Polycom 5300LF2 VBP-E Series Instructions d'installation

Polycom® VBP™ 5300LF2 System

Hardware Guide

June 2011 |3725-73553-001A

5300LF2 Hardware Guide

Trademark Information

Polycom®, the Polycom “Triangles” logo, and the names and marks associated with Polycom’s products are trademarks and/or service marks of

Polycom, Inc., and are registered and/or common-law marks in the United States and various other countries.

All other trademarks are the property of their respective owners.

Polycom, Inc.

4750 Willow Road

Pleasanton, CA 94588-2708

USA

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the

express written permission of Polycom, Inc. Under the law, reproducing includes translating into another language or format.

As between the parties, Polycom, Inc., retains title to and ownership of all proprietary rights with respect to the software contained within its

products. The software is protected by United States copyright laws and international treaty provision. Therefore, you must treat the software like

any other copyrighted material (e.g., a book or sound recording).

Every effort has been made to ensure that the information in this document is accurate. Polycom, Inc., is not responsible for printing or clerical

errors. Information in this document is subject to change without notice.

5300LF2 Hardware Guide

5300LF2 VBP-E Series Physical connections and LED’s

A Erase

1 Click - Nothing

2 Clicks - Reset CLI password and restarts the system

3 Clicks - Restore to factory default

B Port 3 - Management interface

1 x 10/100/1000 Mbps Ethernet port for optional management network

connectivity, this interface must not be on the same network as the WAN or LAN

subnets. This network cannot be within a subnet contained in a “Route”

statement

C Port 2 - WAN interface

1 x 10/100/1000 Mbps Ethernet port for connectivity to the WAN or Internet

network connectivity

Default IP: none

D Port 1 - LAN interface 1 x 10/100/1000 Mbps Ethernet port for LAN network connectivity

Default IP: 192.168.1.1

E Console 1 x RS-232 8 pin modular console port for management – 9600-N-8-1 NONE for

flow control – 8 pin modular to DB9 cable provided in system box

F USB Currently not used

5300LF2 Hardware Guide

Symbol Function Color Signal

Power Status Green

Off – No Power, the system is off

On – Power is good, the system is on

Data Status Red

Off – No data access to the IDE drive

On – Data is being written to the IDE drive

5300LF2 Hardware Guide

Label Color Indication Status

Green or

other On

1: Ethernet port is receiving power

2: Good link between the Ethernet port and the connected switch

Off

1: The adapter and switch are not receiving power

2: No connection between both ends of the network cable, check cable,

replace cable.

ACK/LINK

Green or

other Flashing The adapter is sending and receiving network data. The frequency of the

flashing varies with the amount of data being transferred.

Yellow On ACK/LINK LED must be on. This LED will show the system operating at

1000 Mbps

Green On ACK/LINK LED must be on. This LED will show the system operating at

100 Mbps

Speed

Off ACK/LINK LED must be on. This LED will show the system operating at

10 Mbps

5300LF2 Hardware Guide

H Input Power Socket Accepts 3-pin Shroud Female plug for input power

I On/Off Switch Used to turn the system on and off

J VGA Currently not used

5300LF2 Hardware Guide

Connecting to the 5300LF2 VBP-E Series for the First Time

The VBP Series appliance is shipped with a pre-configured IP address on Port 1 of 192.168.1.1

1. Connect the 3-pin Shroud female plug of the power cord into the input power socket in the system shown as (H) in the above figures and

the other end to a wall AC outlet.

2. Turn the system power on by pressing on the top part of the power switch shown as (I) in the above figures.

3. Connect a computer using an IP address of 192.168.1.2 and subnet mask of 255.255.255.0 to Port 1 shown as (D) in the above figures

with either a Ethernet switch or a Ethernet cable wired directly to the computer.

4. Launch a Web browser on the computer and enter the http://192.168.1.1 Press Return. The main configuration menu appears - enter

the username root and the password default.

5. The EULA license agreement will now be displayed. After reading the license agreement, click “I agree” at the bottom to continue

configuring the system.

Configure the Network parameters as defined in the Configuration Guide contained on the VBP Documentation Library CD provided with the

system. The Configuration Guide is also available on the Polycom Web site.

5300LF2 Hardware Guide

5300LF2 VBP-ST series Physical connections and LED’s

A Erase

1 Click - Nothing

2 Clicks - Reset CLI password and restarts the system

3 Clicks - Restore to factory default

B Port 3 - Management interface

1 x 10/100/1000 Mbps Ethernet port for optional management network

connectivity, this interface must not be on the same network as the WAN or LAN

subnets. This network cannot be within a subnet contained in a “Route” statement

C Port 2 - Provider interface

1 x 10/100/1000 Mbps Ethernet port for connectivity to the Provider or LAN

network connectivity

Default IP: none

D Port 1 - Subscriber interface

1 x 10/100/1000 Mbps Ethernet port for Subscriber or WAN/Internet network

connectivity

Default IP: 192.168.1.1

E Console 1 x RS-232 8 pin module console port for management – 9600-N-8-1 NONE for

flow control – 8 pin modular to DB9 cable provided in system box

F USB Not used

5300LF2 Hardware Guide

Symbol Function Color Signal

Power Status Green

Off – No Power - the system is off

On – Power is good - the system is on

Data Status Red

Off – No data access to the IDE drive

On – Data is being written to the IDE drive

5300LF2 Hardware Guide

Label Color Indication Status

Green or

other On

1: Ethernet port is receiving power

2: Good link between the Ethernet port and the connected switch

Off

1: The adapter and switch are not receiving power

2: No connection between both ends of the network cable, check cable,

replace cable.

ACK/LINK

Green or

other Flashing The adapter is sending and receiving network data. The frequency of the

flashing varies with the amount of data being transferred.

Yellow On ACK/LINK LED must be on. This LED will show the system operating at

1000 Mbps

Green On ACK/LINK LED must be on. This LED will show the system operating at

100 Mbps

Speed

Off ACK/LINK LED must be on. This LED will show the system operating at

10 Mbps

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Polycom Système de conférence

Polycom

Polycom Video Media Center VMC 1000 Manuel utilisateur

Polycom

Polycom VS4000 Manuel utilisateur

Polycom

Polycom CX5000 Guide de configuration rapide

Polycom

Polycom Vortex EF2280 Manuel utilisateur

Polycom

Polycom VSX 3000 Manuel de service

Polycom

Polycom RealPresence Group 500 systems Instructions d'utilisation

Polycom

Polycom RealPresence Group 300 Instructions de montage

Polycom

Polycom ViewStation SP128 Manuel utilisateur

Polycom

Polycom HDX 7000 Series Manuel utilisateur

Polycom

Polycom RealPresence Group Series Comment utiliser

Polycom

Polycom CX5000 Guide de référence rapide

Polycom

Polycom SoundStation IP 7000 Manuel utilisateur

Polycom

Polycom RMX 1000 Manuel utilisateur

Polycom

Polycom Digital Signage 2000 Manuel utilisateur

Polycom

Polycom VS4000 Manuel de service

Polycom

Polycom 1725-22886-001/A Manuel utilisateur

Polycom

Polycom VSX 8800 Manuel d'installation et d'exploitation

Polycom

Polycom RealPresence Group 300 Manuel utilisateur

Polycom

Polycom HDX 9000 Series Manuel utilisateur

Polycom

Polycom SIP 3.0.2 Manuel utilisateur

Polycom

Polycom SoundPoint IP 500 Manuel utilisateur

Polycom

Polycom realpresence group 550 Manuel utilisateur

Polycom

Polycom VIEWSTATION EX Manuel de service

Polycom

Polycom V500 Manuel utilisateur

Manuels Système de conférence populaires d'autres marques

Kramer

Kramer VIA GO Manuel utilisateur

AVT

AVT MAGIC AC1 Go Manuel utilisateur

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur

Sony

Sony PCS-I150 Manuel utilisateur

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuel utilisateur

Prentke Romich Company

Prentke Romich Company Vanguard Plus Mode d’emploi

Speakerbus

Speakerbus iD 712 Manuel utilisateur

Trelleborg

Trelleborg SafePilot CAT PRO Manuel utilisateur

Sennheiser

Sennheiser ADN Manuel utilisateur

ADTRAN

ADTRAN NetVanta 7100 Manuel utilisateur

AINA

AINA PTT Voice Responder Manuel utilisateur

Yamaha

Yamaha ProjectPhone PJP-100H Manuel utilisateur

vissonic

vissonic VLI Series Manuel utilisateur

Panasonic

Panasonic KX-VC500 Manuel utilisateur

Poly

Poly Trio 8300 Manuel utilisateur

Crestron

Crestron Mercury CCS-UCA-SMK Dessin dimensionnel

Inmarsat

Inmarsat mini M Manuel utilisateur

Tenveo

Tenveo ALL-IN-ONE Manuel utilisateur