Pro-Ject Audio Systems X2 Manuel utilisateur

1Unpack all items from accessory box. 2Remove dust cover carton from the box. 4

Lift the wrapped turntable out of the box.

5Unpack the power supply. 7Put the drive belt on the pulley

& sub-platter. 8Put the platter on the turntable.

9Remove tonearm twist tie. 11 Put the counterweight in place. 12

Lower the tonearm lift and place the

tonarm between platter & armrest.

13 Balance the tonearm by turning the

counterweight until it stays level.

14 Turn the front scale of the counterweight

to Zero without moving the weight itself.

15 Turn the counterweight counterclockwise

until the scale reads roughly 18.

Put the needle protection cover back

on the cartridge.

counterweight

Connect it E

RCA cable

single adapter

& Allen key

drive belt

Antiskating

Weight

3Unpack the acrylic platter

and subplatter.

6Carefully remove the protection covering.

Remove the needle protection cover.

Put the loop of the Antiskating Weight in

the second groove on the tonearm post.

18 Unpack Dust Cover and put it on

the turntable.

19 Connect to your sound system and you

are ready to enjoy your records!

Small pulley- 33/45 RPM

Big pulley - 78 RPM (round belt)

0°

www.project-audio.com/en/products/x2

Technical Data

Speed

Principle

Speed cariance

Wow & utter

Platter

Main bearing

Tonearm

33, 45, 78 (electronic speed change)

belt drive

33: +/-0,25%; 45: +/-0,20%

33: +/-0,12%; 45: +/-0,10%

30mm thick acryl, 2 kg heavy acryl

Stainless steel

9” carbon/aluminium sandwich tonearm

Eective arm length

Overhang

Eective tonearm mass

Tracking force range

Power consumption

Dimensions

Weight

9“/230 mm

18 mm

13,5 g

0 - 30mN

4.5 W max / 0.3 W standby

460 x 150 x 340 mm (WxHxD) lid closed

10 kg net

X2 Setup Guide

Please read before unpacking.

Getting started:

Make sure you have enough space to unpack your turntable.

Always unpack and setup in a clean enviroment

Important for warranty: Do not throw packaging away.

Unpack the Antiskating stub and screw it

into the pre-drilled hole.

Lower the tonearm with the lift.

Plug in Connect it E

RCA Cable.

Plug in the power

supply.

Autres manuels pour X2

Ce manuel convient aux modèles suivants

Autres manuels Pro-Ject Audio Systems Platine

Pro-Ject Audio Systems

Pro-Ject Audio Systems Juke Box Esprit Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Xtension 12 Evolution Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems VC-S2 ALU Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Essential III RecordMaster Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Essential II Demon Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems T1 Phono SB Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut PRO Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut Carbon Phono/USB Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems 12 Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Essential II/Phono USB Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems X8 Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject 1 Xpression III Comfort Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Perspective Final Edition Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut Carbon DC Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut Carbon DC Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems 2 Xperience Basic + Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject 1 Xpression III Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems RPM 5.1 Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems THE CLASSIC Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems T1 Phono SB Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems RPM 10.1 Evolution Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Xtension Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Juke Box Series Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Xtensions 9 S-Shape Manuel utilisateur

Manuels Platine populaires d'autres marques

Gemini

Gemini CDT-05 MKII Manuel utilisateur

Rotel

Rotel RP-820 Manuel utilisateur

Shuman

Shuman MC-250BT Manuel utilisateur

Stanton

Stanton STR8-150 Manuel utilisateur

Audio Technica

Audio Technica AT-LPW40WN Manuel utilisateur

Crosley

Crosley McQueen CR7011-GY Manuel utilisateur

Reloop

Reloop SMP-1 Manuel utilisateur

auna

auna TT-Classic Plus Manuel utilisateur

COMO AUDIO

COMO AUDIO Turntable Analog Manuel utilisateur

Dual

Dual 1009 F Manuel utilisateur

REED

REED Muse3C Manuel utilisateur

AXIOMTEK

AXIOMTEK OPS883-H Series Manuel utilisateur

Pioneer

Pioneer PL-71 Manuel utilisateur

Vestax

Vestax PDX-a1 Manuel utilisateur

Denon

Denon DP-400 Manuel utilisateur

Dual

Dual 504 Manuel utilisateur

Audio-Techica

Audio-Techica AT-LP60XBT Manuel utilisateur

Goldring

Goldring G99 Manuel utilisateur