PROAIM Astra Manuel utilisateur
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Astra 8 & 12 Camera Jib Crane
Assembly Manua l
Astra comes with a back secon, a front secon with your
choice of camera mount, and vercal and horizontal
counterweight bars.
Camera Mount With Over Slung Mount.
Extension Secon - 4
Extension Camera Plate
Vercal Counterweight Bar
LCD Mounng Bracket
Tightening knobs
2
Using Tripod Head
Remove the quick release plate from the tripod
head. Screw into the crane’s mount, located on
the rear secon. 1/4”-20 & 3/8”-16 threads
available. Do not aempt to use the lt funcon
on the uid head with the crane aached.
With the stand mount aached to the crane,
set it on top of the stand’s main sha. Insert
the knob into the groove, and ghten to
secure.
The rear secon has an interior connecng bar
extension out. This slides into the front secon
or extension. Tighten the knobs to secure the
secons together.
Aer inserng the connecng bar, insert the
knob into the coupler and ghten knob into
the groove.
Mounng on Support Stand:
Assembly for 8 Astra Jib
Connecng the Jib secons
Astra Jib Setup
Add the 4 extension secon to the rear
secon and secure properly. Next, aach the
main head secon to the extension secon.
Tighten the knobs to secure the secons
together.
Assembly for 12 Astra Jib
Extend your 8 crane to a 12 crane by adding the 4 extension.
3
Firstly you will need to aach the BS-100 screw
with your uid head then aach the uid head
with your camera plate.
Secure your camera properly as shown.
Mounng Counterweights
Aer the camera is mounted, it is safe to add
counterweights to bring the crane into balance.
First, aach the bar that the counterweights will
be placed on. Connect the vercal
counterweight bar to the bolt.
NOTE: When the proper amount of counterweight has been added, the crane will rest in a horizontal
posion. Moons will be smooth and eortless. Note, the type of camera and mounng posion will aect
the balance. If the mounted camera is front heavy then mount the vercal bar in the rst hole.
Manual lt mode is achieved by loosening the
knob & removing the pin at the top of the stand
mount. Now the handle can be used to lt the
camera independently from the crane’s body.
Manual Tilt Mode
At this point, the crane will be front heavy.
Allow it to rest on the ground. Aach
extension plate by using the provided screw.
Now, aach the camera to the extension plate
by using ¼”-20 universal sized screw; it will
thread from the boom of the camera.
Properly secure your camera.
Camera Mount with Fluid Head
Camera Setup
4
For lower angle
For upper angle
Oponal Tilt Brake
For using lt funcon, loosen the knob to lt
the crane to the desired posion. Tighten back
the knob if you want to put a brake to lt
feature.
Monitor Mounng Bracket
To aach the monitor bracket, screw the knob
into the threaded hole on the crane’s tripod
mount.
LCD/MONITOR are shown securely mounted
on jib.
For straight angle
Below is the manual lt funconality of the camera.
WARNING: when lng manually, always maintain control of the camera. A front heavy camera may
move forward abruptly without noce you need to be very careful at this point.
5
YOUR PROAIM ASTRA CAMERA JIB CRANE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
Table des matières
Autres manuels PROAIM Accessoires pour appareils photo
PROAIM
PROAIM P-TWS-QS Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM Gripmag Manuel utilisateur
PROAIM
PROAIM P-WNG Instruction manuelle
PROAIM
PROAIM P-L2-SL Manuel utilisateur
PROAIM
PROAIM P-18-JS Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM Discovery SR-10 Manuel utilisateur
PROAIM
PROAIM P-WV-2PL-SD Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM BP12C-BMP40R Manuel utilisateur
PROAIM
PROAIM SnapRig Universal Manuel utilisateur
PROAIM
PROAIM FF-FCBE-01 Manuel utilisateur
PROAIM
PROAIM SnapRig CA202 Manuel utilisateur
PROAIM
PROAIM Fly 22 Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM SL-CNL Manuel utilisateur
PROAIM
PROAIM Flylite Manuel utilisateur
PROAIM
PROAIM VI-SPCM-01 Manuel utilisateur
PROAIM
PROAIM SnapRig NATO Manuel utilisateur
