Polycom VSX 8000 Series Manuel utilisateur

Quick Setup for the

Polycom Mobile Responder

Polycom® and the Polycom logo are registered trademarks and

Mobile Responder

™

and VSX

™

are trademarks of Polycom, Inc.

1725-23337-001/A

The Polycom® Mobile Responder™ is a complete video

conferencing system packaged in a portable case. Based

on Polycom’s VSX™ 8000 system, the Mobile Responder

includes a built-in display, camera, microphone, and IP

network interface.

17” display Speaker Camera IR receiver

Connection panel Accessory compartment Microphone

The Mobile Responder weighs 39 pounds (18 kg). You

should get help lifting it if you cannot carry this much weight.

The Mobile Responder complies with FAA carry-on luggage

regulations for overhead storage. Although it is built to

withstand the rigors of travel, you should handle the Mobile

Responder as you would handle a laptop. For example,

when using it, place it on a secure, flat surface.

IR activity

indicator

Side

panel

Note

Connecting Equipment to the Connection Panel

The equipment shown in the illustration below is optional. You

can also add an optional ISDN/V.35 network interface card to

the Mobile Responder as described in the User’s Guide for

the Polycom Mobile Responder. For more information about

purchasing optional components, contact your Polycom

distibutor.

LAN

111

VGA VGA

Line

Out

Mic

Audio InAudio In

2668-23206-ENG

LAN

VSX

To connect the power cord:

For complete information about how to use the VSX 8000 to

place calls and perform other video conferencing tasks, refer

to the VSX 8000 series documentation. For more information

about the Mobile Responder, refer to the User’s Guide for the

Polycom Mobile Responder. These documents are available

on the CDs that you received with your Mobile Responder or

at www.polycom.com/videodocumentation.

1. Open the panel on the side of the Mobile Responder by

2. Make sure you have the appropriate power cord for your

3. Connect the other end of the power cord to a wall outlet.

The system can accept AC voltages between 98 and 250 VAC.

To power on the Mobile Responder:

1. Press the power button located inside the side panel to

the ON position.

2. Wait one to two minutes for the system to completely

power on.

When the system is powered on, the VSX 8000 home screen

appears on the display.

pressing down on the latch.

country, and connect one end of the cord to the power

connector inside the side panel.

Powering on the Mobile Responder

Performing Video Conferencing Tasks

Autres manuels pour VSX 8000 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Polycom Système de conférence

Polycom

Polycom RealPresence Group Series Instructions de montage

Polycom

Polycom RealPresence Group Series Manuel utilisateur

Polycom

Polycom VSX 8000 Series Manuel utilisateur

Polycom

Polycom realpresence trio 8800 Manuel utilisateur

Polycom

Polycom 1725-22886-001/A Manuel utilisateur

Polycom

Polycom VSX Series Manuel de service

Polycom

Polycom Trio Series Manuel utilisateur

Polycom

Polycom RealPresence Practitioner Cart 8000 Manuel utilisateur

Polycom

Polycom QSX Manuel utilisateur

Polycom

Polycom RealPresence Group Series Instructions d'utilisation

Polycom

Polycom RealPresence Centro Manuel utilisateur

Polycom

Polycom iPower 9400 Manuel utilisateur

Polycom

Polycom RealPresence Group Series Instructions d'utilisation

Polycom

Polycom SoundStation IP 7000 Manuel utilisateur

Polycom

Polycom CX7000 series Manuel de service

Polycom

Polycom RealPresence Medialign 255 Slimline Base Manuel utilisateur

Polycom

Polycom ViewStation SP384 Manuel utilisateur

Polycom

Polycom VSX 3000 Manuel utilisateur

Polycom

Polycom RealPresence Centro Manuel

Polycom

Polycom HDX 9000 Series Manuel utilisateur

Polycom

Polycom HDX 8000 series Manuel utilisateur

Polycom

Polycom Salmon Arm S203 Manuel utilisateur

Polycom

Polycom VS4000 Instructions d'utilisation

Polycom

Polycom VSX 7000e Series Manuel utilisateur

Manuels Système de conférence populaires d'autres marques

Kramer

Kramer VIA GO Manuel utilisateur

AVT

AVT MAGIC AC1 Go Manuel utilisateur

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur

Sony

Sony PCS-I150 Manuel utilisateur

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuel utilisateur

Prentke Romich Company

Prentke Romich Company Vanguard Plus Mode d’emploi

Speakerbus

Speakerbus iD 712 Manuel utilisateur

Trelleborg

Trelleborg SafePilot CAT PRO Manuel utilisateur

Sennheiser

Sennheiser ADN Manuel utilisateur

ADTRAN

ADTRAN NetVanta 7100 Manuel utilisateur

AINA

AINA PTT Voice Responder Manuel utilisateur

Yamaha

Yamaha ProjectPhone PJP-100H Manuel utilisateur

vissonic

vissonic VLI Series Manuel utilisateur

Panasonic

Panasonic KX-VC500 Manuel utilisateur

Poly

Poly Trio 8300 Manuel utilisateur

Crestron

Crestron Mercury CCS-UCA-SMK Dessin dimensionnel

Inmarsat

Inmarsat mini M Manuel utilisateur

Tenveo

Tenveo ALL-IN-ONE Manuel utilisateur