANCE
Bearing Maintenance
The Main Bearing on your PROAIM WING STABILIZER is of metal construcon and parally en-
closed by the Bearing assembly.
If aer a period of me your bearings don’t turn smoothly, lubricate with a minimum of light ma-
chine oil. Light lubricang oil can also be used on the Yoke and Handle Bearings.
Be sure to keep oil away from your camera, & clean up any over spill.
Cleaning
Do not use solvents or harsh cleaners of any kind on your PROAIM WING STABILIZER.
If the unit becomes dirty, use a damp so cloth or sponge and a mild detergent to gently clean
external parts.
Storage
Should you need to store your PROAIM WING STABILIZER for a long period of me then place the
unit upright in a dry or low to normal humidity area whenever possible. If you are unable to nd
this kind of environment then we suggest you store the unit in an airght plasc container or bag.
Standing the unit upright is preferred as it alleviates stress on the system.
PROAIM WING HANDHELD STEADYCAM 5
Pracce makes perfect - Walking the line
Pracce this simple exercise to master your PROAIM WING STABILIZER
with professional results.
Using masking or gaers tape, create a cross mark on a at and even wall.
The mark becomes your framing center. On the oor leading up to the
cross mark, lay a straight tape line of about 20 feet. Pracce walking the
line, while keeping the cross mark center framed and in focus. With a bit
of eort, dramac uid like movements will become second nature and
provide producon value to all your set ups.
Note:
The PROAIM WING STABILIZER doesn’t work under water, nor is it waterproof. Avoid direct expo-
sure to rain, water spray or any harsh environment.
The bearings are not sand proof. Avoid geng dirt or sand in them.
YOUR PROAIM WING HANDHELD STEADYCAM
ALL DRESSED UP AND READY TO GO
WARRANTY
We oer a limited me warranty for our products. For Mechanical products we provide a 6
month warranty & for electronic products we provide a 3 month warranty from the date of pur-
chase.
PROAIM WING HANDHELD STEADYCAM 6
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import du-
es are applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do-
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,
or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, Nominal
cost of the product & Actual shipping cost will be charged.
Donot send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
best to help you out.
For any other assistance you can reach us via email.
Table des matières
Autres manuels PROAIM Accessoires pour appareils photo
PROAIM
PROAIM JB-AS08-00 Manuel utilisateur
PROAIM
PROAIM Gravita Manuel utilisateur
PROAIM
PROAIM CG-014-00 Manuel utilisateur
PROAIM
PROAIM Tango P-TNGO-01 Manuel utilisateur
PROAIM
PROAIM VI-CYRS-01 Manuel utilisateur
PROAIM
PROAIM P-VR Manuel utilisateur
PROAIM
PROAIM P-W5P24-BASE Manuel utilisateur
PROAIM
PROAIM CST-100-01 Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM FLCM-GAXS Manuel utilisateur
PROAIM
PROAIM LV-3WAY-01 Manuel utilisateur
PROAIM
PROAIM QR-WV-710 Manuel utilisateur
PROAIM
PROAIM FF-WRLS-DR-ONE Manuel utilisateur
PROAIM
PROAIM CINEMA TP-BIPT-01 Manuel utilisateur
PROAIM
PROAIM WS-284-00 Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM TRK-4P Manuel utilisateur
PROAIM
PROAIM 14ft. Jib Arm with Jib Stand Manuel utilisateur
PROAIM
PROAIM SnapRig Universal Manuel utilisateur
PROAIM
PROAIM Flylite Manuel utilisateur
