Powerware 9315 Manuel utilisateur

Operation

Manual

Uninterruptible Power

Supply

200 kVA -- 300 kVA

164201036 Rev. D

9315

ii Powerware 9315 (200 kVA ---300 kVA) Operation

164201036 Rev. D 041500

------------------------------------------------------------------------

----------------------------------

IMPORTANT SAFETY INSTRUCTIONS

Instructions Importantes Concernant La Sécurité

SAVE THESE INSTRUCTIONS

Conserver Ces Instructions

This manual contains important instructions for your Uninterruptible Power

Supply (UPS) system. You should follow these instructions during the

installation and maintenance of the UPS, options, accessories, and batteries.

Cette notice contient des instructions importantes

concernant la sécurité.

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

their own expense.

WARNING:

This is a product for restricted sales distribution to informed partners. Installation

restrictions or additional measures may be needed to prevent disturbances.

iii

Powerware 9315 (200 kVA ---300 kVA) Operation

164201036 Rev. D 041500

Table of Contents

1Introduction 1............................................

Using This Manual 1............................................

For More Information 2.........................................

Getting Help 2.................................................

2Getting Started 3.........................................

Looking Inside the UPS 4.......................................

UPS Standard Features 5.......................................

Monitor Panel 5.............................................

Control Panel 5.............................................

Communication Panel 5.....................................

Computer Interface 5........................................

Summary Alarm Contacts 5..................................

Building Alarm Monitoring 5..................................

Input Filter 5................................................

Emergency Load Off 5.......................................

Automatic Battery Charge Current Limit 5......................

Installation Features 6.......................................

Options and Accessories 6......................................

Battery 6...................................................

External Battery Disconnect 6................................

Power Distribution Module

(available for North American voltages only) 6...............

Upgrade Capability 6........................................

Remote Monitor Panel 6.....................................

Relay Interface Module 6.....................................

Isolation Transformer 6......................................

Modem 7..................................................

Customer Convenience Outlet 7..............................

Safety Considerations 7.........................................

Symbols, Controls, and Indicators 8..............................

3Understanding UPS Operation 9...........................

Normal Mode 10................................................

Bypass Mode 11................................................

Battery Mode 12................................................

Monitoring and Controlling UPS Operation 13......................

iv Powerware 9315 (200 kVA ---300 kVA) Operation

164201036 Rev. D 041500

4Starting and Stopping the UPS 15..........................

Using the Control Panel 15.......................................

To Place the UPS in Normal Mode 16...........................

To Shut Down the UPS from Normal Mode 17...................

To Start the UPS in Bypass Mode 17...........................

To Shut Down Power to the Critical Load

While in Bypass Mode 17..................................

5Using the Monitor Panel 19.................................

Using the LCD Screen 20........................................

Using the Pushbuttons 21........................................

Adjusting the Contrast 21........................................

Using the Load Off Pushbutton 21.................................

Reading the Status Indicators 22..................................

Using the Menu Options 23.......................................

6Using Features and Options 31.............................

Building Alarm Monitoring 31.....................................

Summary Alarm Contacts 32.....................................

Remote Monitor Panel 33........................................

Battery Cabinets 35.............................................

External Battery Disconnect 35....................................

Relay Interface Module 36........................................

Supervisory Contact Module 37...................................

7Serial Communications 39.................................

Locating the Communications Panel 40............................

Connecting Equipment to a Serial Port 41..........................

Configuring the Serial Ports 43....................................

Mode 44....................................................

Rate 44.....................................................

Data/Stop 45................................................

Handshaking 45.............................................

Disabled (No Handshaking) 45................................

XON/XOFF 45...............................................

Save 45.....................................................

Default Settings 45...........................................

Terminal Mode 46...............................................

Printing Selected Information 46...............................

Entire Log (Ctrl + P) 47.......................................

Meters Printout (Ctrl + M) 48..................................

System Information Printout (Ctrl + A) 48.......................

Battery Test Printout (Ctrl + B) 49..............................

Powerware 9315 (200 kVA ---300 kVA) Operation

164201036 Rev. D 041500

System Configuration 50.........................................

System Configuration Mode Main Menu 50......................

Program Building Alarms 50...................................

Enable/Disable Default Functions 51...........................

Customize Alarm Messages 52................................

Program Unit Name 52.......................................

Adjust Output Voltage 53.....................................

Change Password 53.........................................

Battery Test Setup 54.........................................

Modify Low Battery Time 55...................................

Calibration Mode 55.............................................

Computer Mode 55..............................................

Remote Monitor Mode 55........................................

8Remote Notification 57.....................................

Remote Notification Features 58..................................

Description of Operation 59......................................

Call Answer 59..............................................

Call Out 59..................................................

Housekeeping 60............................................

Hardware Requirements 61.......................................

Configuring the Modem 62.......................................

Basic Modem Configuration 62................................

Configuring the Modem to Call a Remote Computer 63...........

Configuring the Modem to Call a Numeric Pager 64..............

Configuring the Modem to Answer Incoming Calls 65.............

Final Modem Configuration 66.................................

UPS Setup Configuration 67......................................

User-Selected Events 68.........................................

9Maintaining the UPS System 71.............................

Important Safety Instructions 71...................................

Performing Preventive Maintenance 73.............................

Maintenance Training 73.........................................

10 Product Specifications 75.................................

System Input 75................................................

System Output 76...............................................

Environmental Specifications 77..................................

Battery Specifications 77.........................................

vi Powerware 9315 (200 kVA ---300 kVA) Operation

164201036 Rev. D 041500

11 Responding to System Events 79...........................

System Event Horns 79..........................................

System Event Lights 79..........................................

System Event Messages 80......................................

12 Using the LOAD OFF Pushbutton 83........................

To use the LOAD OFF Pushbutton 83..............................

Resetting the UPS System after Load Off 83........................

vii

Powerware 9315 (200 kVA ---300 kVA) Operation

164201036 Rev. D 041500

List of Figures

Figure 1. Typical Powerware Plus UPS System 3.....................

Figure 2. Main Elements of the UPS System 4.......................

Figure 3. Path of Current Through the UPS in Normal Mode 10.........

Figure 4. Path of Current Through the UPS in Bypass Mode 11.........

Figure 5. Path of Current Through the UPS in Battery Mode 12.........

Figure 6. Location of the Monitor Panel and the Control Panel 13.......

Figure 7. UPS Control Panel 15.....................................

Figure 8. UPS Monitor Panel 19....................................

Figure 9. Parts of the LCD Screen

(Typical for Powerware Plus 300 480/480V Unit) 20...........

Figure 10. System Meters Screen

(Typical for Powerware Plus 300 480/480V Unit) 23...........

Figure 11. Load Amps Meters Screen 24..............................

Figure 12. Event History Log Screen 25...............................

Figure 13. Active System Events Screen 26...........................

Figure 14. Unit Statistics Screen 27..................................

Figure 15. Mimic Screen 28.........................................

Figure 16. Time Setup Screen 29....................................

Figure 17. Port Setup Screen 30.....................................

Figure 18. External Connections for Building Alarm Monitoring 31........

Figure 19. Summary Alarm Contacts 32..............................

Figure 20. Remote Monitor Panel 33.................................

Figure 21. Relay Interface Module 36.................................

Figure 22. Supervisory Contact Module 37............................

Figure 23. Location of Communications Ports on the UPS

(Powerware Plus 300) 40..................................

Figure 24. Port 1 Pin Assignments 41.................................

Figure 25. Port 2 Pin Assignments 42.................................

Figure 26. Setup Serial Port 1 Screen 43..............................

Figure 27. Event History Log 47.....................................

Figure 28. System Meters 48........................................

Figure 29. Battery Test Log 49.......................................

viii Powerware 9315 (200 kVA---300 kVA) Operation

164201036 Rev. D 041500

List of Tables

Table 1. Optional Monitoring Accessories 33........................

Table 2. Pin Assignments for Port 1 (DE---9) 41......................

Table 3. Pin Assignments for Port 2 (DB---25) 42.....................

Table 4. Options Available for Each Communication Port 44...........

Powerware 9315 (200 kVA ---300 kVA) Operation

164201036 Rev. D 041500

Introduction

Congratulations on your purchase of a Powerware9315 Uninterruptible

Power Supply! The Powerware 9315 online power protection can be utilized to

prevent loss of valuable electronic information, minimize equipment downtime,

and/or minimize the adverse effect on equipment production due to unexpected

power problems.

The Powerware 9315 Uninterruptible Power Supply (UPS) continually monitors

incoming electrical power and removes the surges, spikes, sags, and other

irregularities that are inherent in commercial utility power. Working with your

building’s electrical system, the UPS supplies clean, consistent power that your

sensitive electronic equipment requires for reliable operation. And during

brownouts, blackouts, and other power interruptions, one or more optional battery

cabinets can provide emergency power to safeguard your operation.

Your UPS will function automatically and require very little attention during normal

operation. However, you should read and understand the procedures described in

this manual to ensure trouble-free operation. In particular, you should be

thoroughly familiar with the Load Off procedure described in Chapter 12.

Using This Manual

This manual describes the Powerware 9315 UPS routine operation and

maintenance. It also describes optional features and accessories that are available

to enhance UPS operation and performance. The text uses these conventions:

·Bold type highlights important concepts in discussions, key terms in

procedures, and menu options.

·Italic type highlights notes and new terms where they are defined.

·Rectangular boxes containing bold type are warnings or cautions that pertain to

the UPS system or its electrical connections. This important information alerts

you to possible dangers pertaining to personnel safety, UPS or equipment

damage, critical load protection, or operational concerns.

In this manual, the term UPS refers only to the UPS cabinet and its internal

elements. The term UPS system refers to the entire power protection system—the

UPS cabinet and any options or accessories you have installed. The rectifier and

inverter are internal UPS components that are together referred to as the power

processing unit (PPU) of the UPS.

2Powerware 9315 (200 kVA ---300 kVA) Operation

164201036 Rev. D 041500

For More Information

This manual describes how your UPS system works. For more information about

your system, refer to the following:

164201037 Powerware9315 (200 kVA ---300 kVA) UPS Installation

This manual contains the following information:

·How to prepare your site and plan for installation

·Detailed step-by-step procedures for installing each component of your system

·Detailed illustrations of cabinets and optional accessories, including

dimensions and connection points.

Contact Powerware Corporation Field Service for information on how to obtain

copies of this manual.

Getting Help

If you have a question about any of the information in this manual, or if you have a

question this manual does not answer, please call Powerware Corporation Field

Service:

United States 1-800-843-9433

Canada 1-800-461-9166

Outside the U.S. Call your local representative

Autres manuels pour 9315

Table des matières

Autres manuels Powerware UPS

Powerware

Powerware 9125 Manuel utilisateur

Powerware

Powerware 5115 Manuel utilisateur

Powerware

Powerware 9335 Manuel utilisateur

Powerware

Powerware 5140 Manuel utilisateur

Powerware

Powerware 9305 HS Series Manuel d'utilisation

Powerware

Powerware 9120 Manuel utilisateur

Powerware

Powerware Plus 80 Mode d’emploi

Powerware

Powerware BPIV Manuel utilisateur

Powerware

Powerware 9315s Manuel utilisateur

Powerware

Powerware Prestige series 9 Manuel utilisateur

Powerware

Powerware 3105 Manuel utilisateur

Powerware

Powerware UPS 1000 - 2200 Manuel utilisateur

Powerware

Powerware 5115 Manuel utilisateur

Powerware

Powerware 9305 Manuel d'utilisation

Powerware

Powerware 5125 Manuel utilisateur

Powerware

Powerware 300 VA Manuel utilisateur

Powerware

Powerware 9125 Manuel utilisateur

Powerware

Powerware Prestige series 9 Manuel utilisateur

Powerware

Powerware 9910 p Series Manuel utilisateur

Powerware

Powerware 5140 Manuel utilisateur

Powerware

Powerware P93 Manuel utilisateur

Powerware

Powerware 9330 Manuel utilisateur

Powerware

Powerware 5125 Manuel utilisateur

Powerware

Powerware 9120 Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur