Pro-Ject Audio Systems Debut Carbon EVO Manuel utilisateur

If necessary, level the turntable by

adjusting the feet. Put the counterweight in place.

Put a record on the platter.

Balance the tonearm so it stays level by

turning the counterweight forwards and

backwards on the rod.

Debut Carbon EVO

Setup Guide

Carefully remove the protection covering.

Turn the whole counterweight counter-

clockwise until the scale reads 18 - 20.

Put the loop of the Anti Skating Weight in

the second groove on the tonearm post.

Turn the front dial of the counterweight

(not the whole weight) so the ‘0’ is in line

with marker at the back of the tonearm.

Remove the needle protection cover.

Place the tonearm between platter

and armrest.

Unpack Dust Cover and put it on the

turntable.

Connect to your hi-system and enjoy

your music!

Tonearm is fragile!

Getting started:

• Make sure to have enough space to unpack your turntable.

• Always unpack and setup in a clean enviroment.

• Please Do NOT throw away the packaging! If you need a

service or want to return your product, please send them in

the original packaging including all inserts. In case of any

damage in another packaging your dealer cannot guaran-

tee a full refund.

• complete manual:

www.project-audio.com/en/product/debut-carbon-evo

1 32

810 11

13 15

a) Anti Skating Weight

b) Adapter for 7“ singles

c) Connect it E RCA cable

d) Round belt for 78 RPM

e) Standard at belt for 33/45 RPM

a) b) c)

d) e)

Unpack all items from accessory bag. Remove dust cover carton from the box. Lift the wrapped turntable out of the box.

Unpack the counterweight. Unpack the power supply. Unpack the platter.

Put the drive belt on the pulley

and sub-platter.

Use the rocker switch to select the

playback speed.

Remove tonearm twist tie.

0°

21 22

Lower the tonearm with the lift.

Large pulley for round belt (78 RPM)

Put the platter on the turntable.

LEFT: 33 RPM RIGHT: 45 RPM / 78 RPM

STOPS THE MOTOR

The turntable should always be placed on

a at surface. Check with a spirit level.

Balance the tonearm so it stays level by

turning the counterweight forwards and

backwards on the rod.

0°

Debut Carbon EVO

Connect to any amp with integrated phono amplier or

use an external phono preamp like our Tube Box S2.

Need help?

Feel free to contact us. We have experienced partners

all over the world. Find your dealer here:

www.project-audio.com/en/nd-a-dealer/

Possible Setup:

Pro-Ject Speaker Box 5 S2 (bookshelf speaker)

and Pro-Ject MaiA S2 (stereo integrated amplier).

Speaker cable

Connect it E (RCA Cable)

Speaker cable

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further

advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country.

Warranty repairs will only be aected if the unit is returned correctly packaged. For this reason we recommend keeping the original packaging.

Never return a record player without making sure that is it safely disassembled and correctly packaged in the original packaging according to the

diagrams on the last page of this user guide. Please remove these parts and pack them separately: lid, counterweight, anti-skating weight and belt.

Fit the cartridge protection cap and the transport lock for the tonearm tube, prior to carefully packaging the record player.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the

original packaging. Modication or change to any part of the product by unauthorized persons, release the manufacturer from any liability over and

above the lawful rights of the customer.

Warranty: Terms and Conditions

• A warranty is valid only for products purchased from an authorized Pro-Ject Audio Systems retailer or dealer.

• This warranty oer is limited to the repair of the equipment (which could be a repair or replacement at our discretion, neither of which aects

your original warranty).

• Neither transportation or any other costs, nor any risk for removal, transportation and installation of products is covered by this warranty.

• A warranty is only valid for the original owner. It is not transferable.

• To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase.

• Warranty must be claimed within two years of purchase from an authorized dealer. After this period of time, the warranty will expire.

• The legal warranty obligation exists in addition to this warranty and is not limited by this warranty.

A Pro-Ject Audio Systems warranty relates to claims of defects in materials and/or workmanship at the time of purchase. It does not cover:

• Deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads,

drive belts and cartridges.

• Damages caused by incorrect installation, connection or packing.

• Damages caused by any use other than the correct use described in the user manual, negligence, modications, or use of parts that are not

made or authorized by Pro-Ject Audio Systems.

• Damages caused by faulty or unsuitable ancillary equipment.

• Damages caused by accidents, lightning, water, re heat, war, public disturbances or any other cause beyond the reasonable control of

Pro-Ject Audio Systems and its appointed distributors.

• Products where the serial number has been altered, deleted, removed or made illegible.

• Repairs or modications that have been executed by an unauthorized person.

Commercial Use

Faults caused due to using domestic products in commercial environments or on commercial scales are not covered by warranty. This turntable is

intended for domestic use only. Using them for business applications are done so at your own risk.

Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems

The information was correct at the time of going to press. The manufacturer reserves the right to make changes to the technical specication wit-

hout prior notice as deemed necessary to uphold the ongoing process of technical development.

Autres manuels pour Debut Carbon EVO

Table des matières

Autres manuels Pro-Ject Audio Systems Platine

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject 2 Xperience Comfort Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Xtension 12 Evolution Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems RPM 6.1 SB SuperPack Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems T1 Phono SB Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems RPM 1 Carbon Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject Debut III E Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut III Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject RPM 5 SuperPack Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject RPM 9.1 SuperPack 1 Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Align it DS3 Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject 1 Xpression III Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems RPM 9.2 Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems RPM 1.3 Genie Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject 6 PerspeX DC Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems 2 Xperience Basic + Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems 1 Xpression Carbon Classic Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut RecordMaster II Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems VT-E BT L Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut Carbon DC Esprit SB Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut Carbon DC Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems 1 Xpression Classic Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems VC-S Mise à jour du firmware

Pro-Ject Audio Systems

Pro-Ject Audio Systems Stylus Balance Manuel utilisateur

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject RPM 9.1 Manuel utilisateur

Manuels Platine populaires d'autres marques

Gemini

Gemini CDT-05 MKII Manuel utilisateur

Rotel

Rotel RP-820 Manuel utilisateur

Shuman

Shuman MC-250BT Manuel utilisateur

Stanton

Stanton STR8-150 Manuel utilisateur

Audio Technica

Audio Technica AT-LPW40WN Manuel utilisateur

Crosley

Crosley McQueen CR7011-GY Manuel utilisateur

Reloop

Reloop SMP-1 Manuel utilisateur

auna

auna TT-Classic Plus Manuel utilisateur

COMO AUDIO

COMO AUDIO Turntable Analog Manuel utilisateur

Dual

Dual 1009 F Manuel utilisateur

REED

REED Muse3C Manuel utilisateur

AXIOMTEK

AXIOMTEK OPS883-H Series Manuel utilisateur

Pioneer

Pioneer PL-71 Manuel utilisateur

Vestax

Vestax PDX-a1 Manuel utilisateur

Denon

Denon DP-400 Manuel utilisateur

Dual

Dual 504 Manuel utilisateur

Audio-Techica

Audio-Techica AT-LP60XBT Manuel utilisateur

Goldring

Goldring G99 Manuel utilisateur