Philips SRU 7040/10 Manuel utilisateur

SRU 7040/10

Quick, Clean & Easy Setup

www.philips.com/urc

Instructions for use 4

Mode d'emploi 13

Bedienungsanleitung 22

Gebruiksaanwijzing 31

Vejledning 40

Bruksanvisning 49

Bruksanvisning 58

Käyttöohjeet 67

Instruzioni per l'uso 76

Instrucciones de

utilización 85

Manual de utilização 94

Contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Replacing the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10

Learn a key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Adjusting device selection (Mode-selector) . . . . . . . . . . . . . . . . . . . . . . . 10

Adding a remote control function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Assigning the volume control to another mode . . . . . . . . . . . . . . . . 10-11

Restoring the original remote control settings . . . . . . . . . . . . . . . . . . . . 11

5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Code list of all brands/equipment . . . . . . . . . . . . . . . . . . . . . . . . . . 103-126

Information to the consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

1. Introduction

Congratulations on your purchase of the Philips SRU 7040 universal remote

control. After installing the remote control you can operate a maximum of

4 different devices with it:TV, DVD player/recorder or video recorder,

STB (settop box, satellite or cable decoder) and amplifier/receiver.You can

find information about how to prepare this remote control for use in the

chapter ‘Installing the remote control’.

2. Installing the remote control

•Batteries are already placed in the battery compartment of the

SRU 7040. Just remove the protective foil from the batteries and the

SRU 7040 is ready for use.

•If the indicator LEDs (TV, DVD/VCR, STB and AMP) blink four times

after every key press, the remote control is indicating that its batteries

are running low. Replace the old batteries with new CR2025 Lithium

batteries. See ‘Replacing the batteries’.

Replacing the batteries

1Press the edge of the battery compartment

as shown. Keep the edge pressed and slide

the compartment outwards.

2Place two new CR2025 Lithium batteries

into the battery compartment, as shown.

Make sure to place the text side of the

batteries upwards.

3Slide the compartment back and click it firmly

into place.

Instructions for use

English

Instructions for use

English

Testing the remote control

The remote control has been programmed to operate most Philips devices.

Because the SRU 7040 may use different signals for each brand and even for

different models of the same brand, it is advisable to test whether your

device responds to the SRU 7040.The example below (TV) instructs you

how to do this.You can repeat the same steps for other devices (DVD, video

recorder, etc.) which you want to operate using the SRU 7040.

Example of TV:

1Turn your TV on manually or use the original remote control.

Tune to channel 1.

2Press the SELECT key to select TV.

Press the key until the TV LED lights up.

If the LED does not light up, check whether the

batteries are properly inserted (see ‘Replacing

the batteries’).

3Check whether all keys are working.

For an overview of the keys and their

functions see ‘3. Keys and functions’.

– If the TV responds as it should to all of the

key commands the SRU 7040 is ready for use.

• If the device does not respond at all or not to all of the key

commands, follow the instructions under ‘Setting the remote

control’, or for online setup go to: www.philips.com/urc

Setting the remote control

This is only necessary if your device does not respond to the SRU 7040.

If that is the case, the SRU 7040 does not recognize the brand and/or model

of your device and you need to program the remote control to do so.

The example below (TV) instructs you how to do this.You can repeat the

same steps for other devices (DVD, video recorder, etc.) which you want to

operate using the SRU 7040.

Note:The second mode (DVD/VCR) can be used either for operating your

DVD player/recorder or your VCR (videorecorder).

Automatically setting the remote control

The remote control will now automatically search for the right code for your

device.

Example of TV:

1Make sure the TV is switched on and select a channel using the original

remote control or the keys on the TV (for example channel 1).

The SRU 7040 emits the ‘switch off TV’ signal for all models of TV that

are stored in the memory.

•If the device is a DVD player/recorder or video recorder, insert a disk or

tape and start playback.

2Press the SELECT key to select TV.

Press the key until the TV LED lights up.

3Then keep keys 1 and 3 pressed

simultaneously for three seconds until the TV

LED flashes twice and then remains lit.

4Press and hold the Standby key of the

SRU 7040.

– The SRU 7040 now starts emitting all known

‘TV off’ signals, one by one.

Each time a code is sent, the TV LED

lights up.

5When your TV switches off (stand-by), release

the Standby key of the SRU 7040 immediately.

– The SRU 7040 has now found a code that

works on your TV.

6Check if you can operate all functions on your TV with the SRU 7040.

• If this is not the case, you can redo the automatic setting.

The SRU 7040 will then search for a code that works better.

– After the SRU 7040 has run through all the known codes, the search

will stop automatically and the TV LED will stop flashing.

– Automatic programming of a TV takes a maximum of 5 minutes.

For DVD/VCR, STB and AMP this time is 2 minutes.

Instructions for use

English

Manually setting the remote control

Example of TV:

1Turn on the TV manually or use the original remote control.

Tune in to channel 1.

2Look up the brand of your TV in the code list

at the back of this manual. One or more

four-figure codes are shown for each brand.

Note the first code.

Be careful! There are separate tables for TV,

video, DVD, etc.

On our website www.philips.com/urc you can directly select your device

typenumber to find the tight code.

Make sure you use the codes from the correct table.

3Press the SELECT key to select TV.

Press the key until the TV LED lights up.

4Keep keys 1 and 3 pressed simultaneously

for three seconds until the TV LED flashes

twice and then remains lit.

5Then enter the code noted in step 2 using the digit keys.

– The TV LED key will now flash twice.

If the LED flashes once for an extended period, the code has not been

entered properly or the wrong code has been entered.

Start again from step 2.

6Point the SRU 7040 at the TV and check that it responds as it should.

– If the TV responds to all of the key commands, the SRU 7040 is ready

for use. Do not forget to note your code.

• If the device does not respond at all, or not to all of the

key commands, start again from step 2 and try the next code

from the list.

Instructions for use

English

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions.

1yStandby. . . . . . . . . switches TV, DVD/VCR, STB and AMP on or off.

2Indicator LEDs

3LEARN . . . . . . . . . . . switches the SRU 7040 into learning mode.

4- teletext on/off (disc menu)

- text hold

- record (VCR/DVD)

- wide screen TV

- text off

- red teletext key

- rewind (VCR/DVD)

- green teletext key

- stop (VCR/DVD)

- yellow teletext key

- pause (VCR/DVD)

- blue teletext key

- wind (VCR/DVD)

5MENU . . . . . . . . . . . . turns the menu on and off.

6Cursor keys. . . . . . . cursor up, down, left, right in a menu.

7AV . . . . . . . . . . . . . . . . switches between external inputs of your

equipment.

82. . . . . . . . . . . . . . . . . play (VCR/DVD)

9- VOL + . . . . . . . . . . . adjusts the TV or AMP volume.

0Digit keys . . . . . . . . . - direct choice of channels and other functions.

- source selection keys in amplifier mode

(together with SHIFT).

!SHIFT . . . . . . . . . . . . for extra functions. When pressed at the same

time as a second key, the second key will get

another function. For example:

SHIFT + . . . . . . installs your TV.

SHIFT + . . . . . . stores TV settings.

Try out other combinations with the Shift-key on your device in order to find

out which functions are available.

Only functions featured on the original remote control are available.

@/. . . . . . . . . . . . . . . . selects between one- and two-figure channel

numbers.

#22/ SURROUND . selects previous programme/channel.

selects surround modes.

$- PROG + . . . . . . . . . selects a previous or following channel.

%s. . . . . . . . . . . . . . . . . mutes the sound of the TV or DVD.

^OK . . . . . . . . . . . . . . . confirms your selection.

&BACK. . . . . . . . . . . . . jumps back one level in the menu or turns off the

menu.

*SELECT . . . . . . . . . . selects TV, DVD/VCR, STB or AMP mode.

If the device does not respond at all, or not to all of the key

commands, follow the instructions under ‘Setting the remote control’.

It is possible that you must enter another code for the device.

Instructions for use

English

4. Extra possibilities

Learn a key

If you miss certain functions from your original remote control on the

SRU 7040, the SRU 7040 can learn these functions from the original remote

control.You can store a fuction under any of the available keys of the

SRU 7040, except LEARN, SELECT and SHIFT. Please, note that any function

already stored under a key will be deleted.

Example for VCR:

Make sure you have the original VCR remote control at hand.

1Press the SELECT key to select VCR.

Press the key until the VCR LED lights up.

2Press the LEARN key and the target key on

the SRU 7040 simultaneously for 5 seconds,

until the VCR LED blinks twice and then

remains lit.

3Place both remote controls on a flat surface

(like a coffee table) and aim them head-to-

head with about 5 - 10 cm in between.

4Press the button you want to copy on the original remote control.

– If the SRU 7040 has learned the code, the VCR LED blinks twice to

confirm the signal is stored.

– If the LED blinks once for a longer period, the IR signal is not learned by

the SRU 7040. Please, try a few times and make sure the remote

controls are aligned as described in step 3.

If the SRU 7040 cannot learn the code after several times trying,

it is possible that:

– The IR signal of your original device is out of range (the SRU 7040 can

only learn IR signals with a carrier signal of 30-60kHz.

– The memory of the SRU 7040 is full.

– The SRU 7040 stopped the learning process after 20 seconds if no

IR signals are found. Check if your original remote control is working

correctly.

Instructions for use

English

Adjusting device selection (Mode selector)

The SRU 7040 is default set for operating TV, DVD (or VCR) STB (settop

box, satellite or cable decoder) and AMP (amplifier).You can select the device

you wish to operate with the SELECT key (mode selector). Each option

allows operation of one device only. If desired, you can program the SELECT

key (mode selector) to select a different kind of device. For example, if you

want to operate a second TV. In the following example you will see how to

configure the STB mode for a second TV.

1Switch on the second TV.

2Press the SELECT key to select STB.

Press the key until the STB LED lights up.

3Then keep keys 1 and 6 on the SRU 7040

pressed simultaneously for three seconds,

until the STB LED lights up.

4Press keys 9, 9 and 2 in that order.

5Press the SELECT key to select TV.

Press the key until the TV LED lights up.

6Press the 1 key.

– The STB LED flashes twice.

STB will now allow you to operate your

second TV.

7Program the SRU 7040 to operate the second TV.

See ‘Setting the remote control’.

Adding a function to the remote control

If you want to add a function to the SRU 7040, you can contact the

Philips service line for Universal Remote Control to ask for the 5-figure code

for the extra function.

Assigning the volume control to another mode

The volume controls (Vol +,Vol - and s) on the SRU 7040 are assigned to

either your TV or your amplifier/receiver, depending on the device you have

selected:

Instructions for use

English

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Philips Télécommande

Philips

Philips KWR164501/01 Manuel utilisateur

Philips

Philips SBCRU980/05 Manuel utilisateur

Philips

Philips ProntoTSU9800 Manuel utilisateur

Philips

Philips Prestigo SRU8015 Manuel utilisateur

Philips

Philips SRU 740/10 Manuel utilisateur

Philips

Philips Perfect replacement SRU5107WM Manuel utilisateur

Philips

Philips Pronto TSU9300 Guide de sécurité

Philips

Philips SRU 520/86 Manuel utilisateur

Philips

Philips SBCRU510/87B Manuel utilisateur

Philips

Philips SRU1060/10 Manuel utilisateur

Philips

Philips SBC RU 440 Manuel utilisateur

Philips

Philips PH750 Manuel utilisateur

Philips

Philips TSU6000 Manuel utilisateur

Philips

Philips MAGNAVOX PR1911B Manuel utilisateur

Philips

Philips Home Power SPC1241AT/27 Manuel utilisateur

Philips

Philips SBC RU 252 Manuel utilisateur

Philips

Philips Perfect replacement SRC3036WM Manuel utilisateur

Philips

Philips CRP608/01 Manuel utilisateur

Philips

Philips SRP2002/10 Manuel utilisateur

Philips

Philips SRP5004/87 Manuel utilisateur

Philips

Philips SRM7500 Manuel utilisateur

Philips

Philips Perfect replacement SRP2003 Manuel utilisateur

Philips

Philips SRU 560/87 Manuel utilisateur

Philips

Philips Perfect replacement SRC3036WM/17 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation