Planet IGS-4215 Series Manuel utilisateur
Industrial 4-/8-/16-Port 10/100/1000T + 2-Port
100/1000X SFP Managed Gigabit Ethernet Switch
IGS-4215 series
Quick Installation Guide
Table of Contents
1. Package Contents...................................................................... 3
2. Requirements............................................................................ 4
3. Wiring the Power Inputs ............................................................ 5
4. Terminal Setup (IGS-4215-16T2S only) ....................................... 7
4.1 Logging on to the Console................................................... 8
4.2 ConguringIPAddressviatheConsole................................. 9
4.3 StoringCurrentSwitchConguration ...................................11
4.4 SSH Login (IGS-4215-8T2S and IGS-4215-4T2S) .................12
5. Starting Web Management ........................................................13
5.1 LoggingintotheIndustrialManagedSwitch ........................14
5.2 SavingCongurationviatheWeb........................................16
6. RecoveringBacktoDefaultConguration ...................................17
7. Customer Support ....................................................................19
3
1. Package Contents
Thank you for purchasing PLANET Industrial L2/L4 Managed Gigabit
EthernetSwitch,IGS-4215 series. The descriptions of these models are
asfollows:
Models 10/100/1000T
RJ45 Ports
100/1000X
SFP Ports
IGS-4215-4T2S 4 2
IGS-4215-8T2S 8 2
IGS-4215-16T2S 16 2
“Industrial Managed Switch” mentioned in this Quick Installation
GuidereferstotheIGS-4215series.
Openthebox oftheIndustrialManaged Switch and carefullyunpackit.
Theboxshouldcontainthefollowingitems:
IndustrialManaged
Switch x 1
QuickInstallation
Guidex1
Wall-mountPlate
w/Screwsx1Set
DIN-railBracket
w/Screwsx1 SFPDustCapx2 RJ45DustCap
16T2S x 17
8T2S x 8
4T2S x 4
If any item is found missing or damaged, please contact your local
resellerforreplacement.
4
2. Requirements
The Industrial Managed Switch provides local and remote login
interface for management purposes. The following equipment is
necessaryforfurthermanagement:
zWorkstations running Windows XP/2003/Vista/7/8/10/2008/10,
MAC OS X or later, Linux, UNIX, or other platforms are compatible
withTCP/IPprotocols.
zWorkstations are installed with Ethernet NIC (Network Interface
Card)
zSerial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-
RS232converter.
The above Workstations have been installed with terminal
emulator, such as Hyper Terminal included in Windows XP/2003,
putty or tera term.
Serial cable -- one end is attached to the RS232 serial port,
while the other ends to the RJ45 console port of the Industrial
ManagedSwitch.
zEthernet Port Connection
Network cables--Use standard network (UTP) cables with RJ45
connectors.
TheabovePCisinstalledwithWebbrowser.
Note
Itis recommended to useInternetExplorer8.0 or above
to access the Industrial Managed Switch. If the Web
interface of the Industrial Managed Switch is not acces-
sible, please turn off the anti-virus software or firewall
andthentryitagain.
5
3. Wiring the Power Inputs
The Upper Panel of the Industrial Managed Switch consists of one
terminal block connector within 6 contacts for two redundant power
inputs and fault alarm. Please follow the steps below to insert the
power wire.
1.Insert positive/negative DC power wires into contacts 1 and 2 for
Power1or5and6forPower2.
IGS-4215-16T2S
Fault
V1+ V2+
PWR2PWR1
Max. fault loading: 24V, 1A
DC Input: 12-48V , 1.5A max.
AC Input: 24V , 1A max.
1 2 3 4 5 6
Figure 3-1: IGS-4215-16T2S Inlet Power Socket
IGS-4215-8T2S
DC Input: 9-48V
, 1A max.
AC Input: 24V
, 0.5A max.
Max. Fault Alarm Loading: 24V, 1A
V1+ V2+
PWR1 PWR2Alarm
1 2 3 4 5 6
Figure 3-2: IGS-4215-8T2S Inlet Power Socket
6
IGS-4215-4T2S
Max. Fault Alarm Loading: 24V, 1A
DC Input: 9-48V
, 1A max.
AC Input: 24V
, 0.6A max.
V1+ V2+
PWR1 PWR2Alarm
1 2 3 4 5 6
Figure 3-3: IGS-4215-4T2S Inlet Power Socket
2.Tighten the wire-clamp screws for preventing the wires from loos-
ening.
123456
V1+ V1- V2+ V2-
Power 1 Power 2
Note
The wire gauge for the terminal block should be in the
rangefrom12 to 24 AWG.
Note
1. The power input range is DC 12~48V for IGS-
4215-16T2S, DC 9~48V for IGS-4215-8T2S and IGS-
4215-4T2S.
2.Useone power input when using AC 24V.
Caution
PWR1andPWR2mustprovidethesame DC voltage
whileoperatingwithdualpowerinput.
7
4. Terminal Setup (IGS-4215-16T2S only)
Tocongurethesystem,connect aserialcabletoa COM port on a PC
ornotebookcomputer and to the RJ45 typeserial(console)portofthe
IndustrialManagedSwitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1: Industrial Managed Switch Console Connectivity
A terminal program is required to make the software connection to the
IndustrialManagedSwitch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port
shouldbeconguredas:
zBaud:115200
zDatabits:8
zParity:None
zStopbits:1
zFlowcontrol:None
8
4.1 Logging on to the Console
Once the terminal has been connected to the device, power on the
IndustrialManagedSwitchandtheterminalwilldisplay“runningtesting
procedures”.Then,the followingmessageasks tologinusername and
password. The factory default user name and password are shown in
Figure4-1below.
Username:admin
Password:admin
Figure 4-1: Industrial Managed Switch Console Login Screen
The user can now enter commands to manage the Industrial Managed
Switch. For a detailed description of the commands, please refer to the
followingchapters.
Note
1.For security reason, please change and memorize
the new password after this first setup.
2.Only accept command in lowercase letter under
consoleinterface.
9
4.2 ConguringIPAddressviatheConsole
The Industrial Managed Switch is shipped with default IP address as
follows:
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the
IndustrialManagedSwitch,pleaseusetheproceduresasfollows:
Display of current IP address
1.Atthe“IGS-4215-16T2S#”prompt,enter“show ip”.
2.The screen displays the current IP address, subnet mask and
gatewayasshowninFigure4-2.
Figure 4-2: IP Information Screen
10
CongurationoftheIPaddress
1.Atthe“IGS-4215-16T2S #”prompt,enter“congure”.
2.At the “IGS-4215-16T2S (cong)#” prompt, enter the following
commandandpress<Enter>asshowninFigure4-3.
IGS-4215-16T2S(cong)# ip address 192.168.1.100 mask
255.255.255.0
IGS-4215-16T2S(cong)# ip default-gateway 192.168.1.254
The previous command would apply the following settings for the
IndustrialManagedSwitch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 4-3: Conguring IP Address Screen
3.RepeatStep1tocheckiftheIPaddresshaschanged.
If the IP is successfully congured, the Industrial Managed Switch will
apply the new IP address setting immediately. You can access
theWebinterface of theIndustrialManagedSwitch through thenewIP
address.
Autres manuels pour IGS-4215 Series
1
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Planet Changer
Planet
Planet IGS-4215-4P4T Manuel utilisateur
Planet
Planet MGSD-10080F Manuel utilisateur
Planet
Planet GS-5220 Series Manuel utilisateur
Planet
Planet IPOE-470 Manuel utilisateur
Planet
Planet WGSW-48000 Manuel utilisateur
Planet
Planet WH-2400M Manuel utilisateur
Planet
Planet FNSW-1600P Manuel utilisateur
Planet
Planet GSD-800S Manuel utilisateur
Planet
Planet WGSW-52040 Manuel utilisateur
Planet
Planet GSD-1008HP Manuel utilisateur
Planet
Planet FGSW-262 Manuel utilisateur
Planet
Planet FSD-503 Manuel utilisateur
Planet
Planet KVM-1600 Manuel utilisateur
Planet
Planet WGSW-28040 Manuel utilisateur
Planet
Planet SGSW-24040 Manuel utilisateur
Planet
Planet FSD-1603 Manuel utilisateur
Planet
Planet IGS-6325-16T4X Manuel utilisateur
Planet
Planet IFGS-1022TF Manuel utilisateur
Planet
Planet GSD-1020 Manuel utilisateur
Planet
Planet GSW-1602SF Manuel utilisateur
