Planet EPN-102 Manuel utilisateur

Networking & Communication

Quick Installation Guide

GEPON SFU ONU

EPN-102 / EPN-104

Important Safety Instructions



Do not use the GEPON ONU in high humidity or high

temperatures.



Do not use the same power source for the GEPON ONU

as other equipment.



Do not open or repair the case yourself. If the GEPON

ONU is too hot, turn off the power immediately and have it

repaired at a qualified service center.



Avoid using this product and all accessories outdoors.



Place the GEPON ONU on a stable surface.



Only use the power adapter that comes with the package.

Using a different voltage rating power adaptor may

damage the ONU.

Package Content

EPN-102 / EPN-104



EPN-102 / EPN-104 Unit



CD-ROM containing the user’s manual, quick guide



Quick Installation Guide



Power Adapter



RJ-45 cable x 1

If any of the above items are missing or damaged, contact your

local dealer for support.

-2-

Hardware Installation

Please connect the ONU to you devices as follow:

Connecting the RJ-45 network cable.

a. Plug-in the RJ-45 cable to 10/100/1000 GE Port

(EPN-102 only) or 10/100 FE Ports.

b. Plug-in the other side to your host or devices.

Connecting the fiber cable.

Before connecting, please note:

Keep the optical connector and the optical fiber clean.

Make sure the bending diameter of the fiber is more

than 6cm.Otherwise; the optical signal loss may be

increased.

Cover a protective cap to guard against dust and water

when the fiber is not used.

a. Remove the protective cap of the optical fiber.

b. Remove the protective cap of the ONU optical

interface (PON interface). Insert the fiber into the

PON interface.

Connecting Power Adapter.

a. Connect the power adapter to the power socket

on the ONU.

b. Insert the other end into a power outlet.

c. Turn on the power-switch.

-3-

Figure-1 EPN-102 connection diagram

Figure-2 EPN-104 connection diagram

-4-

Verifying the Installation

After power on the ONU, the Power LED will be bright and

system starts to boot. When system is ready, the PON LED will

be flash.

If the PON connection is normal, the PON LED will be off and

Link LED is ON.And then you can enjoy the high bandwidth

connection via PON technology.

Further Configuration

The above steps introduce simple installations and

configurations for EPN-102 / EPN-104. For further information of

Specification, features and applications etc, please refer to the

user’s manual in the CD. If you have other questions, please

contact the local dealer or distributor where you purchased this

product.

2011-BA0020-000

Autres manuels pour EPN-102

Table des matières

Autres manuels Planet Routeur réseau

Planet

Planet XRT-811 Manuel utilisateur

Planet

Planet PL-501-EU Manuel utilisateur

Planet

Planet FSD-401ST Manuel utilisateur

Planet

Planet XRT-401D Manuel utilisateur

Planet

Planet FSD-805 Manuel utilisateur

Planet

Planet WGSD-10020 Manuel utilisateur

Planet

Planet FNSW-2400PS Manuel utilisateur

Planet

Planet SW-804 Manuel utilisateur

Planet

Planet GSW-2400HPS Manuel utilisateur

Planet

Planet FGSD-1022VHP Manuel utilisateur

Planet

Planet IGS-20040MT Manuel utilisateur

Planet

Planet GPN-400ACV Manuel utilisateur

Planet

Planet SOHOConnect Series Manuel utilisateur

Planet

Planet FGSW-2402PVS Manuel utilisateur

Planet

Planet IGS-801T Manuel utilisateur

Planet

Planet WNAP-7335 Manuel utilisateur

Planet

Planet FGSW-2620VM Series Manuel utilisateur

Planet

Planet AND-4102 Manuel utilisateur

Planet

Planet FGSW-2620PVM Series Manuel utilisateur

Planet

Planet 85M Powerline Ethernet PL-201-KIT Manuel utilisateur

Planet

Planet WNRT-320GS Manuel utilisateur

Planet

Planet EH-2400 Manuel utilisateur

Planet

Planet IVR-100 Series Manuel utilisateur

Planet

Planet FNSW-2400PS Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité