Polycom SoundStructure Systems Manuel utilisateur
Version 1.0 |January 2011 |1725-33214-001/A
User’s Guide for Polycom®
SoundStructure®Systems and the
Polycom Touch Control™ Device
© 2011 Polycom, Inc. All rights reserved.
Polycom, Inc.
4750 Willow Road
Pleasanton, CA 94588-2708
USA
No part of this document may be reproduced or transmitted in any form or by any means, electronic or
mechanical, for any purpose, without the express written permission of Polycom, Inc. Under the law, reproducing
includes translating into another language or format.
As between the parties, Polycom, Inc., retains title to and ownership of all proprietary rights with respect to the
software contained within its products. The software is protected by United States copyright laws and international
treaty provision. Therefore, you must treat the software like any other copyrighted material (e.g., a book or sound
recording).
Every effort has been made to ensure that the information in this manual is accurate. Polycom, Inc., is not
responsible for printing or clerical errors. Information in this document is subject to change without notice.
ii
Trademark Information
Polycom®, the Polycom “Triangles” logo, and the names and marks associated with Polycom’s products are
trademarks and/or service marks of Polycom, Inc., and are registered and/or common-law marks in the United
States and various other countries.
All other trademarks are the property of their respective owners.
Patent Information
The accompanying product is protected by one or more U.S. and foreign patents and/or pending patent
applications held by Polycom, Inc.
Customer Feedback
We are constantly working to improve the quality of our documentation, and we would appreciate your feedback.
Polycom, Inc. iii
Contents
Using the Touch Control Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Powering the Touch Control On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Calling and Answering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Answering a Call .......................................................................................... 2
Placing a Call ................................................................................................. 4
Call Screen ..................................................................................................... 5
Flash Hook ..................................................................................................... 6
Ending a Call ................................................................................................. 6
Adjusting Touch Control Brightness ......................................................... 7
Controlling What You Hear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adjusting Volume ........................................................................................ 8
Muting the Microphones ............................................................................. 8
Adjusting Touch Control Volume .............................................................. 8
Changing the Way Calls Are Answered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Temporarily Ignoring Calls ......................................................................... 9
Answering Audio Calls Automatically ..................................................... 9
User’s Guide for Polycom SoundStructure Systems and the Polycom Touch Control
iv Polycom, Inc.
Polycom, Inc. 1
User’s Guide for Polycom SoundStructure®Systems and
the Polycom Touch Control
Polycom Touch Control Version 1.0
This guide describes how to use the Polycom Touch Control with a
SoundStructure system to initiate calls and control SoundStructure audio
conferencing systems.
This guide assumes that the Polycom Touch Control is paired with a
SoundStructure system for audio conferencing applications. For information
on how to pair a Polycom Touch Control with a SoundStructure system, refer
to the SoundStructure Design Guide.
For information on using a Polycom Touch Control with a Polycom HDX
system, refer to the Users’s Guide for Polycom HDX Systems and the Polycom
Touch Control.
Using the Touch Control Device
You use the touch control device to place audio calls, adjust the volume,
control the mute state, and select options.
Go left and right on the Home screen for
quick access to common calling and
configuration tasks.
Touch the screen to select an item.
Drag your finger across the screen to scroll.
Press Back to go to the previous screen.
Press Home to go to the Home screen.
Use the call screen for
quick access to common
tasks while you are in a
call.
User’s Guide for Polycom SoundStructure Systems with the Polycom Touch Control Device
2Polycom, Inc.
Powering the Touch Control On and Off
To power on the Polycom Touch Control device:
>> Reconnect the LAN cable to the underside of the device.
To power off the Polycom Touch Control device:
1From the Home screen touch User Settings.
2Scroll to the Power section.
3Select Touch Control Power.
4In the menu that appears, select Power Off the Touch Control. If you
choose to power off the Polycom Touch Control device, you must
disconnect and reconnect the LAN cable to power it on again.
To wake up the Polycom Touch Control device:
The touch control goes to sleep after 2 minutes of inactivity. Touch the screen
to wake it up.
Calling and Answering
Answering a Call
There are three primary ways for a SoundStructure telephone call to be
handled with the Polycom Touch Control:
•Prompts you to answer the call manually
•Answers the call automatically (if auto answer is enabled),
•Does not indicate that an incoming call is present if Do Not Disturb is
enabled.
Both the Polycom Touch Control and the SoundStructure system generate an
audible ring tone when an incoming call is present and the system is not in Do
Not Disturb mode.
User’s Guide for Polycom SoundStructure Systems with the Polycom Touch Control Device
Polycom, Inc. 3
If the Polycom SoundStructure system is not configured to answer incoming
calls automatically, you are prompted to answer manually. Touch Answer or
Ignore when a call comes in as shown in the following figure.
User’s Guide for Polycom SoundStructure Systems with the Polycom Touch Control Device
4Polycom, Inc.
Placing a Call
You can use your system to place an audio call by entering a number on the
Place a Call screen.
Calling by Entering a Number
To place a call:
1From the Home screen touch Place a Call.
2In the dialing field, enter the dialing information. The dialing information
will look like 19782922854.
To backspace, touch Delete.
3Touch to place the call.
If the system supports more than one telephone line, you can dial additional
calls.
To place additional calls:
1From the Dial screen touch .
In the dialing field, enter the dialing information. The dialing information
will look like 19782922854.
To backspace, touch Delete.
2Touch to place the call.
User’s Guide for Polycom SoundStructure Systems with the Polycom Touch Control Device
Polycom, Inc. 5
Once all the telephone line interfaces in the SoundStructure system have been
utilized with calls, you cannot place additional telephone calls.
Call Screen
When you are in a call, the Call screen appears. From the Call screen you can
complete these tasks:
•Touch the Volume slider to adjust the volume at your site.
•Touch the Mute icon to mute or unmute your microphones.
•Touch Hang up to end the call.
•Touch Add Call to add another call participant.
•Touch Keypad to send DTMF tones.
If you navigate away from the Call screen during a call, you can return to it at
any time by touching .
User’s Guide for Polycom SoundStructure Systems with the Polycom Touch Control Device
6Polycom, Inc.
Flash Hook
If your analog telephone line supports flash hook, you may execute a flash
command as described below.
To use the Flash command:
1While in a call, touch Keypad. The keypad will appear as in the following
figure.
2Touch the Flash button to flash the first SoundStructure telephony
interface.
3Dial the desired digits.
Ending a Call
To hang up from a call:
1From the call screen touch Hang Up.
2If prompted, confirm that you want to disconnect from the far site(s).
Regardless of the number of SoundStructure telephony interfaces in a call, the flash
button only flashes the first telephony interface as sorted by the phone line’s virtual
channel name.
If the remote participant hangs up first, the SoundStructure system will
automatically hang up if the Auto Hangup feature is enabled in the Polycom
SoundStructure system and the call infrastructure supports auto hangup.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Polycom Système de conférence
Polycom
Polycom RealPresence Trio 8500 Manuel utilisateur
Polycom
Polycom ViaVideo Manuel utilisateur
Polycom
Polycom VSX 3000 Manuel utilisateur
Polycom
Polycom CX5100 Manuel utilisateur
Polycom
Polycom SoundStation Premier Instructions de montage
Polycom
Polycom RealPresence Group Series Manuel utilisateur
Polycom
Polycom VSX Series Manuel de service
Polycom
Polycom VSX 3000 Manuel de service
Polycom
Polycom SoundPoint IP 500 Manuel utilisateur
Polycom
Polycom QSX Manuel utilisateur
Polycom
Polycom QSX Manuel utilisateur
Polycom
Polycom SoundPoint IP 335 Manuel utilisateur
Polycom
Polycom RealPresence Experience Manuel utilisateur
Polycom
Polycom 3000 Manuel utilisateur
Polycom
Polycom Viewstation 128 Manuel utilisateur
Polycom
Polycom RealPresence Group Series Manuel utilisateur
Polycom
Polycom IPOWER 9000 Manuel utilisateur
Polycom
Polycom Instructor RP Manuel utilisateur
Polycom
Polycom ViaVideo Manuel utilisateur
Polycom
Polycom MGC-25 Comment utiliser
Manuels Système de conférence populaires d'autres marques
Kramer
Kramer VIA GO Manuel utilisateur
AVT
AVT MAGIC AC1 Go Manuel utilisateur
ProSoft Technology
ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur
Sony
Sony PCS-I150 Manuel utilisateur
Middle Atlantic Products
Middle Atlantic Products VTC Series Manuel utilisateur
Prentke Romich Company
Prentke Romich Company Vanguard Plus Mode d’emploi
