Planet IGS-801T Manuel utilisateur

5/8-Port 10/100/1000Mbps

Industrial Gigabit Ethernet Switch

IGS-501 / IGS-801 / IGS-501T / IGS-801T

User's Manual

Trademarks

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other

trademarks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work

properly in all environments and applications, and makes no warranty

and representation, either implied or expressed, with respect to

the quality, performance, merchantability, or tness for a particular

purpose.

PLANET has made every effort to ensure that this User’s Manual is

accurate; PLANET disclaims liability for any inaccuracies or omissions

that may have occurred.

Information in this User’s Manual is subject to change without notice

and does not represent a commitment on the part of PLANET. PLANET

assumes no responsibility for any inaccuracies that may be contained in

this User’s Manual. PLANET makes no commitment to update or keep

current the information in this User’s Manual, and reserves the right

to make improvements to this User’s Manual and/or to the products

described in this User’s Manual, at any time without notice.

If you nd information in this manual that is incorrect, misleading, or

incomplete, we would appreciate your comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with

the Instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may

cause radio interference, in which case the user may be required to

take adequate measures.

WEEE Warning

To avoid the potential effects on the environment and human

health as a result of the presence of hazardous substances in

electrical and electronic equipment, end users of electrical

and electronic equipment should understand the meaning of

the crossed-out wheeled bin symbol. Do not dispose of WEEE as

unsorted municipal waste and have to collect such WEEE separately.

Revision

PLANET 5/8-Port 10/100/1000Mbps Industrial Gigabit Ethernet Switch

User's Manual

For Models: IGS-501 / IGS-801/ IGS-501T / IGS-801T

Revision: 1.0 (January, 2009)

Part No: EM-IGS-501_801_v1.0 (2350-AH0100-000)

Table Of Contents

1. INTRODUCTION ........................................................................ 6

1.1 Package Contents ............................................................... 6

1.2 How to Use This Manual ..................................................... 6

1.3 Product Features................................................................. 7

1.4 Product Specications ......................................................... 8

2. INSTALLATION .........................................................................10

2.1 Product Description ............................................................10

2.1.1 Product Overview ......................................................11

2.1.2 Switch Front Panel ....................................................11

2.1.3 LED Indicators ..........................................................12

2.1.4 Switch Upper Panel ...................................................13

2.1.5 Wiring the Power Inputs ............................................13

2.1.6 Wiring the Fault Alarm Contact...................................14

2.2 Mounting Installation..........................................................15

2.2.1 DIN-Rail mounting.....................................................15

2.2.2 Wall Mount Plate Mounting.........................................17

3. APPLICAITON ...........................................................................18

4. SWITCH OPERATION.................................................................20

4.1 Address Table....................................................................20

4.2 Learning ...........................................................................20

4.3 Forwarding & Filtering ........................................................20

4.4 Store-and-Forward .............................................................21

4.5 Auto-Negotiation................................................................21

5. TROUBLESHOOTING .................................................................22

APPENDIX A: NETWORKING CONNECTION.......................................23

A.1 Switch’s RJ-45 Pin Assignments ...........................................23

A.2 RJ-45 cable Pin Assignments ...............................................24

1. INTRODUCTION

1.1 Package Contents

Check the contents of your package for following parts:

Industrial Gigabit Ethernet Switch x 1

User's manual x 1

DIN rail kit x 1

Wall mount kit x 1

If any of these are missing or damaged, please contact your dealer

immediately, if possible, retain the carton including the original packing

material, and use them against to repack the product in case there is a

need to return it to us for repair.

1.2 How to Use This Manual

This Industrial Gigabit Ethernet Switch User Manual is structured as

follows:

Chapter 2 Installation

The chapter explains the feature, functionality and the physical

installation of the Industrial Gigabit Ethernet Switch.

Chapter 3 Application

The chapter explains the Industrial Gigabit Ethernet Switch application.

Chapter 4 Switch operation

The chapter explains the Industrial Gigabit Ethernet Switch transmit

operation.

Chapter 5 Troubleshooting

The chapter explains the troubleshooting of the Industrial Gigabit

Ethernet Switch.

Appendix A

This chapter contains cable information of the Industrial Gigabit

Ethernet Switch.

1.3 Product Features

Physical Port

5-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function (IGS-

501 / IGS-501T)

8-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function (IGS-

801 / IGS-801T)

Layer 2 Features

Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE

802.3ab 1000Base-T Ethernet standard

Supports Auto-negotiation and 10/100Mbps half / full duplex and

1000Mbps full duplex mode

High performance Store and Forward architecture, broadcast storm

control, runt/CRC ltering eliminates erroneous packets to optimize

the network bandwidth

Prevents packet loss with back pressure (Half-Duplex) and IEEE

802.3x PAUSE frame ow control (Full-Duplex)

Backplane (Switching Fabric): IGS-501 / IGS-501T: 10Gbps, IGS-801

/ IGS-801T: 16Gbps

Integrated address look-up engine, support 8K absolute MAC

addresses

136 kilobytes on-chip frame buffer on IGS-501 / IGS-501T

176 kilobytes on-chip frame buffer on IGS-801 / IGS-801T

9K Jumbo packet size support

Automatic address learning and address aging

CSMA/CD Protocol

Industrial Case / Installation

IP-30 Metal case / Protection

DIN Rail and Wall Mount Design

12 to 48V DC, redundant power with polarity reverse protect function

and connective removable terminal block for master and slave power

-10 to 60 Degree C operation temperature on IGT-501 / IGT-801

-40 to 75 Degree C operation temperature on IGT-501T / IGT-801T

1.4 Product Specications

Model IGS-501 IGS-801

Hardware Specication

10/100/1000Base-T Ports 5 8

Dimensions (W x D x H) 135mm x 87mm x 32mm

Weight 455g 473g

Power Requirement 12~48 VDC, Redundant power with polarity

reverse protection function

Power Consumption /

Dissipation 11.9 Watts / 40BTU 13.2 Watts / 45BTU

Installation DIN rail kit and wall mount ear

Switch Specication

Switch Processing

Scheme Store-and-Forward

Address Table 8K entries

Buffer 136 kilobytes 176 kilobytes

Flow Control Back pressure for half duplex, IEEE 802.3x

Pause Frame for full duplex

Switch fabric 10Gbps 16Gbps

Throughput

(packet per second) 7.4Mpps 11.9Mpps

Jumbo Frame 9K

Network cables

10/100/1000Base-T:

Cat. 3, 4, 5, 5e, 6 UTP cable (100meters,

max.)

EIA/TIA-568 100-ohm STP (100meters,

max.)

Standards Conformance

Standards Compliance

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3x Full-duplex ow control

Temperature Operating: -10~60 Degree C

Storage: -10~60 Degree C

Humidity Operating Operating: 5% to 90%, Storage: 5% to

90% (Non-condensing)

Regulation Compliance FCC Part 15 Class A, CE

Model IGS-501T IGS-801T

Hardware Specication

10/100/1000Base-T Ports 5 8

Dimensions (W x D x H) 135mm x 87mm x 32mm

Weight 455g 473g

Power Requirement 12~48 VDC, Redundant power with polarity

reverse protection function

Power Consumption /

Dissipation 11.9 Watts / 40BTU 13.2 Watts / 45BTU

Installation DIN rail kit and wall mount ear

Switch Specication

Switch Processing

Scheme Store-and-Forward

Address Table 8K entries

Buffer 136 kilobytes 176 kilobytes

Flow Control Back pressure for half duplex, IEEE 802.3x

Pause Frame for full duplex

Switch fabric 10Gbps 16Gbps

Throughput (packet per

second) 7.4Mpps 11.9Mpps

Jumbo Frame 9K

Network cables

10/100/1000Base-T:

Cat. 3, 4, 5, 5e, 6 UTP cable (100meters,

max.)

EIA/TIA-568 100-ohm STP (100meters,

max.)

Standards Conformance

Standards Compliance

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3x Full-duplex ow control

Temperature Operating: -40~75 Degree C

Storage: -40~75 Degree C

Humidity Operating Operating: 5% to 90%, Storage: 5% to

90% (Non-condensing)

Regulation Compliance FCC Part 15 Class A, CE

2. INSTALLATION

This section describes the functionalities of the Industrial Gigabit

Ethernet Switch’s components and guides how to install it on the

desktop. Basic knowledge of networking is assumed. Please read this

chapter completely before continuing.

In the following section, the term “Industrial Gigabit Ethernet Switch”

means the IGT-501 / IGT-801 / IGT-501T / IGT-801T.

2.1 Product Description

The PLANET IGT-501 / IGT-801 / IGT-501T / IGT-801T is 5/8-Port

10/100/1000Mbps Industrial Gigabit Ethernet Switch with non-blocking

wire-speed performance and new slim type with IP 30 metal shape for

easily deployment in Heavy Industrial demanding environments.

With a 10/16Gbps internal switching fabric, the Industrial Gigabit

Ethernet Switch can handle extremely large amounts of data in a

secure topology linking to a backbone or high capacity servers.

The Industrial Gigabit Ethernet Switch has 8K MAC Address table and

offers wire-speed packets transfer performance without risk of packet

loss. The Gigabit ports with 9K jumbo packet support can handle

large amounts of data transmission in a secure topology linking to a

backbone or high-power servers. The high data throughput of the

device makes it ideal for most Gigabit environments.

All RJ-45 copper interfaces support 10/100/1000Mbps Auto-Negotiation

for optimal speed detection through RJ-45 Category 6, 5 or 5e cables.

Support standard for Auto-MDI/MDI-X that can detect the type of

connection to any Ethernet device without requiring special straight or

crossover cables.

The Flow Control function allows Industrial Gigabit Ethernet Switch

supported routers and Servers to directly connect to this device for

fast, reliable data transfer.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Planet Routeur réseau

Planet

Planet XRT-101A Manuel utilisateur

Planet

Planet VIP-462DG Manuel utilisateur

Planet

Planet IGS-6325 DIN rail Series Manuel utilisateur

Planet

Planet WDAP-C7210E Manuel utilisateur

Planet

Planet XRT-401F Manuel utilisateur

Planet

Planet ISW-800M Manuel utilisateur

Planet

Planet ERT-805 Manuel utilisateur

Planet

Planet WNRT-625G Manuel utilisateur

Planet

Planet ADW-4301A/B Manuel utilisateur

Planet

Planet FSD-1603 Manuel utilisateur

Planet

Planet FGSW-2402PVS Manuel utilisateur

Planet

Planet GSW-2400HPS Manuel utilisateur

Planet

Planet VRT-402N Manuel utilisateur

Planet

Planet FGSD-1022 Manuel utilisateur

Planet

Planet XRT-401D Manuel utilisateur

Planet

Planet PL-501-EU Manuel utilisateur

Planet

Planet IGS-620TF Manuel utilisateur

Planet

Planet EPN-102 Manuel utilisateur

Planet

Planet GSD-800S Manuel utilisateur

Planet

Planet G.SHDSL.bis Bridge Router GRT-504 Manuel utilisateur

Planet

Planet WSD-800 Manuel utilisateur

Planet

Planet GS-4210-24P2S Manuel utilisateur

Planet

Planet FNSW-1601 Manuel utilisateur

Planet

Planet GSW-1602SF Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité