Philips SBCRU530/88 Manuel utilisateur

Your Remote Control

VotreTélécommande

Ihre Fernbedienung

Uw afstandsbediening

Din fjärrkontroll

Kauko-ohjaimesi

Din fjernbetjening

Din fjernkontroll

Universal

XP SBC RU 530/00 31-05-2001 16:02 Pagina 1

You just made a great choice by buying this Philips universal

remote control! It takes the place of as many as three

separate remote controls and can operate the most-used

functions of almost any brand of TV, VCR and satellite tuner/

cable decoder.

Installing the batteries

Your SBC RU 530 needs two 1.5V batteries, type R03, UM4 or

AAA.

Put them in like this:

KEYS & FUNCTIONS

Power: to switch TV/VCR/SAT on and off.

Mode Selector: to select TV, VCR or Satellite mode.

Mute: to switch the TV sound on and off.

Channel Up/Down: to select next / previous channel.

Volume Up/Down: to control the TV volume.

Number Keys: for direct channel selection and other functions.

To switch between one and two-digit channel selection and

display.

SHIFT: to get access to additional functions (press together

with other function keys). Depending on the age of

your equipment, the result is for example:

SHIFT + PROG+: increases brightness or menu up function

SHIFT + PROG-: decreases brightness or menu down function

SHIFT + VOL+: increases colour or menu right function

SHIFT + VOL-: decreases colour or menu left function

To operate menu control.

To confirm your selection.

Instructions for use

English

TIP

• Remember to replace the batteries at least once a year.

• Don’t leave the batteries out for longer than one hour,

otherwise you will need to set-up the SBC RU530 again.

PROG PROG

VOL

9-0

SHIFT

TV VCR SAT

XP SBC RU 530/00 31-05-2001 16:02 Pagina 2

Try other shift/key combinations on your equipment to

discover which functions are available.

Remember that you can’t get access to additional functions if

these functions were not available on the original remote

control of your equipment!

To switch on teletext.

To enlarge the teletext display on screen.

To stop changing teletext pages.

To switch off teletext.

If you use the memory out key (ﬁ) to access the next

teletext page on your Philips TV, see Troubleshooting.

Fasttext VCR

Red Rewind

Record

Green Stop

Yellow Play

Blue Forward

Pause

SET-UP FOR USE

ADVICE

Carefully read the complete procedure before starting!

Your equipment is a Philips brand:

1Press the mode selector key for the device you want to

operate.

2 Press the power key to test.

– The green indicator LED under each device (TV, VCR or

SAT) lights up to confirm the mode you’re in.

CHECK

Press a few keys to check correct response. If response is not

correct, go to the next paragraph.

Instructions for use

English

TV VCR SAT

XP SBC RU 530/00 31-05-2001 16:02 Pagina 3

Your equipment is of another brand, or your

equipment is a Philips brand, but not all keys

respond correctly:

1 Press the mode selector key to select the device (TV, VCR

or SAT) you want to operate.

2Look up the brand name of the device you want to

operate in the code list (centre of this manual).

Make sure you choose the correct code list for your device!

3Make sure the device is switched on.

4Press and hold keys 1 and 3 simultaneously - for about

three seconds- until the green LED lights up. (Release the

keys: the green LED should stay on)

5Enter your 4-digit code using the number keys, within

30 seconds.

– The green LED flashes twice.

CHECK

That’s it! Press a few keys to check correct response. If

response is not correct, repeat procedure beginning at step 1,

using the next 4-digit code from the codelist.

NOTE

- If the LED displays one long flash, the code was not

recognised. Please go back to step 1 and repeat the

procedure, using the next 4-digit code in the list.

- If no key is pressed within 30 seconds, you have to start

again at step 1.

- If no correct code is in the list, go to the next paragraph.

You do not know the brand of your

equipment/you can not find the right code in

the code list » auto search:

1Press the mode selector key to select the device (TV, VCR

or SAT) you want to operate.

2Make sure the device is switched on (if the device is a

VCR, please insert a tape and start playback).

3Press and hold keys 1 and 3 simultaneously -for about

three seconds- until the green LED lights up.

(Release the keys: the green LED should stay on)

4Press the power key to start the search. Make sure that

you keep the remote control pointed at your equipment.

– Each time the green LED flashes, another code is sent.

When the right code is found, the equipment switches off

(VCR stops playback). Immediately press the power key to

stop the search.

If the green LED flashed again after the equipment

switched off, this means you missed the correct code!

If you missed the code, follow the next procedure, starting

at step 5. If the LED did not flash again after the

equipment switched off, go to step 7.

5Switch the equipment manually back on.

6Press ‘PROG-’ (down only!) repeatedly to send previous

codes until the equipment switches off again.

Instructions for use

English

9-0

1 3

PROG

TV VCR SAT

XP SBC RU 530/00 31-05-2001 16:02 Pagina 4

7Press the power key to lock the correct code in the SBC

RU530’s memory.

– The green LED flashes twice.

HECK

Switch equipment on manually. Press a few keys to check correct

response. If response is not correct, repeat procedure beginning

at step 1.

OTE

- The search time averages about 90 seconds. (Maximum search

time is 5 minutes for TV, 2 minutes for VCR and 4 minutes for

SAT).

- Autosearch stops automatically after all codes have been

tested.

MAKE A NOTE OF YOUR CODE!

DVICE

Carefully read the complete procedure before starting!

Note the code inside the battery case and in the codelist in

the centre of this booklet. This may be useful if you ever need

to set up the SBC RU530 again. You used the auto search

procedure or you forgot to note the code after set up? No

problem! You can still ‘read out’ the code from the remote:

1Make sure you’ve selected the right mode with the mode

selector key.

2Press and release keys 1 and 6 simultaneously.

Important: after pressing the keys, you have to release them

immediately!

– The green LED lights up.

3Press the two digits key.

– The green LED goes out.

4Press key 1 and count the number of times the green LED

flashes. This is the first digit of the 4-digit code. (No

flashes means the digit is zero.)

5Press key 2 and count the number of flashes for the second

digit.

6Press key 3 and count the number of flashes for the third

digit.

7Press key 4 and count the number of flashes for the forth

digit.

8Note the code.

Instructions for use

English

1 6

TV VCR SAT

XP SBC RU 530/00 31-05-2001 16:02 Pagina 5

ADVANCED TIPS AND TRICKS

ADVICE

Carefully read the complete procedure before starting!

Changing the device keys

With the mode selector it is possible to select 3 categories of

devices you want to operate. Each category (TV, VCR and SAT)

is meant to operate a specific group of equipment:

TV VCR SAT

tv vcr sat

cable

Once you have programmed the functions of a device in one

of the categories, it is not possible to program another device

in the same category. There is, however, a solution in case

you want to program two devices in the same category

(2 TV’s, VCR’s, etc.). The following example explains how.

EXAMPLE:

The SAT mode on this remote control is factory preset to

control many Philips satellite receivers. You can change the

SAT mode (or any mode) to operate another type of device.

The following example shows you how to use the SAT mode to

operate a second TV:

1Press the mode selector key to select SAT and make sure

the second TV is switched on.

2Press and hold keys 1 and 6 simultaneously - for about

3 seconds - until the green LED lights up.

3On the keypad, press keys 9, 9 and 2.

4Press the mode selector key to select TV mode.

5Press key 1.

– The LED flashes twice to indicate successful set up.

That’s it!

Don’t forget to set up the SBC RU530 to operate this second

TV. See the section Set-up for use.

Punch-Through Sound

Punch-through sound enables you to control the audio level of

your first or second TV, regardless of what device mode the

remote control is in.

EXAMPLE:

You have installed a second TV under SAT mode. You can

control that TV’s volume when you are in VCR mode. This

feature is installed as a default setting for a first TV.

To install this feature for a second TV:

Instructions for use

English

1 6

TV VCR SAT

9 9 2

XP SBC RU 530/00 31-05-2001 16:02 Pagina 6

1Press the mode selector key to select VCR.

2Press and hold keys 1 and 6 simultaneously -for about 3

seconds - until the green LED lights up.

3On the keypad, press keys 9, 9, and 3.

4Press the mode selector key to select SAT (second TV).

5Press the power key.

– That’s it! The LED flashes twice to indicate successful set up.

The Volume up/down keys now control the volume of your

second (SAT) TV when you’re in VCR mode.

Add a specific function to your remote control

In case you do not find the function you want to use (e.g. a

specific teletext function), it can easily be added to your

remote control’s functionality. All you have to do is contact

the Philips Universal Remote Control helpline to obtain the 3-

digit code for the missing function. The rest of the procedure

is quite simple:

1Press the mode selector key for the device you want to

operate.

2Pres

s and hold keys 1 and 6 simultaneously - for about

three seconds - until the green LED lights up.

3Enter 9, 9 and 4, using the number keys.

4Enter the 3-digit code you received from the helpline

using the number keys, within 30 seconds.

5Press the key under which you want to store the new

function. The LED flashes twice to indicate a succesfull

installation.

If you want to store the function under a Shift/Key

combination; first press Shift, then press the required

function key.

OTE

- The original function of the key will be overwritten. If you

want to return to its original function see the following section

about resetting.

- Remember: no functions can be performed by this remote

control that are not present on the equipment you are

operating!

Reset your remote control to its original

presets:

If you want to return to the original functions of all keys and

delete all added functions under programmed keys a simple

reset procedure is sufficient:

1Pres

s and hold keys 1 and 6 simultaneously - for about

three seconds - until the green LED lights up.

2Enter 9, 8 and 1, using the number keys.

The LED flashes twice to indicate a succesfull reset.

The keys on your remote control will now perform their

default functions.

Instructions for use

English

1 6

9 9 3

1 6

9 9 4

9-0

SHIFT

1 6

9 8 1

TV VCR SAT

XP SBC RU 530/00 31-05-2001 16:02 Pagina 7

TROUBLESHOOTING GUIDE

• Problem:

– Solution:

• Device is not responding and the green light does not flash

when you press a button.

– Replace batteries with two new 1.5 volt, type RO3, UM4 or

AAA batteries.

• Device is not responding, but the green light does flash when

you press a button.

– Aim the SBC RU530 at the device and be sure that there are

no obstructions between the SBC RU530 and the device.

• The SBC RU530 is not performing commands properly.

– You may be using the wrong code. Try repeating Set up using

another code, listed under your brand, or start the Autosearch

Set-up over again to locate the proper code.

If the device still doesn’t respond, call the help-line and we’ll

put you back on track.

• You can’t access teletext pages and you were used to use this

(ﬁ) button to access teletext.

– Follow Set up procedure and at step 5 of section “Your

equipment is of another brand, or your equipment is a Philips

brand, but not all keys respond correctly” press keys

0, 0, 6 and 4.

To enter teletext pages, press the teletext cancel button.

• The teletext buttons do not work.

– Be sure your TV has teletext capabilities. The SBC RU530 does

not extend the capabilities of your TV!

• Having problems operating all the functions on your device.

– The SBC RU530 may just need customising for your model

type. Just call our help-line and we’ll put you back on track.

• Your brand is not listed in the code list.

– Try the hands-free Autosearch method.

• You want to reset the remote control to its factory preset.

– 1 Press and hold keys 1 and 6 simultaneously - for about

3 seconds - until the green LED lights up.

– 2 On the keypad, press keys 9, 8, and 1.

The LED flashes twice to indicate a successful reset.

Instructions for use

English

1 6

9 8 1

XP SBC RU 530/00 31-05-2001 16:02 Pagina 8

NEED HELP?

If you have any questions about the SBC RU530, please call

our help-line for assistance! You can find the number in the

code list section of this booklet.

Before you call, please read this manual carefully. You will be

able to solve most of your problems. If you don’t find an

answer to your questions, make a note of your equipment in

the table at the back of the code list section of this booklet.

This makes it easier and faster for our operators to help you.

Look for the model numbers in the equipment instruction

manual, or on the back of your equipment. When calling our

help-line please have your equipment close by, so our operators

can help you verify the functionality of your remote control.

The model number of your Philips universal remote control is:

SBC RU530

Date of purchase: _____/_____/______

day/month/year

Instructions for use

English

XP SBC RU 530/00 31-05-2001 16:02 Pagina 9

Vous avez fait le meilleur choix en achetant la télécommande

universelle de Philips! Elle peut remplir les fonctions de trois

télécommandes et effectuer les commandes les plus usuelles

de presque toutes les marques de téléviseur, de magnétoscope

et de décodeur de télévision par satellite / par câble.

Installation des piles

Votre télécommande SBC RU 530 fonctionne à l’aide de deux

piles de 1,5V de type R03, UM4 ou AAA.

Installez-les de la manière suivante:

TOUCHES & FONCTIONS

Mise en marche: pour mettre sous et hors tension votre tv,

VCR (magnétoscope), sat.

Sélection du mode: pour sélectionner le mode télévision,

magnétoscope ou satellite.

Silence: pour couper ou remettre le son de la télévision.

Canal +/-: pour sélectionner le canal précédent/suivant.

Volume +/-: pour régler le volume de la télévision.

Touches à chiffres: pour sélectionner directement une chaîne

ou pour les autres fonctions.

Pour passer d’un canal à un chiffre à un canal à deux chiffres

et sélectionner la chaîne correspondante.

SHIFT (déplacement): pour accéder aux autres fonctions

(appuyer sur cette touche en même temps qu’une autre

touche de fonction). Suivant l’âge de votre équipement, vous

pouvez entre autres disposer des fonctions suivantes:

SHIFT + PROG+: augmente la luminosité ou permet d’avancer

dans le menu

SHIFT + PROG-: réduit la luminosité ou permet de descendre

dans le menu

Mode d’emploi

Français

AVIS

• Veillez à remplacer les piles au moins une fois par an.

• Ne retirez pas les piles de votre télécommande pendant

plus d’une heure, ou il vous faudra effectuer de nouveau

tous les réglages.

PROG PROG

VOL

9-0

SHIFT

TV VCR SAT

XP SBC RU 530/00 31-05-2001 16:02 Pagina 10

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Philips Télécommande

Philips

Philips SBCRP420/00 Manuel utilisateur

Philips

Philips SRP2024A/27 Manuel utilisateur

Philips

Philips SRP4004/87 Manuel utilisateur

Philips

Philips SBC RU 510 Manuel utilisateur

Philips

Philips SRP5004/53 Manuel utilisateur

Philips

Philips SRP2003WM Manuel utilisateur

Philips

Philips SRU 520/86 Manuel utilisateur

Philips

Philips Pronto TSU9300 Guide de sécurité

Philips

Philips SRU4006/27 Manuel utilisateur

Philips

Philips Perfect replacement SRP1003/27 Manuel utilisateur

Philips

Philips Pronto TSU9200 Guide de sécurité

Philips

Philips RC4284504/01RP Manuel utilisateur

Philips

Philips SRU3003/27 Manuel utilisateur

Philips

Philips SRP2018/27 Manuel utilisateur

Philips

Philips SRP5002/10 Manuel utilisateur

Philips

Philips SBCRU610/00 Manuel utilisateur

Philips

Philips SBC RU 252/00H Manuel utilisateur

Philips

Philips SRP1103/27 Manuel utilisateur

Philips

Philips SRP6220R/27 Manuel utilisateur

Philips

Philips SRU2103S/27 Manuel utilisateur

Philips

Philips KWR101830/01B Manuel utilisateur

Philips

Philips SRU3006 Manuel utilisateur

Philips

Philips SRU4105WM - Universal Remote Control Manuel utilisateur

Philips

Philips SRP620/10 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation